Re: [PATCH v3 12/12] vfio/pci: Report dev_id in VFIO_DEVICE_GET_PCI_HOT_RESET_INFO

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, 7 Apr 2023 13:24:25 +0000
"Liu, Yi L" <yi.l.liu@xxxxxxxxx> wrote:

> > From: Alex Williamson <alex.williamson@xxxxxxxxxx>
> > Sent: Friday, April 7, 2023 8:04 PM
> >   
> > > > > > @@ -791,7 +813,21 @@ static int vfio_pci_fill_devs(struct pci_dev *pdev, void  
> > > > *data)  
> > > > > >  	if (!iommu_group)
> > > > > >  		return -EPERM; /* Cannot reset non-isolated devices */  
> 
> [1]
> 
> > > > >
> > > > > Hi Alex,
> > > > >
> > > > > Is disabling iommu a sane way to test vfio noiommu mode?  
> > > >
> > > > Yes
> > > >  
> > > > > I added intel_iommu=off to disable intel iommu and bind a device to vfio-pci.
> > > > > I can see the /dev/vfio/noiommu-0 and /dev/vfio/devices/noiommu-vfio0. Bind
> > > > > iommufd==-1 can succeed, but failed to get hot reset info due to the above
> > > > > group check. Reason is that this happens to have some affected devices, and
> > > > > these devices have no valid iommu_group (because they are not bound to vfio-  
> > pci  
> > > > > hence nobody allocates noiommu group for them). So when hot reset info loops
> > > > > such devices, it failed with -EPERM. Is this expected?  
> > > >
> > > > Hmm, I didn't recall that we put in such a limitation, but given the
> > > > minimally intrusive approach to no-iommu and the fact that we never
> > > > defined an invalid group ID to return to the user, it makes sense that
> > > > we just blocked the ioctl for no-iommu use.  I guess we can do the same
> > > > for no-iommu cdev.  
> > >
> > > I just realize a further issue related to this limitation. Remember that we
> > > may finally compile out the vfio group infrastructure in the future. Say I
> > > want to test noiommu, I may boot such a kernel with iommu disabled. I think
> > > the _INFO ioctl would fail as there is no iommu_group. Does it mean we will
> > > not support hot reset for noiommu in future if vfio group infrastructure is
> > > compiled out?  
> > 
> > We're talking about IOMMU groups, IOMMU groups are always present
> > regardless of whether we expose a vfio group interface to userspace.
> > Remember, we create IOMMU groups even in the no-iommu case.  Even with
> > pure cdev, there are underlying IOMMU groups that maintain the DMA
> > ownership.  
> 
> hmmm. As [1], when iommu is disabled, there will be no iommu_group for a
> given device unless it is registered to VFIO, which a fake group is created.
> That's why I hit the limitation [1]. When vfio_group is compiled out, then
> even fake group goes away.

In the vfio group case, [1] can be hit with no-iommu only when there
are affected devices which are not bound to vfio.  Why are we not
allocating an IOMMU group to no-iommu devices when vfio group is
disabled?  Thanks,

Alex




[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [Kernel Development]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Info]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Linux Media]     [Device Mapper]

  Powered by Linux