> From: Tian, Kevin <kevin.tian@xxxxxxxxx>
> Sent: Friday, March 10, 2023 6:07 PM
>
> > From: Liu, Yi L <yi.l.liu@xxxxxxxxx>
> > Sent: Friday, March 10, 2023 5:58 PM
> >
> > > From: Tian, Kevin <kevin.tian@xxxxxxxxx>
> > > Sent: Friday, March 10, 2023 5:02 PM
> > >
> > > > From: Liu, Yi L <yi.l.liu@xxxxxxxxx>
> > > > Sent: Wednesday, March 8, 2023 9:29 PM
> > > > +
> > > > +static int vfio_device_cdev_probe_noiommu(struct vfio_device
> *device)
> > > > +{
> > > > + struct iommu_group *iommu_group;
> > > > + int ret = 0;
> > > > +
> > > > + if (!IS_ENABLED(CONFIG_VFIO_NOIOMMU) || !vfio_noiommu)
> > > > + return -EINVAL;
> > > > +
> > > > + if (!capable(CAP_SYS_RAWIO))
> > > > + return -EPERM;
> > > > +
> > > > + iommu_group = iommu_group_get(device->dev);
> > > > + if (!iommu_group)
> > > > + return 0;
> > > > +
> > > > + /*
> > > > + * We cannot support noiommu mode for devices that are
> > > protected
> > > > + * by IOMMU. So check the iommu_group, if it is a no-iommu group
> > > > + * created by VFIO, we support. If not, we refuse.
> > > > + */
> > > > + if
> > > (!vfio_group_find_noiommu_group_from_iommu(iommu_group))
> > > > + ret = -EINVAL;
> > > > + iommu_group_put(iommu_group);
> > > > + return ret;
> > >
> > > can check whether group->name == "vfio-noiommu"?
> >
> > But VFIO names it to be "vfio-noiommu" for both
> VFIO_EMULATED_IOMMU
> > and VFIO_NO_IOMMU. And we don't support no-iommu mode for
> emulated
> > devices since VFIO_MAP/UNMAP, pin_page(), dam_rw() won't work in
> the
> > no-iommu mode.
>
> correct.
>
> >
> > So maybe something like below in drivers/vfio/vfio.h. It can be used
> > to replace the code from iommu_group_get() to
> > vfio_group_find_noiommu_group_from_iommu() In my patch.
> >
> > #if IS_ENABLED(CONFIG_VFIO_GROUP)
> > static inline bool vfio_device_group_allow_noiommu(struct vfio_device
> > *device)
> > {
> > lockdep_assert_held(&device->dev_set->lock);
> >
> > return device->group->type == VFIO_NO_IOMMU;
> > }
> > #else
> > static inline bool vfio_device_group_allow_noiommu(struct vfio_device
> > *device)
> > {
> > struct iommu_group *iommu_group;
> >
> > lockdep_assert_held(&device->dev_set->lock);
> >
> > iommu_group = iommu_group_get(device->dev);
> > if (iommu_group)
> > iommu_group_put(iommu_group);
> >
> > return !iommu_group;
> > }
> > #endif
>
> this makes sense.
Just have one more think. vfio_device_is_noiommu() is already able
to cover above vfio_device_group_allow_noiommu(), just needs
to make it work when !VFIO_GROUP. In the group code, group->type
== VFIO_NO_IOMMU means vfio_noiommu==true. So no need to
check it. While in the case !VFIO_GROUP, needs to check it. So the
code is as below. I can use vfio_device_is_noiommu() in cdev path.
# if IS_ENABLED(CONFIG_VFIO_GROUP)
static inline bool vfio_device_is_noiommu(struct vfio_device *vdev)
{
return IS_ENABLED(CONFIG_VFIO_NOIOMMU) &&
vdev->group->type == VFIO_NO_IOMMU;
}
#else
static inline bool vfio_device_is_noiommu(struct vfio_device *vdev)
{
struct iommu_group *iommu_group;
if (!IS_ENABLED(CONFIG_VFIO_NOIOMMU) || !vfio_noiommu)
return -EINVAL;
iommu_group = iommu_group_get(vdev->dev);
if (iommu_group)
iommu_group_put(iommu_group);
return !iommu_group;
}
#endif
