Re: [kvm-unit-tests PATCH v6 2/2] s390x: topology: Checking Configuration Topology Information

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





On 2/8/23 12:53, Thomas Huth wrote:
On 02/02/2023 10.28, Pierre Morel wrote:
STSI with function code 15 is used to store the CPU configuration
topology.

We retrieve the maximum nested level with SCLP and use the
topology tree provided by the drawers, books, sockets, cores
arguments.

We check :
- if the topology stored is coherent between the QEMU -smp
   parameters and kernel parameters.
- the number of CPUs
- the maximum number of CPUs
- the number of containers of each levels for every STSI(15.1.x)
   instruction allowed by the machine.

Signed-off-by: Pierre Morel <pmorel@xxxxxxxxxxxxx>
---
...
+static inline int cpus_in_tle_mask(uint64_t val)
+{
+    int i, n;
+
+    for (i = 0, n = 0; i < 64; i++, val >>= 1)
+        if (val & 0x01)
+            n++;
+    return n;

I'd suggest to use __builtin_popcountl here instead of looping.

OK


+}
+
  #endif  /* _S390X_STSI_H_ */
diff --git a/s390x/topology.c b/s390x/topology.c
index 20f7ba2..f21c653 100644
--- a/s390x/topology.c
+++ b/s390x/topology.c
@@ -16,6 +16,18 @@
  #include <smp.h>
  #include <sclp.h>
  #include <s390x/hardware.h>
+#include <s390x/stsi.h>
+
+static uint8_t pagebuf[PAGE_SIZE * 2] __attribute__((aligned(PAGE_SIZE * 2)));

Isn't the SYSIB just one page only? Why reserve two pages here?

Yes it is, I change it to a single page.


+static int max_nested_lvl;
+static int number_of_cpus;
+static int max_cpus = 1;
+
+/* Topology level as defined by architecture */
+static int arch_topo_lvl[CPU_TOPOLOGY_MAX_LEVEL];
+/* Topology nested level as reported in STSI */
+static int stsi_nested_lvl[CPU_TOPOLOGY_MAX_LEVEL];
  #define PTF_REQ_HORIZONTAL    0
  #define PTF_REQ_VERTICAL    1
@@ -122,11 +134,241 @@ end:
      report_prefix_pop();
  }
+/*
+ * stsi_check_maxcpus
+ * @info: Pointer to the stsi information
+ *
+ * The product of the numbers of containers per level
+ * is the maximum number of CPU allowed by the machine.
+ */
+static void stsi_check_maxcpus(struct sysinfo_15_1_x *info)
+{
+    int n, i;
+
+    report_prefix_push("maximum cpus");
+
+    for (i = 0, n = 1; i < CPU_TOPOLOGY_MAX_LEVEL; i++) {
+        report_info("Mag%d: %d", CPU_TOPOLOGY_MAX_LEVEL - i, info->mag[i]);
+        n *= info->mag[i] ? info->mag[i] : 1;

You could use the Elvis operator here instead.

Right thanks.



+    }
+    report(n == max_cpus, "Maximum CPUs %d expected %d", n, max_cpus);
+
+    report_prefix_pop();
+}
+
+/*
+ * stsi_check_tle_coherency
+ * @info: Pointer to the stsi information
+ * @sel2: Topology level to check.
+ *
+ * We verify that we get the expected number of Topology List Entry
+ * containers for a specific level.
+ */
+static void stsi_check_tle_coherency(struct sysinfo_15_1_x *info, int sel2)
+{
+    struct topology_container *tc, *end;
+    struct topology_core *cpus;
+    int n = 0;
+    int i;
+
+    report_prefix_push("TLE coherency");
+
+    tc = &info->tle[0].container;
+    end = (struct topology_container *)((unsigned long)info + info->length);

s/unsigned long/uintptr_t/ please!

OK, thanks



+
+    for (i = 0; i < CPU_TOPOLOGY_MAX_LEVEL; i++)
+        stsi_nested_lvl[i] = 0;

memset(stsi_nested_lvl, 0, sizeof(stsi_nested_lvl)) ?

better, thanks


+    while (tc < end) {
+        if (tc->nl > 5) {

Use ">= CPU_TOPOLOGY_MAX_LEVEL" instead of "> 5" ?

OK


+            report_abort("Unexpected TL Entry: tle->nl: %d", tc->nl);
+            return;
+        }
+        if (tc->nl == 0) {
+            cpus = (struct topology_core *)tc;
+            n += cpus_in_tle_mask(cpus->mask);
+            report_info("cpu type %02x  d: %d pp: %d", cpus->type, cpus->d, cpus->pp); +            report_info("origin : %04x mask %016lx", cpus->origin, cpus->mask);
+        }
+
+        stsi_nested_lvl[tc->nl]++;
+        report_info("level %d: lvl: %d id: %d cnt: %d",
+                tc->nl, tc->nl, tc->id, stsi_nested_lvl[tc->nl]);
+
+        /* trick: CPU TLEs are twice the size of containers TLE */
+        if (tc->nl == 0)
+            tc++;

IMHO it might be cleaner to have a "uint8_t *" or "void *" to the current position in the sysinfo block, and do the pointer arithmetic on that pointer instead... well, it's likely just a matter of taste.

OK


+        tc++;
+    }
+    report(n == number_of_cpus, "Number of CPUs  : %d expect %d", n, number_of_cpus);
+    /*
+     * For KVM we accept
+     * - only 1 type of CPU
+     * - only horizontal topology
+     * - only dedicated CPUs
+     * This leads to expect the number of entries of level 0 CPU
+     * Topology Level Entry (TLE) to be:
+     * 1 + (number_of_cpus - 1)  / arch_topo_lvl[0]
+     *
+     * For z/VM or LPAR this number can only be greater if different
+     * polarity, CPU types because there may be a nested level 0 CPU TLE
+     * for each of the CPU/polarity/sharing types in a level 1 container TLE.
+     */
+    n =  (number_of_cpus - 1)  / arch_topo_lvl[0];
+    report(stsi_nested_lvl[0] >=  n + 1,
+           "CPU Type TLE    : %d expect %d", stsi_nested_lvl[0], n + 1);
+
+    /* For each level found in STSI */
+    for (i = 1; i < CPU_TOPOLOGY_MAX_LEVEL; i++) {
+        /*
+         * For non QEMU/KVM hypervisor the concatenation of the levels
+         * above level 1 are architecture dependent.
+         * Skip these checks.
+         */
+        if (!host_is_kvm() && sel2 != 2)
+            continue;
+
+        /* For QEMU/KVM we expect a simple calculation */
+        if (sel2 > i) {
+            report(stsi_nested_lvl[i] ==  n + 1,
+                   "Container TLE  %d: %d expect %d", i, stsi_nested_lvl[i], n + 1);
+            n /= arch_topo_lvl[i];
+        }
+    }
+
+    report_prefix_pop();
+}
+
+/*
+ * check_sysinfo_15_1_x
+ * @info: pointer to the STSI info structure
+ * @sel2: the selector giving the topology level to check
+ *
+ * Check if the validity of the STSI instruction and then
+ * calls specific checks on the information buffer.
+ */
+static void check_sysinfo_15_1_x(struct sysinfo_15_1_x *info, int sel2)
+{
+    int ret;
+
+    report_prefix_pushf("mnested %d 15_1_%d", max_nested_lvl, sel2);
+
+    ret = stsi(pagebuf, 15, 1, sel2);
+    if (max_nested_lvl >= sel2) {
+        report(!ret, "Valid stsi instruction");
+    } else {
+        report(ret, "Invalid stsi instruction");
+        goto end;
+    }
+
+    stsi_check_maxcpus(info);
+    stsi_check_tle_coherency(info, sel2);

You could also move the two stsi_check_* calls into the first part of the if-statement, then you could get rid of the goto in the second part.

Thanks, yes.


+end:
+    report_prefix_pop();
+}
+
+static int sclp_get_mnest(void)
+{
+    ReadInfo *sccb = (void *)_sccb;
+
+    sclp_mark_busy();
+    memset(_sccb, 0, PAGE_SIZE);
+    sccb->h.length = PAGE_SIZE;
+
+    sclp_service_call(SCLP_CMDW_READ_SCP_INFO, sccb);
+    assert(sccb->h.response_code == SCLP_RC_NORMAL_READ_COMPLETION);
+
+    return sccb->stsi_parm;
+}
+
+/*
+ * test_stsi
+ *
+ * Retrieves the maximum nested topology level supported by the architecture
+ * and the number of CPUs.
+ * Calls the checking for the STSI instruction in sel2 reverse level order + * from 6 (CPU_TOPOLOGY_MAX_LEVEL) to 2 to have the most interesting level, + * the one triggering a topology-change-report-pending condition, level 2,
+ * at the end of the report.
+ *
+ */
+static void test_stsi(void)
+{
+    int sel2;
+
+    max_nested_lvl = sclp_get_mnest();
+    report_info("SCLP maximum nested level : %d", max_nested_lvl);
+
+    number_of_cpus = sclp_get_cpu_num();
+    report_info("SCLP number of CPU: %d", number_of_cpus);
+
+    /* STSI selector 2 can takes values between 2 and 6 */
+    for (sel2 = 6; sel2 >= 2; sel2--)
+        check_sysinfo_15_1_x((struct sysinfo_15_1_x *)pagebuf, sel2);
+}
+
+/*
+ * parse_topology_args
+ * @argc: number of arguments
+ * @argv: argument array
+ *
+ * This function initialize the architecture topology levels
+ * which should be the same as the one provided by the hypervisor.
+ *
+ * We use the current names found in IBM/Z literature, Linux and QEMU:
+ * cores, sockets/packages, books, drawers and nodes to facilitate the
+ * human machine interface but store the result in a machine abstract
+ * array of architecture topology levels.
+ * Note that when QEMU uses socket as a name for the topology level 1
+ * Linux uses package or physical_package.
+ */
+static void parse_topology_args(int argc, char **argv)
+{
+    int i;
+
+    report_info("%d arguments", argc);
+    for (i = 1; i < argc; i++) {
+        if (!strcmp("-cores", argv[i])) {
+            i++;
+            if (i >= argc)
+                report_abort("-cores needs a parameter");
+            arch_topo_lvl[0] = atol(argv[i]);
+            report_info("cores: %d", arch_topo_lvl[0]);
+        } else if (!strcmp("-sockets", argv[i])) {
+            i++;
+            if (i >= argc)
+                report_abort("-sockets needs a parameter");
+            arch_topo_lvl[1] = atol(argv[i]);
+            report_info("sockets: %d", arch_topo_lvl[1]);
+        } else if (!strcmp("-books", argv[i])) {
+            i++;
+            if (i >= argc)
+                report_abort("-books needs a parameter");
+            arch_topo_lvl[2] = atol(argv[i]);
+            report_info("books: %d", arch_topo_lvl[2]);
+        } else if (!strcmp("-drawers", argv[i])) {
+            i++;
+            if (i >= argc)
+                report_abort("-drawers needs a parameter");
+            arch_topo_lvl[3] = atol(argv[i]);
+            report_info("drawers: %d", arch_topo_lvl[3]);
+        }

Maybe abort on unkown parameters, to avoid that typos go unnoticed?

Yes, better.
Thanks,

Regards.
Pierre


--
Pierre Morel
IBM Lab Boeblingen



[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [Kernel Development]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Info]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Linux Media]     [Device Mapper]

  Powered by Linux