Re: [PATCH v2 1/5] iommu/s390: Make attach succeed even if the device is in error state

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 11/9/22 9:28 AM, Niklas Schnelle wrote:
> If a zPCI device is in the error state while switching IOMMU domains
> zpci_register_ioat() will fail and we would end up with the device not
> attached to any domain. In this state since zdev->dma_table == NULL
> a reset via zpci_hot_reset_device() would wrongfully re-initialize the
> device for DMA API usage using zpci_dma_init_device(). As automatic
> recovery is currently disabled while attached to an IOMMU domain this
> only affects slot resets triggered through other means but will affect
> automatic recovery once we switch to using dma-iommu.
> 
> Additionally with that switch common code expects attaching to the
> default domain to always work so zpci_register_ioat() should only fail
> if there is no chance to recover anyway, e.g. if the device has been
> unplugged.
> 
> Improve the robustness of attach by specifically looking at the status
> returned by zpci_mod_fc() to determine if the device is unavailable and
> in this case simply ignore the error. Once the device is reset
> zpci_hot_reset_device() will then correctly set the domain's DMA
> translation tables.
> 
> Signed-off-by: Niklas Schnelle <schnelle@xxxxxxxxxxxxx>

Hi Niklas,

Already gave you this on v1, doesn't look like anything changed:

Reviewed-by: Matthew Rosato <mjrosato@xxxxxxxxxxxxx>

> ---
>  arch/s390/include/asm/pci.h |  2 +-
>  arch/s390/kvm/pci.c         |  6 ++++--
>  arch/s390/pci/pci.c         | 11 ++++++-----
>  arch/s390/pci/pci_dma.c     |  3 ++-
>  drivers/iommu/s390-iommu.c  |  9 +++++++--
>  5 files changed, 20 insertions(+), 11 deletions(-)
> 
> diff --git a/arch/s390/include/asm/pci.h b/arch/s390/include/asm/pci.h
> index 15f8714ca9b7..07361e2fd8c5 100644
> --- a/arch/s390/include/asm/pci.h
> +++ b/arch/s390/include/asm/pci.h
> @@ -221,7 +221,7 @@ void zpci_device_reserved(struct zpci_dev *zdev);
>  bool zpci_is_device_configured(struct zpci_dev *zdev);
>  
>  int zpci_hot_reset_device(struct zpci_dev *zdev);
> -int zpci_register_ioat(struct zpci_dev *, u8, u64, u64, u64);
> +int zpci_register_ioat(struct zpci_dev *, u8, u64, u64, u64, u8 *);
>  int zpci_unregister_ioat(struct zpci_dev *, u8);
>  void zpci_remove_reserved_devices(void);
>  void zpci_update_fh(struct zpci_dev *zdev, u32 fh);
> diff --git a/arch/s390/kvm/pci.c b/arch/s390/kvm/pci.c
> index c50c1645c0ae..03964c0e1fdf 100644
> --- a/arch/s390/kvm/pci.c
> +++ b/arch/s390/kvm/pci.c
> @@ -434,6 +434,7 @@ static void kvm_s390_pci_dev_release(struct zpci_dev *zdev)
>  static int kvm_s390_pci_register_kvm(void *opaque, struct kvm *kvm)
>  {
>  	struct zpci_dev *zdev = opaque;
> +	u8 status;
>  	int rc;
>  
>  	if (!zdev)
> @@ -486,7 +487,7 @@ static int kvm_s390_pci_register_kvm(void *opaque, struct kvm *kvm)
>  
>  	/* Re-register the IOMMU that was already created */
>  	rc = zpci_register_ioat(zdev, 0, zdev->start_dma, zdev->end_dma,
> -				virt_to_phys(zdev->dma_table));
> +				virt_to_phys(zdev->dma_table), &status);
>  	if (rc)
>  		goto clear_gisa;
>  
> @@ -516,6 +517,7 @@ static void kvm_s390_pci_unregister_kvm(void *opaque)
>  {
>  	struct zpci_dev *zdev = opaque;
>  	struct kvm *kvm;
> +	u8 status;
>  
>  	if (!zdev)
>  		return;
> @@ -554,7 +556,7 @@ static void kvm_s390_pci_unregister_kvm(void *opaque)
>  
>  	/* Re-register the IOMMU that was already created */
>  	zpci_register_ioat(zdev, 0, zdev->start_dma, zdev->end_dma,
> -			   virt_to_phys(zdev->dma_table));
> +			   virt_to_phys(zdev->dma_table), &status);
>  
>  out:
>  	spin_lock(&kvm->arch.kzdev_list_lock);
> diff --git a/arch/s390/pci/pci.c b/arch/s390/pci/pci.c
> index 73cdc5539384..a703dcd94a68 100644
> --- a/arch/s390/pci/pci.c
> +++ b/arch/s390/pci/pci.c
> @@ -116,20 +116,20 @@ EXPORT_SYMBOL_GPL(pci_proc_domain);
>  
>  /* Modify PCI: Register I/O address translation parameters */
>  int zpci_register_ioat(struct zpci_dev *zdev, u8 dmaas,
> -		       u64 base, u64 limit, u64 iota)
> +		       u64 base, u64 limit, u64 iota, u8 *status)
>  {
>  	u64 req = ZPCI_CREATE_REQ(zdev->fh, dmaas, ZPCI_MOD_FC_REG_IOAT);
>  	struct zpci_fib fib = {0};
> -	u8 cc, status;
> +	u8 cc;
>  
>  	WARN_ON_ONCE(iota & 0x3fff);
>  	fib.pba = base;
>  	fib.pal = limit;
>  	fib.iota = iota | ZPCI_IOTA_RTTO_FLAG;
>  	fib.gd = zdev->gisa;
> -	cc = zpci_mod_fc(req, &fib, &status);
> +	cc = zpci_mod_fc(req, &fib, status);
>  	if (cc)
> -		zpci_dbg(3, "reg ioat fid:%x, cc:%d, status:%d\n", zdev->fid, cc, status);
> +		zpci_dbg(3, "reg ioat fid:%x, cc:%d, status:%d\n", zdev->fid, cc, *status);
>  	return cc;
>  }
>  EXPORT_SYMBOL_GPL(zpci_register_ioat);
> @@ -764,6 +764,7 @@ EXPORT_SYMBOL_GPL(zpci_disable_device);
>   */
>  int zpci_hot_reset_device(struct zpci_dev *zdev)
>  {
> +	u8 status;
>  	int rc;
>  
>  	zpci_dbg(3, "rst fid:%x, fh:%x\n", zdev->fid, zdev->fh);
> @@ -787,7 +788,7 @@ int zpci_hot_reset_device(struct zpci_dev *zdev)
>  
>  	if (zdev->dma_table)
>  		rc = zpci_register_ioat(zdev, 0, zdev->start_dma, zdev->end_dma,
> -					virt_to_phys(zdev->dma_table));
> +					virt_to_phys(zdev->dma_table), &status);
>  	else
>  		rc = zpci_dma_init_device(zdev);
>  	if (rc) {
> diff --git a/arch/s390/pci/pci_dma.c b/arch/s390/pci/pci_dma.c
> index 227cf0a62800..dee825ee7305 100644
> --- a/arch/s390/pci/pci_dma.c
> +++ b/arch/s390/pci/pci_dma.c
> @@ -547,6 +547,7 @@ static void s390_dma_unmap_sg(struct device *dev, struct scatterlist *sg,
>  	
>  int zpci_dma_init_device(struct zpci_dev *zdev)
>  {
> +	u8 status;
>  	int rc;
>  
>  	/*
> @@ -598,7 +599,7 @@ int zpci_dma_init_device(struct zpci_dev *zdev)
>  
>  	}
>  	if (zpci_register_ioat(zdev, 0, zdev->start_dma, zdev->end_dma,
> -			       virt_to_phys(zdev->dma_table))) {
> +			       virt_to_phys(zdev->dma_table), &status)) {
>  		rc = -EIO;
>  		goto free_bitmap;
>  	}
> diff --git a/drivers/iommu/s390-iommu.c b/drivers/iommu/s390-iommu.c
> index 7fb512bece9a..e2c886bc4376 100644
> --- a/drivers/iommu/s390-iommu.c
> +++ b/drivers/iommu/s390-iommu.c
> @@ -98,6 +98,7 @@ static int s390_iommu_attach_device(struct iommu_domain *domain,
>  	struct s390_domain *s390_domain = to_s390_domain(domain);
>  	struct zpci_dev *zdev = to_zpci_dev(dev);
>  	unsigned long flags;
> +	u8 status;
>  	int cc;
>  
>  	if (!zdev)
> @@ -113,8 +114,12 @@ static int s390_iommu_attach_device(struct iommu_domain *domain,
>  		zpci_dma_exit_device(zdev);
>  
>  	cc = zpci_register_ioat(zdev, 0, zdev->start_dma, zdev->end_dma,
> -				virt_to_phys(s390_domain->dma_table));
> -	if (cc)
> +				virt_to_phys(s390_domain->dma_table), &status);
> +	/*
> +	 * If the device is undergoing error recovery the reset code
> +	 * will re-establish the new domain.
> +	 */
> +	if (cc && status != ZPCI_PCI_ST_FUNC_NOT_AVAIL)
>  		return -EIO;
>  	zdev->dma_table = s390_domain->dma_table;
>  




[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [Kernel Development]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Info]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Linux Media]     [Device Mapper]

  Powered by Linux