Re: [PATCH v4a 00/38] timers: Use timer_shutdown*() before freeing timers

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sat, 5 Nov 2022 12:36:42 -0400
Steven Rostedt <rostedt@xxxxxxxxxxx> wrote:

> On Sat, 5 Nov 2022 08:59:36 -0700
> Linus Torvalds <torvalds@xxxxxxxxxxxxxxxxxxxx> wrote:
> 
> > On Fri, Nov 4, 2022 at 11:01 PM Steven Rostedt <rostedt@xxxxxxxxxxx> wrote:  
> > >
> > > Patch 1 fixes an issue with sunrpc/xprt where it incorrectly uses
> > > del_singleshot_timer_sync() for something that is not a oneshot timer. As this
> > > will be converted to shutdown, this needs to be fixed first.    
> > 
> > So this is the kind of thing that I would *not* want to get eartly.  
> 
> So I'll have to break up patch 5 to not update the
> del_singleshot_timer_sync() to a timer_shutdown_sync(), because that
> breaks this code.
> 
> Hmm, since that is a functional change, it probably should wait till
> the merge window. I'll move this patch and that part of patch 5 to the
> second part of the series for the merge window.
> 
> > 
> > I really would want to get just the infrastructure in to let people
> > start doing conversions.
> > 
> > And then the "mindlessly obvious patches that are done by scripting
> > and can not possibly matter".
> > 
> > The kinds that do not *need* review, because they are mechanical, and
> > that just cause pointless noise for the rest of the patches that *do*
> > want review.
> > 
> > Not this kind of thing that is so subtle that you have to explain it.
> > That's not a "scripted patch for no semantic change".
> > 
> > So leave the del_singleshot_timer_sync() cases alone, they are
> > irrelevant for the new infrastructure and for the "mindless scripted
> > conversion" patches.
> >   
> > > Patches 2-4 changes existing timer_shutdown() functions used locally in ARM and
> > > some drivers to better namespace names.    
> > 
> > Ok, these are relevant.
> >   
> > > Patch 5 implements the new timer_shutdown() and timer_shutdown_sync() functions
> > > that disable re-arming the timer after they are called.    
> > 
> > This is obviously what I'd want early so that people can start doign
> > this in their trees.  
> 
> But will need to remove the part that it changes del_singleshot_timer_sync().
> 
> 
> >   
> > > Patches 6-28 change all the locations where there's a kfree(), kfree_rcu(),
> > > kmem_cache_free() and one call_rcu() call where the RCU function frees the
> > > timer (the workqueue patch) in the same function as the del_timer{,_sync}() is
> > > called on that timer, and there's no extra exit path between the del_timer and
> > > freeing of the timer.    
> > 
> > So honestly, I was literally hoping for a "this is the coccinelle
> > script" kind of patch.  
> 
> The above actual was, but I walked through them manually too, because I
> don't trust my conccinelle skills. All but the call_rcu() one was
> caught by conccinelle. That's why I pointed out the worqueue one. I'll
> remove that from this series.
> 
> > 
> > Now there seems to be a number of patches here that are actualyl
> > really hard to see that they are "obviously correct" and I can't tell
> > if they are actually scripted or not.  
> 
> Yes they are. The script that found these were:
> 

Julia,

Perhaps you can help me here. I have the following script to find
places that call del_timer*() that need to be converted to
timer_shutdown*() if  later on in the same function the timer is being
freed.

> ----------------------8<------------------------
> @@
> identifier ptr, timer, rfield, slab;
> @@
> (
> -	del_timer(&ptr->timer);
> +	timer_shutdown(&ptr->timer);
> |
> -	del_timer_sync(&ptr->timer);
> +	timer_shutdown_sync(&ptr->timer);
> )
>     ...
> (
> 	kfree_rcu(ptr, rfield);
> |
> 	kmem_cache_free(slab, ptr);
> |
> 	kfree(ptr);
> )
> ---------------------->8------------------------  
> 

Above is the code I used. But it gets more than it should, see below.


> So any function that had a del_timer*(&obj->timer) and then that obj
> was freed with kfree(), kfree_rcu() or kmem_cache_free() was updated.
> 
> What I did manually was to make sure there was no exit of the routine
> between those two calls. I'm sure coccinelle could do that too, but I'm
> not good enough at it to add that feature.
> 
> The reason the patches don't look obvious is because the distance
> between the del_timer() and the free may be quite far. I walked through
> these patches at least 3 times manually to make sure they are all OK.
> 
> 
> > 
> > They don't *look* scripted, but I can't really tell.  I looked at the
> > patches with ten lines of context, and I didn't see the immediately
> > following kfree() even in that expanded patch context, so it's fairly
> > far away.  
> 
> Yes, some are like a 100 lines away.
> 
> > 
> > Others in the series were *definitely* not scripted, doing clearly
> > manual cleanups:
> > 
> > -    if (dch->timer.function) {
> > -        del_timer(&dch->timer);
> > -        dch->timer.function = NULL;
> > -    }
> > +    timer_shutdown(&dch->timer);
> > 
> > so no, this does *not* make me feel "ok, this is all trivial".  
> 
> Sorry, I'll remove that. It's basically open-coding the
> timer_shutdown() as the way it shuts down the timer is simply by
> setting the timer.function to NULL.
> 
> > 
> > IOW, I'd really want *just* the infrastructure and *just* the provably
> > trivial stuff. If it wasn't some scripted really obvious thing that
> > cannot possibly change anything and that wasn't then edited manually
> > for some reason, I really don't want it early.
> > 
> > IOW, any early conversions I'd take are literally about removing pure
> > mindless noise. Not about doing conversions.
> > 
> > And I wouldn't mind it as a single conversion patch that has the
> > coccinelle script as the explanation.  
> 
> I'll need to update the coccinelle script (or ask someone to give me a
> fix) that catches the case of:
> 
> 	del_timer(&obj->timer);
> 
> 	if (x)
> 		goto out;
> 
> 	kfree(obj);
> 
> out:
> 	return;
> 

The above should not be converted.

> 
> I'm sure it's a trivial change. I'll look into it some more.
> 
> I'm guessing you don't care about the case of:
> 
> 	del_timer(&obj->timer);
> 
> 	if (x)
> 		goto label;
> 
> label:
> 
> 	kfree(obj);

Although the above is fine, we probably shouldn't covert it for the rc
release.


I need a way to determine if something gets patched based on what
happens later, not before. Could you tell me how to go about that in
Coccinelle?

Thanks!

-- Steve


> 
> As that's a bit more complex if we avoid the first goto case?
> Even though the second case is obviously correct.
> 
> I believe both of these cases exist in the kernel. I manually removed
> the places that my script found for the first case.
> 
> > 
> > Really just THAT kind of "100% mindless conversion".  
> 
> I'll look at making the most obviously correct case, where del_timer
> and kfree have no goto or returns between them. We can always add the
> rest in the merge window.
> 
> -- Steve




[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [Kernel Development]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Info]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Linux Media]     [Device Mapper]

  Powered by Linux