Re: [PATCH 4/8] hugetlb: handle truncate racing with page faults

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 09/07/22 10:11, Miaohe Lin wrote:
> On 2022/9/7 7:08, Mike Kravetz wrote:
> > On 09/06/22 11:05, Mike Kravetz wrote:
> >> On 09/06/22 09:48, Mike Kravetz wrote:
> >>> On 09/06/22 15:57, Sven Schnelle wrote:
> >>>> Hi Mike,
> >>>>
> >>>> Mike Kravetz <mike.kravetz@xxxxxxxxxx> writes:
> >>>>
> >>>>> When page fault code needs to allocate and instantiate a new hugetlb
> >>>>> page (huegtlb_no_page), it checks early to determine if the fault is
> >>>>> beyond i_size.  When discovered early, it is easy to abort the fault and
> >>>>> return an error.  However, it becomes much more difficult to handle when
> >>>>> discovered later after allocating the page and consuming reservations
> >>>>> and adding to the page cache.  Backing out changes in such instances
> >>>>> becomes difficult and error prone.
> >>>>>
> >>>>> Instead of trying to catch and backout all such races, use the hugetlb
> >>>>> fault mutex to handle truncate racing with page faults.  The most
> >>>>> significant change is modification of the routine remove_inode_hugepages
> >>>>> such that it will take the fault mutex for EVERY index in the truncated
> >>>>> range (or hole in the case of hole punch).  Since remove_inode_hugepages
> >>>>> is called in the truncate path after updating i_size, we can experience
> >>>>> races as follows.
> >>>>> - truncate code updates i_size and takes fault mutex before a racing
> >>>>>   fault.  After fault code takes mutex, it will notice fault beyond
> >>>>>   i_size and abort early.
> >>>>> - fault code obtains mutex, and truncate updates i_size after early
> >>>>>   checks in fault code.  fault code will add page beyond i_size.
> >>>>>   When truncate code takes mutex for page/index, it will remove the
> >>>>>   page.
> >>>>> - truncate updates i_size, but fault code obtains mutex first.  If
> >>>>>   fault code sees updated i_size it will abort early.  If fault code
> >>>>>   does not see updated i_size, it will add page beyond i_size and
> >>>>>   truncate code will remove page when it obtains fault mutex.
> >>>>>
> >>>>> Note, for performance reasons remove_inode_hugepages will still use
> >>>>> filemap_get_folios for bulk folio lookups.  For indicies not returned in
> >>>>> the bulk lookup, it will need to lookup individual folios to check for
> >>>>> races with page fault.
> >>>>>
> >>>>> Signed-off-by: Mike Kravetz <mike.kravetz@xxxxxxxxxx>
> >>>>> ---
> >>>>>  fs/hugetlbfs/inode.c | 184 +++++++++++++++++++++++++++++++------------
> >>>>>  mm/hugetlb.c         |  41 +++++-----
> >>>>>  2 files changed, 152 insertions(+), 73 deletions(-)
> >>>>
> >>>> With linux next starting from next-20220831 i see hangs with this
> >>>> patch applied while running the glibc test suite. The patch doesn't
> >>>> revert cleanly on top, so i checked out one commit before that one and
> >>>> with that revision everything works.
> >>>>
> >>>> It looks like the malloc test suite in glibc triggers this. I cannot
> >>>> identify a single test causing it, but instead the combination of
> >>>> multiple tests. Running the test suite on a single CPU works. Given the
> >>>> subject of the patch that's likely not a surprise.
> >>>>
> >>>> This is on s390, and the warning i get from RCU is:
> >>>>
> >>>> [ 1951.906997] rcu: INFO: rcu_sched self-detected stall on CPU
> >>>> [ 1951.907009] rcu:     60-....: (6000 ticks this GP) idle=968c/1/0x4000000000000000 softirq=43971/43972 fqs=2765
> >>>> [ 1951.907018]  (t=6000 jiffies g=116125 q=1008072 ncpus=64)
> >>>> [ 1951.907024] CPU: 60 PID: 1236661 Comm: ld64.so.1 Not tainted 6.0.0-rc3-next-20220901 #340
> >>>> [ 1951.907027] Hardware name: IBM 3906 M04 704 (z/VM 7.1.0)
> >>>> [ 1951.907029] Krnl PSW : 0704e00180000000 00000000003d9042 (hugetlb_fault_mutex_hash+0x2a/0xd8)
> >>>> [ 1951.907044]            R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:3 CC:2 PM:0 RI:0 EA:3
> >>>> [ 1951.907095] Call Trace:
> >>>> [ 1951.907098]  [<00000000003d9042>] hugetlb_fault_mutex_hash+0x2a/0xd8
> >>>> [ 1951.907101] ([<00000000005845a6>] fault_lock_inode_indicies+0x8e/0x128)
> >>>> [ 1951.907107]  [<0000000000584876>] remove_inode_hugepages+0x236/0x280
> >>>> [ 1951.907109]  [<0000000000584a7c>] hugetlbfs_evict_inode+0x3c/0x60
> >>>> [ 1951.907111]  [<000000000044fe96>] evict+0xe6/0x1c0
> >>>> [ 1951.907116]  [<000000000044a608>] __dentry_kill+0x108/0x1e0
> >>>> [ 1951.907119]  [<000000000044ac64>] dentry_kill+0x6c/0x290
> >>>> [ 1951.907121]  [<000000000044afec>] dput+0x164/0x1c0
> >>>> [ 1951.907123]  [<000000000042a4d6>] __fput+0xee/0x290
> >>>> [ 1951.907127]  [<00000000001794a8>] task_work_run+0x88/0xe0
> >>>> [ 1951.907133]  [<00000000001f77a0>] exit_to_user_mode_prepare+0x1a0/0x1a8
> >>>> [ 1951.907137]  [<0000000000d0e42e>] __do_syscall+0x11e/0x200
> >>>> [ 1951.907142]  [<0000000000d1d392>] system_call+0x82/0xb0
> >>>> [ 1951.907145] Last Breaking-Event-Address:
> >>>> [ 1951.907146]  [<0000038001d839c0>] 0x38001d839c0
> >>>>
> >>>> One of the hanging test cases is usually malloc/tst-malloc-too-large-malloc-hugetlb2.
> >>>>
> >>>> Any thoughts?
> >>>
> >>> Thanks for the report, I will take a look.
> >>>
> >>> My first thought is that this fix may not be applied,
> >>> https://lore.kernel.org/linux-mm/Ywepr7C2X20ZvLdn@monkey/
> >>> However, I see that that is in next-20220831.
> >>>
> >>> Hopefully, this will recreate on x86.
> >>
> >> One additional thought ...
> >>
> >> With this patch, we will take the hugetlb fault mutex for EVERY index in the
> >> range being truncated or hole punched.  In the case of a very large file, that
> >> is no different than code today where we take the mutex when removing pages
> >> from the file.  What is different is taking the mutex for indices that are
> >> part of holes in the file.  Consider a very large file with only one page at
> >> the very large offset.  We would then take the mutex for each index in that
> >> very large hole.  Depending on the size of the hole, this could appear as a
> >> hang.
> >>
> >> For the above locking scheme to work, we need to take the mutex for indices
> >> in holes in case there would happen to be a racing page fault.  However, there
> >> are only a limited number of fault mutexes (it is a table).  So, we only really
> >> need to take at a maximum num_fault_mutexes mutexes.  We could keep track of
> >> these with a bitmap.
> >>
> >> I am not sure this is the issue you are seeing, but a test named
> >> tst-malloc-too-large-malloc-hugetlb2 may be doing this.
> >>
> >> In any case, I think this issue needs to be addressed before this series can
> >> move forward.
> > 
> > Well, even if we address the issue of taking the same mutex multiple times,
> 
> Can we change to take all the hugetlb fault mutex at the same time to ensure every possible
> future hugetlb page fault will see a truncated i_size? Then we could just drop all the hugetlb
> fault mutex before doing any heavy stuff? It seems hugetlb fault mutex could be dropped when
> new i_size is guaranteed to be visible for any future hugetlb page fault users?
> But I might miss something...

Yes, that is the general direction and would work well for truncation.  However,
the same routine remove_inode_hugepages is used for hole punch, and I am pretty
sure we want to take the fault mutex there as it can race with page faults.

> 
> > this new synchronization scheme requires a folio lookup for EVERY index in
> > the truncated or hole punched range.  This can easily 'stall' a CPU if there
> 
> If above thought holds, we could do batch folio lookup instead. Hopes my thought will help. ;)
> 

Yes, I have some promising POC code with two batch lookups in case of holes.
Hope to send something soon.
-- 
Mike Kravetz



[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [Kernel Development]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Info]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Linux Media]     [Device Mapper]

  Powered by Linux