Re: [PATCH] KVM: s390: pci: Hook to access KVM lowlevel from VFIO

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



---8<---
> > > > > diff --git a/arch/s390/pci/Makefile b/arch/s390/pci/Makefile
> > > > > index bf557a1b789c..c02dbfb415d9 100644
> > > > > --- a/arch/s390/pci/Makefile
> > > > > +++ b/arch/s390/pci/Makefile
> > > > > @@ -7,3 +7,5 @@ obj-$(CONFIG_PCI)	+= pci.o pci_irq.o pci_dma.o pci_clp.o pci_sysfs.o \
> > > > >    			   pci_event.o pci_debug.o pci_insn.o pci_mmio.o \
> > > > >    			   pci_bus.o
> > > > >    obj-$(CONFIG_PCI_IOV)	+= pci_iov.o
> > > > > +
> > > > > +obj-y += pci_kvm_hook.o
> > > > 
> > > > I thought we wanted to compile this only for CONFIG_PCI?
> > > 
> > > Ah sorry, that is indeed what I understood with Matt but then I
> > > misunderstood your own answer from yesterday.
> > > I change to
> > > obj-$(CONFIG_PCI) += pci_kvm_hook.o
> > > 
> > > > > diff --git a/arch/s390/pci/pci_kvm_hook.c b/arch/s390/pci/pci_kvm_hook.c
> > > > > new file mode 100644
> > > > > index 000000000000..ff34baf50a3e
> > > > ---8<---
> > > > 
> > 
> > Ok with the two things above plus the comment by Matt incorporated:
> > 
> > Reviewed-by: Niklas Schnelle <schnelle@xxxxxxxxxxxxx>
> > 
> 
> Just a little correction, it changes nothing if the pci_kvm_hook.c goes 
> on same lines as other CONFIG_PCI depending files.
> So I put it on the same line.
> 
> Thanks
> 
> Pierre
> 

Of course yes. Thanks for fixing this and I'm assuming this would
either go through the KVM or vfio trees, correct?




[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [Kernel Development]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Info]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Linux Media]     [Device Mapper]

  Powered by Linux