Re: [PATCH v6 0/5] PCI: Rework pci_scan_slot() and isolated PCI functions

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Jun 28, 2022 at 04:30:55PM +0200, Niklas Schnelle wrote:
> Hi Bjorn,
> 
> In an earlier version[0], I sought to apply the existing jailhouse special case
> for isolated PCI functions to s390. As Bjorn noted in[1] there appears to be
> some potential for cleaning things up and removing duplication.
> 
> This series attempts to do this cleanup (Patches 1 through 3) followed by enabling
> isolated PCI functions for s390 (Patches 4 and 5).
> 
> Testing:
> - On s390 with SR-IOV and a ConnectX NIC with PF 1 but not PF 0 passed throug
>   i.e. the isolated function case. Also of course with just VFs and an NVMe.
> - On x86_64 on a desktop system where ARI is disabled and with an SR-IOV NIC
>   with non-contiguous VFs as well as the usual other PCI devices.
> 
> Thanks,
> Niklas
> 
> [0] https://lore.kernel.org/linux-pci/20220404095346.2324666-1-schnelle@xxxxxxxxxxxxx/
> [1] https://lore.kernel.org/linux-pci/20220408224514.GA353445@bhelgaas/
> 
> Changes v5 -> v6:
> - Added a patch (2) which separates the ARI case into its own function
> - Some whitespace changes to remove unnecesssary empty lines
> Changes v4 -> v5:
> - Remove unintended whitespace change in patch 1
> Changes v3 -> v4:
> - Use a do {} while loop in pci_scan_slot() as it is simpler (Bjorn)
> - Explicitly check "fn == 0" as it is not a pointer or bool (Bjorn)
> - Keep the "!dev" check in the ARI branch of next_fn() (Bjorn)
> - Moved the "fn == 0 && !dev" condition out of next_fn() into pci_scan_slot().
>   This allows us to keep the "!dev" case in the ARI branch and means there are
>   no new conditions in next_fn() making it easier to verify that its behavior
>   is equivalent to the existing code.
> - Guard the assignment of dev->multifunction with "fn > 0"
>   instead of "nr > 0". This matches the existing logic more closely and works
>   for the jailhouse case which unconditionally sets dev->multifunction for
>   "fn > 0". This also means fn == 0 is the single "first iteration" test.
> - Remove some unneeded whitespace in patch 2
> 
> Changes v2 -> v3:
> - Removed now unused nr_devs variable (kernel test robot)
> 
> Niklas Schnelle (5):
>   PCI: Clean up pci_scan_slot()
>   PCI: Split out next_ari_fn() from next_fn()
>   PCI: Move jailhouse's isolated function handling to pci_scan_slot()
>   PCI: Extend isolated function probing to s390
>   s390/pci: allow zPCI zbus without a function zero
> 
>  arch/s390/pci/pci_bus.c    | 82 +++++++++---------------------------
>  drivers/pci/probe.c        | 86 ++++++++++++++++++--------------------
>  include/linux/hypervisor.h |  8 ++++
>  3 files changed, 68 insertions(+), 108 deletions(-)

Applied to pci/enumeration for v5.20, thanks!



[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [Kernel Development]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Info]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Linux Media]     [Device Mapper]

  Powered by Linux