Re: [PATCH v6 3/5] PCI: Move jailhouse's isolated function handling to pci_scan_slot()

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





On 6/28/22 16:30, Niklas Schnelle wrote:
The special case of the jailhouse hypervisor passing through individual
PCI functions handles scanning for PCI functions even if function 0 does
not exist. Currently this is done with an extra loop duplicating the one
in pci_scan_slot(). By incorporating the check for jailhouse_paravirt()
into pci_scan_slot() we can instead do this as part of the normal
slot scan. Note that with the assignment of dev->multifunction gated by
fn > 0 we set dev->multifunction unconditionally for all functions if
function 0 is missing just as in the existing jailhouse loop.

The only functional change is that we now call
pcie_aspm_init_link_state() for these functions but this already
happened if function 0 was passed through and should not be a problem.

Cc: Jan Kiszka <jan.kiszka@xxxxxxxxxxx>
Link: https://lore.kernel.org/linux-pci/20220408224514.GA353445@bhelgaas/
Suggested-by: Bjorn Helgaas <bhelgaas@xxxxxxxxxx>
Signed-off-by: Niklas Schnelle <schnelle@xxxxxxxxxxxxx>
---
  drivers/pci/probe.c | 30 ++++++++++--------------------
  1 file changed, 10 insertions(+), 20 deletions(-)

diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index 2c737dce757e..a18e07e6a7df 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -2662,8 +2662,13 @@ int pci_scan_slot(struct pci_bus *bus, int devfn)
  			if (fn > 0)
  				dev->multifunction = 1;
  		} else if (fn == 0) {
-			/* function 0 is required */
-			break;
+			/*
+			 * function 0 is required unless we are running on
+			 * a hypervisor which passes through individual PCI
+			 * functions.
+			 */
+			if (!jailhouse_paravirt())
+				break;
  		}
  		fn = next_fn(bus, dev, fn);
  	} while (fn >= 0);
@@ -2862,29 +2867,14 @@ static unsigned int pci_scan_child_bus_extend(struct pci_bus *bus,
  {
  	unsigned int used_buses, normal_bridges = 0, hotplug_bridges = 0;
  	unsigned int start = bus->busn_res.start;
-	unsigned int devfn, fn, cmax, max = start;
+	unsigned int devfn, cmax, max = start;
  	struct pci_dev *dev;
-	int nr_devs;
dev_dbg(&bus->dev, "scanning bus\n"); /* Go find them, Rover! */
-	for (devfn = 0; devfn < 256; devfn += 8) {
-		nr_devs = pci_scan_slot(bus, devfn);
-
-		/*
-		 * The Jailhouse hypervisor may pass individual functions of a
-		 * multi-function device to a guest without passing function 0.
-		 * Look for them as well.
-		 */
-		if (jailhouse_paravirt() && nr_devs == 0) {
-			for (fn = 1; fn < 8; fn++) {
-				dev = pci_scan_single_device(bus, devfn + fn);
-				if (dev)
-					dev->multifunction = 1;
-			}
-		}
-	}
+	for (devfn = 0; devfn < 256; devfn += 8)
+		pci_scan_slot(bus, devfn);
/* Reserve buses for SR-IOV capability */
  	used_buses = pci_iov_bus_range(bus);



Reviewed-by: Pierre Morel <pmorel@xxxxxxxxxxxxx>

--
Pierre Morel
IBM Lab Boeblingen



[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [Kernel Development]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Info]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Linux Media]     [Device Mapper]

  Powered by Linux