[PATCH net-next 6/7] net/smc: don't req_notify until all CQEs drained

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



When we are handling softirq workload, enable hardirq may
again interrupt the current routine of softirq, and then
try to raise softirq again. This only wastes CPU cycles
and won't have any real gain.

Since IB_CQ_REPORT_MISSED_EVENTS already make sure if
ib_req_notify_cq() returns 0, it is safe to wait for the
next event, with no need to poll the CQ again in this case.

This patch disables hardirq during the processing of softirq,
and re-arm the CQ after softirq is done. Somehow like NAPI.

Co-developed-by: Guangguan Wang <guangguan.wang@xxxxxxxxxxxxxxxxx>
Signed-off-by: Guangguan Wang <guangguan.wang@xxxxxxxxxxxxxxxxx>
Signed-off-by: Dust Li <dust.li@xxxxxxxxxxxxxxxxx>
---
 net/smc/smc_wr.c | 49 +++++++++++++++++++++++++++---------------------
 1 file changed, 28 insertions(+), 21 deletions(-)

diff --git a/net/smc/smc_wr.c b/net/smc/smc_wr.c
index 24be1d03fef9..34d616406d51 100644
--- a/net/smc/smc_wr.c
+++ b/net/smc/smc_wr.c
@@ -137,25 +137,28 @@ static void smc_wr_tx_tasklet_fn(struct tasklet_struct *t)
 {
 	struct smc_ib_device *dev = from_tasklet(dev, t, send_tasklet);
 	struct ib_wc wc[SMC_WR_MAX_POLL_CQE];
-	int i = 0, rc;
-	int polled = 0;
+	int i, rc;
 
 again:
-	polled++;
 	do {
 		memset(&wc, 0, sizeof(wc));
 		rc = ib_poll_cq(dev->roce_cq_send, SMC_WR_MAX_POLL_CQE, wc);
-		if (polled == 1) {
-			ib_req_notify_cq(dev->roce_cq_send,
-					 IB_CQ_NEXT_COMP |
-					 IB_CQ_REPORT_MISSED_EVENTS);
-		}
-		if (!rc)
-			break;
 		for (i = 0; i < rc; i++)
 			smc_wr_tx_process_cqe(&wc[i]);
+		if (rc < SMC_WR_MAX_POLL_CQE)
+			/* If < SMC_WR_MAX_POLL_CQE, the CQ should have been
+			 * drained, no need to poll again. --Guangguan Wang
+			 */
+			break;
 	} while (rc > 0);
-	if (polled == 1)
+
+	/* IB_CQ_REPORT_MISSED_EVENTS make sure if ib_req_notify_cq() returns
+	 * 0, it is safe to wait for the next event.
+	 * Else we must poll the CQ again to make sure we won't miss any event
+	 */
+	if (ib_req_notify_cq(dev->roce_cq_send,
+			     IB_CQ_NEXT_COMP |
+			     IB_CQ_REPORT_MISSED_EVENTS))
 		goto again;
 }
 
@@ -478,24 +481,28 @@ static void smc_wr_rx_tasklet_fn(struct tasklet_struct *t)
 {
 	struct smc_ib_device *dev = from_tasklet(dev, t, recv_tasklet);
 	struct ib_wc wc[SMC_WR_MAX_POLL_CQE];
-	int polled = 0;
 	int rc;
 
 again:
-	polled++;
 	do {
 		memset(&wc, 0, sizeof(wc));
 		rc = ib_poll_cq(dev->roce_cq_recv, SMC_WR_MAX_POLL_CQE, wc);
-		if (polled == 1) {
-			ib_req_notify_cq(dev->roce_cq_recv,
-					 IB_CQ_SOLICITED_MASK
-					 | IB_CQ_REPORT_MISSED_EVENTS);
-		}
-		if (!rc)
+		if (rc > 0)
+			smc_wr_rx_process_cqes(&wc[0], rc);
+		if (rc < SMC_WR_MAX_POLL_CQE)
+			/* If < SMC_WR_MAX_POLL_CQE, the CQ should have been
+			 * drained, no need to poll again. --Guangguan Wang
+			 */
 			break;
-		smc_wr_rx_process_cqes(&wc[0], rc);
 	} while (rc > 0);
-	if (polled == 1)
+
+	/* IB_CQ_REPORT_MISSED_EVENTS make sure if ib_req_notify_cq() returns
+	 * 0, it is safe to wait for the next event.
+	 * Else we must poll the CQ again to make sure we won't miss any event
+	 */
+	if (ib_req_notify_cq(dev->roce_cq_recv,
+			     IB_CQ_SOLICITED_MASK |
+			     IB_CQ_REPORT_MISSED_EVENTS))
 		goto again;
 }
 
-- 
2.19.1.3.ge56e4f7




[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [Kernel Development]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Info]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Linux Media]     [Device Mapper]

  Powered by Linux