Re: [PATCH v18 00/17] s390/vfio-ap: dynamic configuration support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



PING!! Any takers?

On 2/14/22 19:50, Tony Krowiak wrote:
The current design for AP pass-through does not support making dynamic
changes to the AP matrix of a running guest resulting in a few
deficiencies this patch series is intended to mitigate:

1. Adapters, domains and control domains can not be added to or removed
     from a running guest. In order to modify a guest's AP configuration,
     the guest must be terminated; only then can AP resources be assigned
     to or unassigned from the guest's matrix mdev. The new AP
     configuration becomes available to the guest when it is subsequently
     restarted.

2. The AP bus's /sys/bus/ap/apmask and /sys/bus/ap/aqmask interfaces can
     be modified by a root user without any restrictions. A change to
     either mask can result in AP queue devices being unbound from the
     vfio_ap device driver and bound to a zcrypt device driver even if a
     guest is using the queues, thus giving the host access to the guest's
     private crypto data and vice versa.

3. The APQNs derived from the Cartesian product of the APIDs of the
     adapters and APQIs of the domains assigned to a matrix mdev must
     reference an AP queue device bound to the vfio_ap device driver. The
     AP architecture allows assignment of AP resources that are not
     available to the system, so this artificial restriction is not
     compliant with the architecture.

4. The AP configuration profile can be dynamically changed for the linux
     host after a KVM guest is started. For example, a new domain can be
     dynamically added to the configuration profile via the SE or an HMC
     connected to a DPM enabled lpar. Likewise, AP adapters can be
     dynamically configured (online state) and deconfigured (standby state)
     using the SE, an SCLP command or an HMC connected to a DPM enabled
     lpar. This can result in inadvertent sharing of AP queues between the
     guest and host.

5. A root user can manually unbind an AP queue device representing a
     queue in use by a KVM guest via the vfio_ap device driver's sysfs
     unbind attribute. In this case, the guest will be using a queue that
     is not bound to the driver which violates the device model.

This patch series introduces the following changes to the current design
to alleviate the shortcomings described above as well as to implement
more of the AP architecture:

1. A root user will be prevented from making edits to the AP bus's
     /sys/bus/ap/apmask or /sys/bus/ap/aqmask if the change would transfer
     ownership of an APQN from the vfio_ap device driver to a zcrypt driver
     while the APQN is assigned to a matrix mdev.

2. Allow a root user to hot plug/unplug AP adapters, domains and control
     domains for a KVM guest using the matrix mdev via its sysfs
     assign/unassign attributes.

4. Allow assignment of an AP adapter or domain to a matrix mdev even if
     it results in assignment of an APQN that does not reference an AP
     queue device bound to the vfio_ap device driver, as long as the APQN
     is not reserved for use by the default zcrypt drivers (also known as
     over-provisioning of AP resources). Allowing over-provisioning of AP
     resources better models the architecture which does not preclude
     assigning AP resources that are not yet available in the system. Such
     APQNs, however, will not be assigned to the guest using the matrix
     mdev; only APQNs referencing AP queue devices bound to the vfio_ap
     device driver will actually get assigned to the guest.

5. Handle dynamic changes to the AP device model.

1. Rationale for changes to AP bus's apmask/aqmask interfaces:
----------------------------------------------------------
Due to the extremely sensitive nature of cryptographic data, it is
imperative that great care be taken to ensure that such data is secured.
Allowing a root user, either inadvertently or maliciously, to configure
these masks such that a queue is shared between the host and a guest is
not only avoidable, it is advisable. It was suggested that this scenario
is better handled in user space with management software, but that does
not preclude a malicious administrator from using the sysfs interfaces
to gain access to a guest's crypto data. It was also suggested that this
scenario could be avoided by taking access to the adapter away from the
guest and zeroing out the queues prior to the vfio_ap driver releasing the
device; however, stealing an adapter in use from a guest as a by-product
of an operation is bad and will likely cause problems for the guest
unnecessarily. It was decided that the most effective solution with the
least number of negative side effects is to prevent the situation at the
source.

2. Rationale for hot plug/unplug using matrix mdev sysfs interfaces:
----------------------------------------------------------------
Allowing a user to hot plug/unplug AP resources using the matrix mdev
sysfs interfaces circumvents the need to terminate the guest in order to
modify its AP configuration. Allowing dynamic configuration makes
reconfiguring a guest's AP matrix much less disruptive.

3. Rationale for allowing over-provisioning of AP resources:
-----------------------------------------------------------
Allowing assignment of AP resources to a matrix mdev and ultimately to a
guest better models the AP architecture. The architecture does not
preclude assignment of unavailable AP resources. If a queue subsequently
becomes available while a guest using the matrix mdev to which its APQN
is assigned, the guest will be given access to it. If an APQN
is dynamically unassigned from the underlying host system, it will
automatically become unavailable to the guest.

Change log v17-v18:
------------------
* Added a new document, Documentation/s390/vfio-ap-locking.rst to describe
   the locking design for this series. This included a patch for adding the
   new doc to the MAITAINERS file for the VFIO AP maintainers.
* Added Reviewed-by for Halil in patch 6

* Restore filtering in the queue remove callback. (Halil)

* Added patch s390/vfio-ap: hot unplug of AP devices when mdev removed to
   unplug all AP devices from the guest when the mdev is removed.

* Split patch 9 (s390/vfio-ap: allow hot plug/unplug of AP resources using
   mdev device) into xx patches:
   - allow hot plug/unplug of AP devices when assigned/unassigned

* Replaced v17 patch 08/15, s390/vfio-ap: keep track of active guests with
   s390/vfio-ap: introduce new mutex to control access to the KVM pointer.
   No longer tracking guests with a list of struct ap_guest objects. Added a
   global mutex called kvm_lock which must be held whenever the kvm->lock is
   taken. (Halil)

* Changed signature of the filtering function to limit the APQNs
   examined. This change resulted in a cascade of changes to patches 5, 8
   and 12. (Halil)

* Removed v17 patch 01/15 (s390/vfio-ap: Set pqap hook when vfio_ap module
   is loaded). (Halil, Jason).

* Split patch 14 (notify drivers on config changed and scan complete
   callbacks) into two patches: One to make the AP bus changes and the other
   to implement the callbacks in the vfio_ap device driver. This was done
   to facilitate merging the AP bus changes separately from the vfio_ap
   driver changes. (Harald)

* Removed check of driver flags in the __verify_card_reservations and
   __verify_queue_reservations functions in ap_bus.c to balance the
   weighting between the default and vfio_ap drivers. (Harald)


Tony Krowiak (17):
   s390/ap: driver callback to indicate resource in use
   s390/ap: notify drivers on config changed and scan complete callbacks
   s390/vfio-ap: use new AP bus interface to search for queue devices
   s390/vfio-ap: move probe and remove callbacks to vfio_ap_ops.c
   s390/vfio-ap: manage link between queue struct and matrix mdev
   s390/vfio-ap: introduce shadow APCB
   s390/vfio-ap: refresh guest's APCB by filtering APQNs assigned to mdev
   s390/vfio-ap: allow assignment of unavailable AP queues to mdev device
   s390/vfio-ap: introduce new mutex to control access to the KVM pointer
   s390/vfio-ap: allow hot plug/unplug of AP devices when
     assigned/unassigned
   s390/vfio-ap: hot plug/unplug of AP devices when probed/removed
   s390/vfio-ap: reset queues after adapter/domain unassignment
   s390/vfio-ap: implement in-use callback for vfio_ap driver
   s390/vfio-ap: sysfs attribute to display the guest's matrix
   s390/vfio-ap: handle config changed and scan complete notification
   s390/vfio-ap: update docs to include dynamic config support
   s390/Docs: new doc describing lock usage by the vfio_ap device driver
   MAINTAINERS: pick up all vfio_ap docs for VFIO AP maintainers

  Documentation/s390/vfio-ap-locking.rst |  389 +++++++
  Documentation/s390/vfio-ap.rst         |  492 ++++++---
  MAINTAINERS                            |    2 +-
  drivers/s390/crypto/ap_bus.c           |  226 +++-
  drivers/s390/crypto/ap_bus.h           |   16 +
  drivers/s390/crypto/vfio_ap_drv.c      |   71 +-
  drivers/s390/crypto/vfio_ap_ops.c      | 1347 ++++++++++++++++++------
  drivers/s390/crypto/vfio_ap_private.h  |   57 +-
  8 files changed, 2058 insertions(+), 542 deletions(-)
  create mode 100644 Documentation/s390/vfio-ap-locking.rst





[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [Kernel Development]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Info]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Linux Media]     [Device Mapper]

  Powered by Linux