Re: [RFC 02/32] Kconfig: introduce HAS_IOPORT option and select it as necessary

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Arnd,

Am 29.12.2021 um 16:41 schrieb Arnd Bergmann:
On Tue, Dec 28, 2021 at 8:20 PM Michael Schmitz <schmitzmic@xxxxxxxxx> wrote:
Am 28.12.2021 um 23:08 schrieb Geert Uytterhoeven:
On Mon, Dec 27, 2021 at 5:44 PM Niklas Schnelle <schnelle@xxxxxxxxxxxxx> wrote:
We introduce a new HAS_IOPORT Kconfig option to gate support for
I/O port access. In a future patch HAS_IOPORT=n will disable compilation
of the I/O accessor functions inb()/outb() and friends on architectures
which can not meaningfully support legacy I/O spaces. On these platforms
inb()/outb() etc are currently just stubs in asm-generic/io.h which when
called will cause a NULL pointer access which some compilers actually
detect and warn about.

The dependencies on HAS_IOPORT in drivers as well as ifdefs for
HAS_IOPORT specific sections will be added in subsequent patches on
a per subsystem basis. Then a final patch will ifdef the I/O access
functions on HAS_IOPORT thus turning any use not gated by HAS_IOPORT
into a compile-time warning.

Link: https://lore.kernel.org/lkml/CAHk-=wg80je=K7madF4e7WrRNp37e3qh6y10Svhdc7O8SZ_-8g@xxxxxxxxxxxxxx/
Co-developed-by: Arnd Bergmann <arnd@xxxxxxxxxx>
Signed-off-by: Arnd Bergmann <arnd@xxxxxxxxxx>
Signed-off-by: Niklas Schnelle <schnelle@xxxxxxxxxxxxx>

Thanks for your patch!

--- a/arch/m68k/Kconfig
+++ b/arch/m68k/Kconfig
@@ -16,6 +16,7 @@ config M68K
        select GENERIC_CPU_DEVICES
        select GENERIC_IOMAP
        select GENERIC_IRQ_SHOW
+       select HAS_IOPORT
        select HAVE_AOUT if MMU
        select HAVE_ASM_MODVERSIONS
        select HAVE_DEBUG_BUGVERBOSE

This looks way too broad to me: most m68k platform do not have I/O
port access support.

My gut feeling says:

    select HAS_IOPORT if PCI || ISA

but that might miss some intricate details...

In particular, this misses the Atari ROM port ISA adapter case -

        select HAS_IOPORT if PCI || ISA || ATARI_ROM_ISA

might do instead.

Right, makes sense. I had suggested to go the easy way and assume that
each architecture would select HAS_IOPORT if any configuration supports
it, but it looks like for m68k there is a clearly defined set of platforms that
do.

Note that for the platforms that don't set any of the three symbols, the
fallback makes inb() an alias for readb() with a different argument type,
so there may be m68k specific drivers that rely on this, but those would
already be broken if ATARI_ROM_ISA is set.

I'd hope not - we spent some effort to make sure setting ATARI_ROM_ISA does not affect other m68k platforms when e.g. building multiplatform kernels.

Replacing inb() by readb() without any address translation won't do much good for m68k though - addresses in the traditional ISA I/O port range would hit the (unmapped) zero page.

Cheers,

	Michael


          Arnd




[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [Kernel Development]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Info]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Linux Media]     [Device Mapper]

  Powered by Linux