Re: [RFC PATCH v1 1/6] KVM: s390: Simplify SIGP Set Arch handling

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 08/10/2021 22.31, Eric Farman wrote:
The Principles of Operations describe the various reasons that
each individual SIGP orders might be rejected, and the status
bit that are set for each condition.

For example, for the Set Architecture order, it states:

   "If it is not true that all other CPUs in the configu-
    ration are in the stopped or check-stop state, ...
    bit 54 (incorrect state) ... is set to one."

However, it also states:

   "... if the CZAM facility is installed, ...
    bit 55 (invalid parameter) ... is set to one."

Since the Configuration-z/Architecture-Architectural Mode (CZAM)
facility is unconditionally presented, there is no need to examine
each VCPU to determine if it is started/stopped. It can simply be
rejected outright with the Invalid Parameter bit.

Fixes: b697e435aeee ("KVM: s390: Support Configuration z/Architecture Mode")
Signed-off-by: Eric Farman <farman@xxxxxxxxxxxxx>
---
  arch/s390/kvm/sigp.c | 14 +-------------
  1 file changed, 1 insertion(+), 13 deletions(-)

diff --git a/arch/s390/kvm/sigp.c b/arch/s390/kvm/sigp.c
index 683036c1c92a..cf4de80bd541 100644
--- a/arch/s390/kvm/sigp.c
+++ b/arch/s390/kvm/sigp.c
@@ -151,22 +151,10 @@ static int __sigp_stop_and_store_status(struct kvm_vcpu *vcpu,
  static int __sigp_set_arch(struct kvm_vcpu *vcpu, u32 parameter,
  			   u64 *status_reg)
  {
-	unsigned int i;
-	struct kvm_vcpu *v;
-	bool all_stopped = true;
-
-	kvm_for_each_vcpu(i, v, vcpu->kvm) {
-		if (v == vcpu)
-			continue;
-		if (!is_vcpu_stopped(v))
-			all_stopped = false;
-	}
-
  	*status_reg &= 0xffffffff00000000UL;
/* Reject set arch order, with czam we're always in z/Arch mode. */
-	*status_reg |= (all_stopped ? SIGP_STATUS_INVALID_PARAMETER :
-					SIGP_STATUS_INCORRECT_STATE);
+	*status_reg |= SIGP_STATUS_INVALID_PARAMETER;
  	return SIGP_CC_STATUS_STORED;
  }

I was initially a little bit torn by this modification, since, as you already mentioned, it could theoretically be possible that a userspace (like an older version of QEMU) does not use CZAM bit yet. But then I read an older version of the PoP which does not feature CZAM yet, and it reads:

"The set-architecture order is completed as follows:
• If the code in the parameter register is not 0, 1, or
  2, or if the CPU is already in the architectural
  mode specified by the code, the order is not
  accepted. Instead, bit 55 (invalid parameter) of
  the general register designated by the R 1 field of
  the SIGNAL PROCESSOR instruction is set to
  one, and condition code 1 is set.
• If it is not true that all other CPUs in the configu-
  ration are in the stopped or check-stop state, the
  order is not accepted. Instead, bit 54 (incorrect
  state) of the general register designated by the
  R 1 field of the SIGNAL PROCESSOR instruction
  is set to one, and condition code 1 is set.
• The architectural mode of all CPUs in the config-
  uration is set as specified by the code.
  ..."

So to me this sounds like "invalid parameter" has a higher priority than "incorrect state" anyway, so we likely never
should have reported here "incorrect state"...?

Thus, I think it's the right way to go now:

Reviewed-by: Thomas Huth <thuth@xxxxxxxxxx>




[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [Kernel Development]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Info]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Linux Media]     [Device Mapper]

  Powered by Linux