On Tue, 2021-09-28 at 13:11 -0500, Bjorn Helgaas wrote:
> On Thu, Sep 16, 2021 at 11:33:36AM +0200, Niklas Schnelle wrote:
> > When the platform detects an error on a PCI function or a service action
> > has been performed it is put in the error state and an error event
> > notification is provided to the OS.
> >
> > Currently we treat all error event notifications the same and simply set
> > pdev->error_state = pci_channel_io_perm_failure requiring user
> > intervention such as use of the recover attribute to get the device
> > usable again. Despite requiring a manual step this also has the
> > disadvantage that the device is completely torn down and recreated
> > resulting in higher level devices such as a block or network device
> > being recreated. In case of a block device this also means that it may
> > need to be removed and added to a software raid even if that could
> > otherwise survive with a temporary degradation.
> >
> > This is of course not ideal more so since an error notification with PEC
> > 0x3A indicates that the platform already performed error recovery
> > successfully or that the error state was caused by a service action that
> > is now finished.
> >
> > At least in this case we can assume that the error state can be reset
> > and the function made usable again. So as not to have the disadvantage
> > of a full tear down and recreation we need to coordinate this recovery
> > with the driver. Thankfully there is already a well defined recovery
> > flow for this described in Documentation/PCI/pci-error-recovery.rst.
> >
> > The implementation of this is somewhat straight forward and simplified
> > by the fact that our recovery flow is defined per PCI function. As
> > a reset we use the newly introduced zpci_hot_reset_device() which also
> > takes the PCI function out of the error state.
> >
> > Signed-off-by: Niklas Schnelle <schnelle@xxxxxxxxxxxxx>
> > ---
> > v1 -> v2:
> > - Dropped use of pci_dev_is_added(), pdev->driver check is enough
> > - Improved some comments and messages
> >
> > arch/s390/include/asm/pci.h | 4 +-
> > arch/s390/pci/pci.c | 49 ++++++++++
> > arch/s390/pci/pci_event.c | 182 +++++++++++++++++++++++++++++++++++-
> > 3 files changed, 233 insertions(+), 2 deletions(-)
> >
> > diff --git a/arch/s390/include/asm/pci.h b/arch/s390/include/asm/pci.h
> > index 2a2ed165a270..558877aff2e5 100644
> > --- a/arch/s390/include/asm/pci.h
> > +++ b/arch/s390/include/asm/pci.h
> > @@ -294,8 +294,10 @@ void zpci_debug_exit(void);
> > void zpci_debug_init_device(struct zpci_dev *, const char *);
> > void zpci_debug_exit_device(struct zpci_dev *);
> >
> > -/* Error reporting */
> > +/* Error handling */
> > int zpci_report_error(struct pci_dev *, struct zpci_report_error_header *);
> > +int zpci_clear_error_state(struct zpci_dev *zdev);
> > +int zpci_reset_load_store_blocked(struct zpci_dev *zdev);
> >
> > #ifdef CONFIG_NUMA
> >
> > diff --git a/arch/s390/pci/pci.c b/arch/s390/pci/pci.c
> > index dce60f16e94a..b987c9d76510 100644
> > --- a/arch/s390/pci/pci.c
> > +++ b/arch/s390/pci/pci.c
> > @@ -954,6 +954,55 @@ int zpci_report_error(struct pci_dev *pdev,
> > }
> > EXPORT_SYMBOL(zpci_report_error);
> >
> > +/**
> > + * zpci_clear_error_state() - Clears the zPCI error state of the device
> > + * @zdev: The zdev for which the zPCI error state should be reset
> > + *
> > + * Clear the zPCI error state of the device. If clearing the zPCI error state
> > + * fails the device is left in the error state. In this case it may make sense
> > + * to call zpci_io_perm_failure() on the associated pdev if it exists.
> > + *
> > + * Returns: 0 on success, -EIO otherwise
> > + */
> > +int zpci_clear_error_state(struct zpci_dev *zdev)
> > +{
> > + u64 req = ZPCI_CREATE_REQ(zdev->fh, 0, ZPCI_MOD_FC_RESET_ERROR);
> > + struct zpci_fib fib = {0};
> > + u8 status;
> > + int rc;
> > +
> > + rc = zpci_mod_fc(req, &fib, &status);
> > + if (rc)
> > + return -EIO;
> > +
> > + return 0;
> > +}
> > +
> > +/**
> > + * zpci_reset_load_store_blocked() - Re-enables L/S from error state
> > + * @zdev: The zdev for which to unblock load/store access
> > + *
> > + * R-eenables load/store access for a PCI function in the error state while
> > + * keeping DMA blocked. In this state drivers can poke MMIO space to determine
> > + * if error recovery is possible while catching any rogue DMA access from the
> > + * device.
> > + *
> > + * Returns: 0 on success, -EIO otherwise
> > + */
> > +int zpci_reset_load_store_blocked(struct zpci_dev *zdev)
> > +{
> > + u64 req = ZPCI_CREATE_REQ(zdev->fh, 0, ZPCI_MOD_FC_RESET_BLOCK);
> > + struct zpci_fib fib = {0};
> > + u8 status;
> > + int rc;
> > +
> > + rc = zpci_mod_fc(req, &fib, &status);
> > + if (rc)
> > + return -EIO;
> > +
> > + return 0;
> > +}
> > +
> > static int zpci_mem_init(void)
> > {
> > BUILD_BUG_ON(!is_power_of_2(__alignof__(struct zpci_fmb)) ||
> > diff --git a/arch/s390/pci/pci_event.c b/arch/s390/pci/pci_event.c
> > index e868d996ec5b..73389e161872 100644
> > --- a/arch/s390/pci/pci_event.c
> > +++ b/arch/s390/pci/pci_event.c
> > @@ -47,15 +47,182 @@ struct zpci_ccdf_avail {
> > u16 pec; /* PCI event code */
> > } __packed;
> >
> > +static inline bool ers_result_indicates_abort(pci_ers_result_t ers_res)
> > +{
> > + switch (ers_res) {
> > + case PCI_ERS_RESULT_CAN_RECOVER:
> > + case PCI_ERS_RESULT_RECOVERED:
> > + case PCI_ERS_RESULT_NEED_RESET:
> > + return false;
> > + default:
> > + return true;
> > + }
> > +}
> > +
> > +static pci_ers_result_t zpci_event_notify_error_detected(struct pci_dev *pdev)
> > +{
> > + pci_ers_result_t ers_res = PCI_ERS_RESULT_DISCONNECT;
> > + struct pci_driver *driver = pdev->driver;
> > +
> > + pr_debug("%s: asking driver to determine recoverability\n", pci_name(pdev));
> > + ers_res = driver->err_handler->error_detected(pdev, pdev->error_state);
> > + if (ers_result_indicates_abort(ers_res))
> > + pr_info("%s: driver can't recover\n", pci_name(pdev));
> > + else if (ers_res == PCI_ERS_RESULT_NEED_RESET)
> > + pr_debug("%s: driver needs reset to recover\n", pci_name(pdev));
>
> Are you following a convention of using pr_info(), etc here? I try to
> use the pci_info() family (wrappers around dev_info()) whenever I can.
A convention in the sense that so far all code under arch/s390/pci/
uses pr_info() which comes out as "zpci: ..". It seems that similar
pr_info() constructs are also common in other arch/s390/ and
drivers/s390 code.
On the other hand we already agreed that some of the s390 specific PCI
code is more like a PCI controller. So I'm open to suggestions.
