On Mon, 2021-09-06 at 21:05 -0500, Linas Vepstas wrote: > On Mon, Sep 6, 2021 at 4:49 AM Niklas Schnelle <schnelle@xxxxxxxxxxxxx> > wrote: > > > I believe we might be the first > > implementation of PCI device recovery in a virtualized setting requiring > > us to > > coordinate the device reset with the hypervisor platform by issuing a > > disable > > and re-enable to the platform as well as starting the recovery following > > a platform event. > > > > I recall none of the details, but SRIOV is a standardized system for > sharing a PCI device across multiple virtual machines. It has detailed info > on what the hypervisor must do, and what the local OS instance must do to > accomplish this. Yes and in fact on s390 we make heavy use of SR-IOV. > It's part of the PCI standard, and its more than a decade > old now, maybe two. Being a part of the PCI standard, it was interoperable > with error recovery, to the best of my recollection. Maybe I worded things with a bit too much sensationalism and it might even be that POWER supports error recovery also with virtualization, though I'm not sure how far that goes. I believe you are right in that SR-IOV supports the error recovery, after all this patch set also has to work together with SRIOV enabled devices. At least on s390 though until this patch set the error recovery performed by the hypervisor stopped in the hypervisor. The missing part added by this patch set is coordinating with device drivers in Linux to determine where use of a recovered device can pick up after the PCIe level error recovery is done. As for virtualization this coordination of course needs to cross the hypervisor/guest boundary and at least for KVM+QEMU I know for a fact that reporting a PCI error to the guest is currently just a stub that actually completely stops the guest, so you definitely don't get smooth error recovery there yet. > At the time it was > introduced, it got pushed very aggressively. The x86 hypervisor vendors > were aiming at the heart of zseries, and were militant about it. And yet we're still here, use SR-IOV ourselves and even support Linux + KVM as a hypervisor you can use just the same on a mainframe, an x86, POWER, or ARM system. > > -- Linas >
