On Wed, 21 Jul 2021 19:16:06 +0300 Yishai Hadas <yishaih@xxxxxxxxxx> wrote: > From: Max Gurtovoy <mgurtovoy@xxxxxxxxxx> > > The new flag field is be used to allow PCI drivers to signal the core code > during driver matching and when generating the modules.alias information. > > The first use will be to define a VFIO flag that indicates the PCI driver > is a VFIO driver. > > VFIO drivers have a few special properties compared to normal PCI drivers: > - They do not automatically bind. VFIO drivers are used to swap out the > normal driver for a device and convert the PCI device to the VFIO > subsystem. > > The admin must make this choice and following the current uAPI this is > usually done by using the driver_override sysfs. > > - The modules.alias includes the IDs of the VFIO PCI drivers, prefixing > them with 'vfio_pci:' instead of the normal 'pci:'. > > This allows the userspace machinery that switches devices to VFIO to > know what kernel drivers support what devices and allows it to trigger > the proper device_override. > > As existing tools do not recognize the "vfio_pci:" mod-alias prefix this > keeps todays behavior the same. VFIO remains on the side, is never > autoloaded and can only be activated by direct admin action. > > This patch is the infrastructure to provide the information in the > modules.alias to userspace and enable the only PCI VFIO driver. Later > series introduce additional HW specific VFIO PCI drivers. I don't really understand why we're combining the above "special properties" into a single flag. For instance, why wouldn't we create a flag that just indicates a match entry is only for driver override? Or if we're only using this for full wildcard matches, we could detect that even without a flag. Then, how does the "vfio_pci:" alias extend to other drivers? Is this expected to be the only driver that would use an alias ever or would other drivers use new bits of the flag? Seems some documentation is necessary; the comment on PCI_DRIVER_OVERRIDE_DEVICE_VFIO doesn't really help, "This macro is used to create a struct pci_device_id that matches a specific device", then we proceed to use it with PCI_ANY_ID. vfio-pci has always tried (as much as possible) to be "just another PCI" driver to avoid all the nasty issues that used to exist with legacy KVM device assignment, so I cringe at seeing these vfio specific hooks in PCI-core. Thanks, Alex
