On Fri, 2 Jul 2021 17:31:20 +0100
Alexandru Elisei <alexandru.elisei@xxxxxxx> wrote:
Hi Alex,
> Modify run_tests.sh to use kvmtool instead of qemu to run tests when
> kvm-unit-tests has been configured with --target=kvmtool.
>
> Example invocation:
>
> $ ./configure --target=kvmtool
> $ make clean && make
> $ ./run_scripts.sh
>
> A custom location for the kvmtool binary can be set using the environment
> variable KVMTOOL:
>
> $ KVMTOOL=/path/to/kvmtool/binary ./run_scripts.sh
>
> Standalone test support is absent, but will be added in subsequent patches.
So I skimmed over this, and it's at least better than what I had tried
a few years back ;-)
And while there might be other ways to sort out command line
differences between the two, this fixup_kvmtool_opts() looks like a
clever solution to the problem.
The only problem with this patch is that it's rather big, I wonder if
this could be split up? For instance move any QEMU specific
functionality into separate functions first (like run_test_qemu()),
also use 'if [ "$TARGET" = "qemu" ]' in this first (or second?) patch.
Then later on just add the kvmtool specifics.
Cheers,
Andre
>
> Signed-off-by: Alexandru Elisei <alexandru.elisei@xxxxxxx>
> ---
> scripts/arch-run.bash | 48 ++++++++++++++++--
> scripts/runtime.bash | 94 ++++++++++++++++++++++++++++------
> scripts/mkstandalone.sh | 5 ++
> arm/run | 110 ++++++++++++++++++++++++----------------
> run_tests.sh | 11 +++-
> 5 files changed, 204 insertions(+), 64 deletions(-)
>
> diff --git a/scripts/arch-run.bash b/scripts/arch-run.bash
> index 8ceed53ed7f8..b916b0e79aca 100644
> --- a/scripts/arch-run.bash
> +++ b/scripts/arch-run.bash
> @@ -69,16 +69,39 @@ run_qemu ()
> return $ret
> }
>
> +run_kvmtool()
> +{
> + local stdout errors ret sig
> +
> + # kvmtool doesn't allow an initrd argument with --firmware, but configure
> + # sets CONFIG_ERRATA_FORCE in lib/config.h for the kvmtool target.
> +
> + # stdout to {stdout}, stderr to $errors and stderr
> + exec {stdout}>&1
> + errors=$("${@}" </dev/null 2> >(tee /dev/stderr) > /dev/fd/$stdout)
> + ret=$?
> + exec {stdout}>&-
> +
> + # ret=0 success, everything else is failure.
> + return $ret
> +}
> +
> run_test_status ()
> {
> - local stdout ret
> + local stdout ret exit_status
>
> exec {stdout}>&1
> - lines=$(run_qemu "$@" > >(tee /dev/fd/$stdout))
> + if [ "$TARGET" = "kvmtool" ]; then
> + lines=$(run_kvmtool "$@" > >(tee /dev/fd/$stdout))
> + exit_status=0
> + else
> + lines=$(run_qemu "$@" > >(tee /dev/fd/$stdout))
> + exit_status=1
> + fi
> ret=$?
> exec {stdout}>&-
>
> - if [ $ret -eq 1 ]; then
> + if [ $ret -eq $exit_status ]; then
> testret=$(grep '^EXIT: ' <<<"$lines" | sed 's/.*STATUS=\([0-9][0-9]*\).*/\1/')
> if [ "$testret" ]; then
> if [ $testret -eq 1 ]; then
> @@ -193,6 +216,25 @@ search_qemu_binary ()
> export PATH=$save_path
> }
>
> +search_kvmtool_binary ()
> +{
> + local lkvm kvmtool
> +
> + for lkvm in ${KVMTOOL:-lkvm vm lkvm-static}; do
> + if $lkvm --help 2>/dev/null | grep -q 'The most commonly used'; then
> + kvmtool="$lkvm"
> + break
> + fi
> + done
> +
> + if [ -z "$kvmtool" ]; then
> + echo "A kvmtool binary was not found." >&2
> + echo "You can set a custom location by using the KVMTOOL=<path> environment variable." >&2
> + return 2
> + fi
> + command -v $kvmtool
> +}
> +
> initrd_create ()
> {
> if [ "$ENVIRON_DEFAULT" = "yes" ]; then
> diff --git a/scripts/runtime.bash b/scripts/runtime.bash
> index 132389c7dd59..23b238a6ab6f 100644
> --- a/scripts/runtime.bash
> +++ b/scripts/runtime.bash
> @@ -12,14 +12,19 @@ extract_summary()
> tail -3 | grep '^SUMMARY: ' | sed 's/^SUMMARY: /(/;s/'"$cr"'\{0,1\}$/)/'
> }
>
> -# We assume that QEMU is going to work if it tried to load the kernel
> +# We assume that QEMU/kvmtool is going to work if it tried to load the kernel
> premature_failure()
> {
> local log="$(eval $(get_cmdline _NO_FILE_4Uhere_) 2>&1)"
>
> - echo "$log" | grep "_NO_FILE_4Uhere_" |
> - grep -q -e "could not \(load\|open\) kernel" -e "error loading" &&
> - return 1
> + if [ "$TARGET" = "kvmtool" ]; then
> + echo "$log" | grep "Fatal: unable to load firmware image _NO_FILE_4Uhere_" &&
> + return 1
> + else
> + echo "$log" | grep "_NO_FILE_4Uhere_" |
> + grep -q -e "could not \(load\|open\) kernel" -e "error loading" &&
> + return 1
> + fi
>
> RUNTIME_log_stderr <<< "$log"
>
> @@ -30,7 +35,14 @@ premature_failure()
> get_cmdline()
> {
> local kernel=$1
> - echo "TESTNAME=$testname TIMEOUT=$timeout ACCEL=$accel $RUNTIME_arch_run $kernel -smp $smp $opts"
> + local smp_param
> +
> + if [ "$TARGET" = "kvmtool" ]; then
> + smp_param="--cpus $smp"
> + else
> + smp_param="-smp $smp"
> + fi
> + echo "TESTNAME=$testname TIMEOUT=$timeout ACCEL=$accel $RUNTIME_arch_run $kernel $smp_param $opts"
> }
>
> skip_nodefault()
> @@ -70,6 +82,35 @@ function find_word()
> grep -Fq " $1 " <<< " $2 "
> }
>
> +fixup_kvmtool_opts()
> +{
> + local opts=$1
> + local groups=$2
> + local gic
> + local gic_version
> +
> + if find_word "pmu" $groups; then
> + opts+=" --pmu"
> + fi
> +
> + if find_word "its" $groups; then
> + gic_version=3
> + gic="gicv3-its"
> + elif [[ "$opts" =~ -machine\ *gic-version=(2|3) ]]; then
> + gic_version="${BASH_REMATCH[1]}"
> + gic="gicv$gic_version"
> + fi
> +
> + if [ -n "$gic" ]; then
> + opts=${opts/-machine gic-version=$gic_version/}
> + opts+=" --irqchip=$gic"
> + fi
> +
> + opts=${opts/-append/--params}
> +
> + echo "$opts"
> +}
> +
> function run()
> {
> local testname="$1"
> @@ -105,7 +146,12 @@ function run()
> return 2
> fi
>
> - if [ -n "$accel" ] && [ -n "$ACCEL" ] && [ "$accel" != "$ACCEL" ]; then
> + if [ "$TARGET" = "kvmtool" ]; then
> + if [ -n "$accel" ] && [ "$accel" != "kvm" ]; then
> + print_result "SKIP" $testname "" "$accel not supported by kvmtool"
> + return 2
> + fi
> + elif [ -n "$accel" ] && [ -n "$ACCEL" ] && [ "$accel" != "$ACCEL" ]; then
> print_result "SKIP" $testname "" "$accel only, but ACCEL=$ACCEL"
> return 2
> elif [ -n "$ACCEL" ]; then
> @@ -126,6 +172,10 @@ function run()
> done
> fi
>
> + if [ "$TARGET" = "kvmtool" ]; then
> + opts=$(fixup_kvmtool_opts "$opts" "$groups")
> + fi
> +
> last_line=$(premature_failure > >(tail -1)) && {
> print_result "SKIP" $testname "" "$last_line"
> return 77
> @@ -165,13 +215,25 @@ function run()
> #
> # Probe for MAX_SMP, in case it's less than the number of host cpus.
> #
> -# This probing currently only works for ARM, as x86 bails on another
> -# error first. Also, this probing isn't necessary for any ARM hosts
> -# running kernels later than v4.3, i.e. those including ef748917b52
> -# "arm/arm64: KVM: Remove 'config KVM_ARM_MAX_VCPUS'". So, at some
> -# point when maintaining the while loop gets too tiresome, we can
> -# just remove it...
> -while $RUNTIME_arch_run _NO_FILE_4Uhere_ -smp $MAX_SMP \
> - |& grep -qi 'exceeds max CPUs'; do
> - MAX_SMP=$((MAX_SMP >> 1))
> -done
> +# This probing currently only works for ARM, as x86 bails on another error
> +# first. Also, this probing isn't necessary for any ARM hosts running kernels
> +# later than v4.3, i.e. those including ef748917b52 "arm/arm64: KVM: Remove
> +# 'config KVM_ARM_MAX_VCPUS'". So, at some point when maintaining the while loop
> +# gets too tiresome, we can just remove it...
> +#
> +# We don't need this check for kvmtool, as kvmtool will automatically limit the
> +# number of VCPUs to what the host supports instead of exiting with an error.
> +# kvmtool prints a message when that happens, but it's harmless and the chance
> +# of running a kernel so old that the number of VCPUs is smaller than the number
> +# of physical CPUs is vanishingly small.
> +#
> +# For qemu this check is still needed. For qemu-system-aarch64 version 6.0.0,
> +# using TCG, the maximum number of VCPUs that mach-virt supports is 8. If a test
> +# is running on a recent x86 machine, there's a fairly good chance that more
> +# than 8 logical CPUs are available.
> +if [ "$TARGET" = "qemu" ]; then
> + while $RUNTIME_arch_run _NO_FILE_4Uhere_ -smp $MAX_SMP \
> + |& grep -qi 'exceeds max CPUs'; do
> + MAX_SMP=$((MAX_SMP >> 1))
> + done
> +fi
> diff --git a/scripts/mkstandalone.sh b/scripts/mkstandalone.sh
> index cefdec30cb33..16f461c06842 100755
> --- a/scripts/mkstandalone.sh
> +++ b/scripts/mkstandalone.sh
> @@ -95,6 +95,11 @@ function mkstandalone()
> echo Written $standalone.
> }
>
> +if [ "$TARGET" = "kvmtool" ]; then
> + echo "Standalone tests not supported with kvmtool"
> + exit 2
> +fi
> +
> if [ "$ENVIRON_DEFAULT" = "yes" ] && [ "$ERRATATXT" ] && [ ! -f "$ERRATATXT" ]; then
> echo "$ERRATATXT not found. (ERRATATXT=$ERRATATXT)" >&2
> exit 2
> diff --git a/arm/run b/arm/run
> index a390ca5ae0ba..cc5890e7fec4 100755
> --- a/arm/run
> +++ b/arm/run
> @@ -8,59 +8,81 @@ if [ -z "$STANDALONE" ]; then
> source config.mak
> source scripts/arch-run.bash
> fi
> -processor="$PROCESSOR"
>
> -ACCEL=$(get_qemu_accelerator) ||
> - exit $?
> +run_test_qemu()
> +{
> + processor="$PROCESSOR"
>
> -qemu=$(search_qemu_binary) ||
> - exit $?
> + ACCEL=$(get_qemu_accelerator) ||
> + exit $?
>
> -if ! $qemu -machine '?' 2>&1 | grep 'ARM Virtual Machine' > /dev/null; then
> - echo "$qemu doesn't support mach-virt ('-machine virt'). Exiting."
> - exit 2
> -fi
> + qemu=$(search_qemu_binary) ||
> + exit $?
>
> -M='-machine virt'
> + if ! $qemu -machine '?' 2>&1 | grep 'ARM Virtual Machine' > /dev/null; then
> + echo "$qemu doesn't support mach-virt ('-machine virt'). Exiting."
> + exit 2
> + fi
>
> -if [ "$ACCEL" = "kvm" ]; then
> - if $qemu $M,\? 2>&1 | grep gic-version > /dev/null; then
> - M+=',gic-version=host'
> - fi
> - if [ "$HOST" = "aarch64" ] || [ "$HOST" = "arm" ]; then
> - processor="host"
> - if [ "$ARCH" = "arm" ] && [ "$HOST" = "aarch64" ]; then
> - processor+=",aarch64=off"
> - fi
> - fi
> -fi
> + M='-machine virt'
>
> -if [ "$ARCH" = "arm" ]; then
> - M+=",highmem=off"
> -fi
> + if [ "$ACCEL" = "kvm" ]; then
> + if $qemu $M,\? 2>&1 | grep gic-version > /dev/null; then
> + M+=',gic-version=host'
> + fi
> + if [ "$HOST" = "aarch64" ] || [ "$HOST" = "arm" ]; then
> + processor="host"
> + if [ "$ARCH" = "arm" ] && [ "$HOST" = "aarch64" ]; then
> + processor+=",aarch64=off"
> + fi
> + fi
> + fi
>
> -if ! $qemu $M -device '?' 2>&1 | grep virtconsole > /dev/null; then
> - echo "$qemu doesn't support virtio-console for chr-testdev. Exiting."
> - exit 2
> -fi
> + if [ "$ARCH" = "arm" ]; then
> + M+=",highmem=off"
> + fi
>
> -if $qemu $M -chardev testdev,id=id -initrd . 2>&1 \
> - | grep backend > /dev/null; then
> - echo "$qemu doesn't support chr-testdev. Exiting."
> - exit 2
> -fi
> + if ! $qemu $M -device '?' 2>&1 | grep virtconsole > /dev/null; then
> + echo "$qemu doesn't support virtio-console for chr-testdev. Exiting."
> + exit 2
> + fi
>
> -chr_testdev='-device virtio-serial-device'
> -chr_testdev+=' -device virtconsole,chardev=ctd -chardev testdev,id=ctd'
> + if $qemu $M -chardev testdev,id=id -initrd . 2>&1 \
> + | grep backend > /dev/null; then
> + echo "$qemu doesn't support chr-testdev. Exiting."
> + exit 2
> + fi
>
> -pci_testdev=
> -if $qemu $M -device '?' 2>&1 | grep pci-testdev > /dev/null; then
> - pci_testdev="-device pci-testdev"
> -fi
> + chr_testdev='-device virtio-serial-device'
> + chr_testdev+=' -device virtconsole,chardev=ctd -chardev testdev,id=ctd'
> +
> + pci_testdev=
> + if $qemu $M -device '?' 2>&1 | grep pci-testdev > /dev/null; then
> + pci_testdev="-device pci-testdev"
> + fi
> +
> + M+=",accel=$ACCEL"
> + command="$qemu -nodefaults $M -cpu $processor $chr_testdev $pci_testdev"
> + command+=" -display none -serial stdio -kernel"
> + command="$(migration_cmd) $(timeout_cmd) $command"
> +
> + run_qemu $command "$@"
> +}
> +
> +run_test_kvmtool()
> +{
> + kvmtool=$(search_kvmtool_binary) ||
> + exit $?
>
> -M+=",accel=$ACCEL"
> -command="$qemu -nodefaults $M -cpu $processor $chr_testdev $pci_testdev"
> -command+=" -display none -serial stdio -kernel"
> -command="$(migration_cmd) $(timeout_cmd) $command"
> + local command="$(timeout_cmd) $kvmtool run --firmware "
> + run_test_status $command "$@"
> +}
>
> -run_qemu $command "$@"
> +case "$TARGET" in
> + "qemu")
> + run_test_qemu "$@"
> + ;;
> + "kvmtool")
> + run_test_kvmtool "$@"
> + ;;
> +esac
> diff --git a/run_tests.sh b/run_tests.sh
> index 65108e73a2c0..b010ee3ab348 100755
> --- a/run_tests.sh
> +++ b/run_tests.sh
> @@ -26,7 +26,9 @@ Usage: $0 [-h] [-v] [-a] [-g group] [-j NUM-TASKS] [-t]
> -t, --tap13 Output test results in TAP format
>
> Set the environment variable QEMU=/path/to/qemu-system-ARCH to
> -specify the appropriate qemu binary for ARCH-run.
> +specify the appropriate qemu binary for ARCH-run. For arm/arm64, kvmtool
> +is also supported and the environment variable KVMTOOL=/path/to/kvmtool
> +can be used to specify a custom location for the kvmtool binary.
>
> EOF
> }
> @@ -41,6 +43,13 @@ if [ $? -ne 4 ]; then
> exit 1
> fi
>
> +if [ "$TARGET" = "kvmtool" ]; then
> + if [ -n "$ACCEL" ] && [ "$ACCEL" != "kvm" ]; then
> + echo "kvmtool supports only the kvm accelerator"
> + exit 1
> + fi
> +fi
> +
> only_tests=""
> args=`getopt -u -o ag:htj:v -l all,group:,help,tap13,parallel:,verbose -- $*`
> [ $? -ne 0 ] && exit 2;
