Re: [PATCH v11 5/7] KVM: stats: Add documentation for binary statistics interface

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Jun 18, 2021 at 04:48:17AM +0000, Jing Zhang wrote:
> This new API provides a file descriptor for every VM and VCPU to read
> KVM statistics data in binary format.
> It is meant to provide a lightweight, flexible, scalable and efficient
> lock-free solution for user space telemetry applications to pull the
> statistics data periodically for large scale systems. The pulling
> frequency could be as high as a few times per second.
> The statistics descriptors are defined by KVM in kernel and can be
> by userspace to discover VM/VCPU statistics during the one-time setup
> stage.
> The statistics data itself could be read out by userspace telemetry
> periodically without any extra parsing or setup effort.
> There are a few existed interface protocols and definitions, but no
> one can fulfil all the requirements this interface implemented as
> below:
> 1. During high frequency periodic stats reading, there should be no
>    extra efforts except the stats data read itself.
> 2. Support stats annotation, like type (cumulative, instantaneous,
>    peak, histogram, etc) and unit (counter, time, size, cycles, etc).
> 3. The stats data reading should be free of lock/synchronization. We
>    don't care about the consistency between all the stats data. All
>    stats data can not be read out at exactly the same time. We really
>    care about the change or trend of the stats data. The lock-free
>    solution is not just for efficiency and scalability, also for the
>    stats data accuracy and usability. For example, in the situation
>    that all the stats data readings are protected by a global lock,
>    if one VCPU died somehow with that lock held, then all stats data
>    reading would be blocked, then we have no way from stats data that
>    which VCPU has died.
> 4. The stats data reading workload can be handed over to other
>    unprivileged process.
> 
> Reviewed-by: David Matlack <dmatlack@xxxxxxxxxx>
> Reviewed-by: Ricardo Koller <ricarkol@xxxxxxxxxx>
> Reviewed-by: Krish Sadhukhan <krish.sadhukhan@xxxxxxxxxx>
> Reviewed-by: Fuad Tabba <tabba@xxxxxxxxxx>
> Signed-off-by: Jing Zhang <jingzhangos@xxxxxxxxxx>
> ---
>  Documentation/virt/kvm/api.rst | 176 ++++++++++++++++++++++++++++++++-
>  1 file changed, 175 insertions(+), 1 deletion(-)
> 
> diff --git a/Documentation/virt/kvm/api.rst b/Documentation/virt/kvm/api.rst
> index e328caa35d6c..7ca1c8d190c0 100644
> --- a/Documentation/virt/kvm/api.rst
> +++ b/Documentation/virt/kvm/api.rst
> @@ -5034,7 +5034,6 @@ see KVM_XEN_VCPU_SET_ATTR above.
>  The KVM_XEN_VCPU_ATTR_TYPE_RUNSTATE_ADJUST type may not be used
>  with the KVM_XEN_VCPU_GET_ATTR ioctl.
>  
> -
>  4.131 KVM_GET_SREGS2
>  ------------------
>  
> @@ -5081,6 +5080,173 @@ Writes special registers into the vcpu.
>  See KVM_GET_SREGS2 for the data structures.
>  This ioctl (when supported) replaces the KVM_SET_SREGS.
>  
> +4.133 KVM_GET_STATS_FD
> +----------------------
> +
> +:Capability: KVM_CAP_STATS_BINARY_FD
> +:Architectures: all
> +:Type: vm ioctl, vcpu ioctl
> +:Parameters: none
> +:Returns: statistics file descriptor on success, < 0 on error
> +
> +Errors:
> +
> +  ======     ======================================================
> +  ENOMEM     if the fd could not be created due to lack of memory
> +  EMFILE     if the number of opened files exceeds the limit
> +  ======     ======================================================
> +
> +The file descriptor can be used to read VM/vCPU statistics data in binary
> +format. The file data is organized into three blocks as below:
> ++-------------+
> +|   Header    |
> ++-------------+
> +| Descriptors |
> ++-------------+
> +| Stats Data  |
> ++-------------+
> +
> +The Header block is always at the start of the file. It is only needed to be
> +read one time for the lifetime of the file descriptor.
> +It is in the form of ``struct kvm_stats_header`` as below::
> +
> +	#define KVM_STATS_ID_MAXLEN		64
> +
> +	struct kvm_stats_header {
> +		__u32 name_size;
> +		__u32 count;
> +		__u32 desc_offset;
> +		__u32 data_offset;
> +		char id[];
> +	};
> +
> +The ``id`` field is a '\0' terminated string which identifies the corresponding
> +KVM statistics. For VM statistics, it is in the form of "kvm-{kvm pid}", like
> +"kvm-12345". For VCPU statistics, it is in the form of
> +"kvm-{kvm pid}/vcpu-{vcpu id}", like "kvm-12345/vcpu-12".
> +
> +The ``name_size`` field is the size (in byte) of the statistics name string
> +(including trailing '\0') appended to the end of every statistics descriptor.
> +
> +The ``count`` field is the number of statistics.
> +
> +The ``desc_offset`` field is the offset of the Descriptors block from the start
> +of the file indicated by the file descriptor.
> +
> +The ``data_offset`` field is the offset of the Stats Data block from the start
> +of the file indicated by the file descriptor.
> +
> +The Descriptors block is only needed to be read once for the lifetime of the
> +file descriptor. It is an array of ``struct kvm_stats_desc`` as shown in
> +below code block::
> +
> +	#define KVM_STATS_TYPE_SHIFT		0
> +	#define KVM_STATS_TYPE_MASK		(0xF << KVM_STATS_TYPE_SHIFT)
> +	#define KVM_STATS_TYPE_CUMULATIVE	(0x0 << KVM_STATS_TYPE_SHIFT)
> +	#define KVM_STATS_TYPE_INSTANT		(0x1 << KVM_STATS_TYPE_SHIFT)
> +	#define KVM_STATS_TYPE_MAX		KVM_STATS_TYPE_INSTANT
> +
> +	#define KVM_STATS_UNIT_SHIFT		4
> +	#define KVM_STATS_UNIT_MASK		(0xF << KVM_STATS_UNIT_SHIFT)
> +	#define KVM_STATS_UNIT_NONE		(0x0 << KVM_STATS_UNIT_SHIFT)
> +	#define KVM_STATS_UNIT_BYTES		(0x1 << KVM_STATS_UNIT_SHIFT)
> +	#define KVM_STATS_UNIT_SECONDS		(0x2 << KVM_STATS_UNIT_SHIFT)
> +	#define KVM_STATS_UNIT_CYCLES		(0x3 << KVM_STATS_UNIT_SHIFT)
> +	#define KVM_STATS_UNIT_MAX		KVM_STATS_UNIT_CYCLES
> +
> +	#define KVM_STATS_BASE_SHIFT		8
> +	#define KVM_STATS_BASE_MASK		(0xF << KVM_STATS_BASE_SHIFT)
> +	#define KVM_STATS_BASE_POW10		(0x0 << KVM_STATS_BASE_SHIFT)
> +	#define KVM_STATS_BASE_POW2		(0x1 << KVM_STATS_BASE_SHIFT)
> +	#define KVM_STATS_BASE_MAX		KVM_STATS_BASE_POW2
> +
> +	struct kvm_stats_desc {
> +		__u32 flags;
> +		__s16 exponent;
> +		__u16 size;
> +		__u32 offset;
> +		__u32 unused;
> +		char name[];
> +	};

As I mention in another patch, this should be sucked in directly from
the .h file in kerneldoc format, so that everything stays in sync.  I
bet almost this whole file can be put into the .h file, look at how drm
and v4l2 does this in a way that you only have to write the above one
time, not try to keep it in sync in two different places.

thanks,

greg k-h



[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [Kernel Development]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Info]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Linux Media]     [Device Mapper]

  Powered by Linux