Re: [kvm-unit-tests RFC 1/2] s390x: Add guest snippet support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, 20 May 2021 09:47:29 +0000
Janosch Frank <frankja@xxxxxxxxxxxxx> wrote:

> Snippets can be used to easily write and run guest (SIE) tests.
> The snippet is linked into the test binaries and can therefore be
> accessed via a ptr.
> 
> Signed-off-by: Janosch Frank <frankja@xxxxxxxxxxxxx>
> ---
>  .gitignore                |  2 ++
>  s390x/Makefile            | 28 ++++++++++++++++++---
>  s390x/snippets/c/cstart.S | 13 ++++++++++
>  s390x/snippets/c/flat.lds | 51
> +++++++++++++++++++++++++++++++++++++++ 4 files changed, 91
> insertions(+), 3 deletions(-) create mode 100644
> s390x/snippets/c/cstart.S create mode 100644 s390x/snippets/c/flat.lds
> 
> diff --git a/.gitignore b/.gitignore
> index 784cb2dd..29d3635b 100644
> --- a/.gitignore
> +++ b/.gitignore
> @@ -22,3 +22,5 @@ cscope.*
>  /api/dirty-log
>  /api/dirty-log-perf
>  /s390x/*.bin
> +/s390x/snippets/*/*.bin
> +/s390x/snippets/*/*.gbin
> diff --git a/s390x/Makefile b/s390x/Makefile
> index 8de926ab..fe267011 100644
> --- a/s390x/Makefile
> +++ b/s390x/Makefile
> @@ -75,11 +75,33 @@ OBJDIRS += lib/s390x
>  asmlib = $(TEST_DIR)/cstart64.o $(TEST_DIR)/cpu.o
>  
>  FLATLIBS = $(libcflat)
> -%.elf: %.o $(FLATLIBS) $(SRCDIR)/s390x/flat.lds $(asmlib)
> +
> +SNIPPET_DIR = $(TEST_DIR)/snippets
> +
> +# C snippets that need to be linked
> +snippets-c =
> +
> +# ASM snippets that are directly compiled and converted to a *.gbin
> +snippets-a =
> +
> +snippets = $(snippets-a)$(snippets-c)
                          ↑↑
I'm not a Makefile expert, but, don't you need a space between the two
variable expansions?

> +snippets-o += $(patsubst %.gbin,%.o,$(snippets))
> +
> +$(snippets-a): $(snippets-o) $(FLATLIBS)
> +	$(OBJCOPY) -O binary $(patsubst %.gbin,%.o,$@) $@
> +	$(OBJCOPY) -I binary -O elf64-s390 -B "s390:64-bit" $@ $@
> +
> +$(snippets-c): $(snippets-o) $(SNIPPET_DIR)/c/cstart.o  $(FLATLIBS)
> +	$(CC) $(LDFLAGS) -o $@ -T $(SNIPPET_DIR)/c/flat.lds \
> +		$(filter %.o, $^) $(FLATLIBS)
> +	$(OBJCOPY) -O binary $@ $@
> +	$(OBJCOPY) -I binary -O elf64-s390 -B "s390:64-bit" $@ $@
> +
> +%.elf: $(snippets) %.o $(FLATLIBS) $(SRCDIR)/s390x/flat.lds $(asmlib)

I would keep the %.o as the first in the list

>  	$(CC) $(CFLAGS) -c -o $(@:.elf=.aux.o) \
>  		$(SRCDIR)/lib/auxinfo.c -DPROGNAME=\"$@\"
>  	$(CC) $(LDFLAGS) -o $@ -T $(SRCDIR)/s390x/flat.lds \
> -		$(filter %.o, $^) $(FLATLIBS) $(@:.elf=.aux.o)
> +		$(filter %.o, $^) $(FLATLIBS) $(snippets)

so all the snippets are always baked in every test?

> $(@:.elf=.aux.o) $(RM) $(@:.elf=.aux.o)
>  	@chmod a-x $@
>  
> @@ -93,7 +115,7 @@ FLATLIBS = $(libcflat)
>  	$(GENPROTIMG) --host-key-document $(HOST_KEY_DOCUMENT)
> --no-verify --image $< -o $@ 
>  arch_clean: asm_offsets_clean
> -	$(RM) $(TEST_DIR)/*.{o,elf,bin} $(TEST_DIR)/.*.d
> lib/s390x/.*.d
> +	$(RM) $(TEST_DIR)/*.{o,elf,bin}
> $(SNIPPET_DIR)/c/*.{o,elf,bin,gbin} $(SNIPPET_DIR)/.*.d
> $(TEST_DIR)/.*.d lib/s390x/.*.d generated-files = $(asm-offsets)
>  $(tests:.elf=.o) $(asmlib) $(cflatobjs): $(generated-files)
> diff --git a/s390x/snippets/c/cstart.S b/s390x/snippets/c/cstart.S
> new file mode 100644
> index 00000000..02a3338b
> --- /dev/null
> +++ b/s390x/snippets/c/cstart.S
> @@ -0,0 +1,13 @@
> +#include <asm/sigp.h>
> +
> +.section .init
> +	.globl start
> +start:
> +	/* XOR all registers with themselves to clear them fully. */
> +	.irp i, 0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
> +	xgr \i,\i
> +	.endr
> +	/* 0x3000 is the stack page for now */
> +	lghi	%r15, 0x4000
> +	brasl	%r14, main
> +	sigp    %r1, %r0, SIGP_STOP
> diff --git a/s390x/snippets/c/flat.lds b/s390x/snippets/c/flat.lds
> new file mode 100644
> index 00000000..5e707325
> --- /dev/null
> +++ b/s390x/snippets/c/flat.lds
> @@ -0,0 +1,51 @@
> +SECTIONS
> +{
> +	.lowcore : {
> +		/*
> +		 * Initial short psw for disk boot, with 31 bit
> addressing for
> +		 * non z/Arch environment compatibility and the
> instruction
> +		 * address 0x10000 (cstart64.S .init).
> +		 */
> +		. = 0;
> +		 LONG(0x00080000)
> +		 LONG(0x80004000)
> +		 /* Restart new PSW for booting via PSW restart. */
> +		 . = 0x1a0;
> +		 QUAD(0x0000000180000000)
> +		 QUAD(0x0000000000004000)
> +	}
> +	. = 0x4000;
> +	.text : {
> +		*(.init)
> +		*(.text)
> +		*(.text.*)
> +	}
> +	. = ALIGN(64K);
> +	etext = .;
> +	.opd : { *(.opd) }
> +	. = ALIGN(16);
> +	.dynamic : {
> +		dynamic_start = .;
> +		*(.dynamic)
> +	}
> +	.dynsym : {
> +		dynsym_start = .;
> +		*(.dynsym)
> +	}
> +	.rela.dyn : { *(.rela*) }
> +	. = ALIGN(16);
> +	.data : {
> +		*(.data)
> +		*(.data.rel*)
> +	}
> +	. = ALIGN(16);
> +	.rodata : { *(.rodata) *(.rodata.*) }
> +	. = ALIGN(16);
> +	__bss_start = .;
> +	.bss : { *(.bss) }
> +	__bss_end = .;
> +	. = ALIGN(64K);
> +	edata = .;
> +	. += 64K;
> +	. = ALIGN(64K);
> +}





[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [Kernel Development]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Info]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Linux Media]     [Device Mapper]

  Powered by Linux