Re: [PATCH rdma-next 00/10] Enable relaxed ordering for ULPs

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 4/5/2021 10:08 AM, Leon Romanovsky wrote:
On Mon, Apr 05, 2021 at 03:41:15PM +0200, Christoph Hellwig wrote:
On Mon, Apr 05, 2021 at 08:23:54AM +0300, Leon Romanovsky wrote:
From: Leon Romanovsky <leonro@xxxxxxxxxx>

>From Avihai,

Relaxed Ordering is a PCIe mechanism that relaxes the strict ordering
imposed on PCI transactions, and thus, can improve performance.

Until now, relaxed ordering could be set only by user space applications
for user MRs. The following patch series enables relaxed ordering for the
kernel ULPs as well. Relaxed ordering is an optional capability, and as
such, it is ignored by vendors that don't support it.

The following test results show the performance improvement achieved
with relaxed ordering. The test was performed on a NVIDIA A100 in order
to check performance of storage infrastructure over xprtrdma:

Isn't the Nvidia A100 a GPU not actually supported by Linux at all?
What does that have to do with storage protocols?

This system is in use by our storage oriented customer who performed the
test. He runs drivers/infiniband/* stack from the upstream, simply backported
to specific kernel version.

The performance boost is seen in other systems too.

We need to see more information about this test, and platform.

What correctness testing was done, and how was it verified? What
PCI bus type(s) were tested, and with what adapters? What storage
workload was generated, and were all possible RDMA exchanges by
each ULP exercised?

Also if you enable this for basically all kernel ULPs, why not have
an opt-out into strict ordering for the cases that need it (if there are
any).

The RO property is optional, it can only improve. In addition, all in-kernel ULPs
don't need strict ordering. I can be mistaken here and Jason will correct me, it
is because of two things: ULP doesn't touch data before CQE and DMA API prohibits it.

+1 on Christoph's comment.

I woud hope most well-architected ULPs will support relaxed ordering,
but storage workloads, in my experience, can find ways to cause failure
in adapters. I would not suggest making this the default behavior
without extensive testing.

Tom.



[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [Kernel Development]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Info]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Linux Media]     [Device Mapper]

  Powered by Linux