Re: [PATCH v12 12/17] s390/vfio-ap: allow hot plug/unplug of AP resources using mdev device

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, 1 Dec 2020 00:32:27 +0100
Halil Pasic <pasic@xxxxxxxxxxxxx> wrote:

> > 
> > 
> > On 11/28/20 8:52 PM, Halil Pasic wrote:  
> [..]
> > >> * Unassign adapter from mdev's matrix:
> > >>
> > >>    The domain will be hot unplugged from the KVM guest if it is
> > >>    assigned to the guest's matrix.
> > >>
> > >> * Assign a control domain:
> > >>
> > >>    The control domain will be hot plugged into the KVM guest if it is not
> > >>    assigned to the guest's APCB. The AP architecture ensures a guest will
> > >>    only get access to the control domain if it is in the host's AP
> > >>    configuration, so there is no risk in hot plugging it; however, it will
> > >>    become automatically available to the guest when it is added to the host
> > >>    configuration.
> > >>
> > >> * Unassign a control domain:
> > >>
> > >>    The control domain will be hot unplugged from the KVM guest if it is
> > >>    assigned to the guest's APCB.  
> > > This is where things start getting tricky. E.g. do we need to revise
> > > filtering after an unassign? (For example an assign_adapter X didn't
> > > change the shadow, because queue XY was missing, but now we unplug domain
> > > Y. Should the adapter X pop up? I guess it should.)  
> > 
> > I suppose that makes sense at the expense of making the code
> > more complex. It is essentially what we had in the prior version
> > which used the same filtering code for assignment as well as
> > host AP configuration changes.
> >   
> 
> Will have to think about it some more. Making the user unplug and
> replug an adapter because at some point it got filtered, but there
> is no need to filter it does not feel right. On the other hand, I'm
> afraid I'm complaining in circles. 

I did some thinking. The following statements are about the state of
affairs, when all 17 patches are applied. I'm commenting here, because
I believe this is the patch that introduces the most controversial code.

First about low level problems with the current code/design. The other is
empty handling in vfio_ap_assign_apid_to_apcb() (and
vfio_ap_assign_apqi_to_apcb()) is troublesome. The final product
allows for over-commitment, i.e. assignment of e.g. domains that
are not in the crypto host config. Let's assume the host LPAR
has usage domains 1 and 2, and adapters 1, 2, and 3. The apmask
and aqmask are both 0 (all in on vfio), all bound. We start with an empty
mdev that is tied to a running guest:
assign_adapter 1
assign_adapter 2
assign_adapter 3
assign_adapter 4
all of these will work. The resulting shadow_apcb is completely empty. No
commit_apcb.
assign_domain 1
assign_domain 2
assign_domain 3
all of these will work. But again the shadow_apcb is completely empty at
the end: we did get to the loop that is checking the boundness of the
queues, but please note that we are checking against matrix.apm, and
adapter 4 is not in the config of the host.

I've hacked up a fixup patch for these problems that simplifies the
code considerably, but there are design level issues, that run deeper,
so I'm not sure the fixups are the way to go.

Now lets talk about design level stuff. Currently the assignment
operations are designed in to accommodate the FCFS principle. This
is a blessing and a curse at the same time. 

Consider the following scenarios. We have an empty (nothing assigned
mdev) and the following queues are bound to the vfio_ap driver:
0.0
0.1
1.0
If the we do 
asssign_adapter 0
assign_domain 0
assign_domain 1
assign_adapter 1
We end up with the guest_matrix
0.0
0.1
and the matrix
0.0
0.1
1.0
1.0

That is a different result compared to
asssign_adapter 0
assign_domain 0
assign_adapter 1
assign_domain 1
or the situation where we have 0.0, 0.1, 1.0 and 1.1 bound to vfio_ap
and then 1.1 gets unbound.

For the same system state (bound, config, ap_perm, matrix) you get a
different outcomes (guest_matrix), because the outcomes depend on
history.

Another thing is recovery. I believe the main idea behind shadow_apcb
is that we should auto recover once the resources are available again.
The current design choices make recovery more difficult to think about
because we may end up having either the apid or the apqi filtered on
a 'hole' (an queue missing for reasons different than, belonging to
default, or not being in the host config).

I still think for these cases filtering out the apid is the lesser
evil. Yes a hotplug of a domain making hot unplugging an adapter is
ugly, but at least I can describe that. So I propose the following.
Let me hack up a fixup that morphs things in this direction. Maybe
I will run into unexpected problems, but if I don't then we will
have an alternative design you can run your testcases against. How about
that?

Regards,
Halil



[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [Kernel Development]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Info]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Linux Media]     [Device Mapper]

  Powered by Linux