By the time that our .get_link_ksettings() code issues a QUERY CARD INFO cmd to get link-related information, we already set up a good amount of static link data. Return this data when the cmd fails, same as when the cmd is not supported. Signed-off-by: Julian Wiedmann <jwi@xxxxxxxxxxxxx> --- drivers/s390/net/qeth_ethtool.c | 7 +------ 1 file changed, 1 insertion(+), 6 deletions(-) diff --git a/drivers/s390/net/qeth_ethtool.c b/drivers/s390/net/qeth_ethtool.c index b5caa723326e..b843df2c14b1 100644 --- a/drivers/s390/net/qeth_ethtool.c +++ b/drivers/s390/net/qeth_ethtool.c @@ -413,7 +413,6 @@ static int qeth_get_link_ksettings(struct net_device *netdev, struct qeth_card *card = netdev->ml_priv; enum qeth_link_types link_type; struct carrier_info carrier_info; - int rc; if (IS_IQD(card) || IS_VM_NIC(card)) link_type = QETH_LINK_TYPE_10GBIT_ETH; @@ -455,12 +454,8 @@ static int qeth_get_link_ksettings(struct net_device *netdev, /* Check if we can obtain more accurate information. */ /* If QUERY_CARD_INFO command is not supported or fails, */ /* just return the heuristics that was filled above. */ - rc = qeth_query_card_info(card, &carrier_info); - if (rc == -EOPNOTSUPP) /* for old hardware, return heuristic */ + if (qeth_query_card_info(card, &carrier_info)) return 0; - if (rc) /* report error from the hardware operation */ - return rc; - /* on success, fill in the information got from the hardware */ netdev_dbg(netdev, "card info: card_type=0x%02x, port_mode=0x%04x, port_speed=0x%08x\n", -- 2.17.1
