Re: [PATCH 4/4] vfio-pci/zdev: use a device region to retrieve zPCI information

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sat, 19 Sep 2020 11:28:38 -0400
Matthew Rosato <mjrosato@xxxxxxxxxxxxx> wrote:

> Define a new configuration entry VFIO_PCI_ZDEV for VFIO/PCI.
> 
> When this s390-only feature is configured we initialize a new device
> region, VFIO_REGION_SUBTYPE_IBM_ZPCI_CLP, to hold information provided
> by the underlying hardware.
> 
> This patch is based on work previously done by Pierre Morel.
> 
> Signed-off-by: Matthew Rosato <mjrosato@xxxxxxxxxxxxx>
> ---
>  drivers/vfio/pci/Kconfig            |  13 ++
>  drivers/vfio/pci/Makefile           |   1 +
>  drivers/vfio/pci/vfio_pci.c         |   8 ++
>  drivers/vfio/pci/vfio_pci_private.h |  10 ++
>  drivers/vfio/pci/vfio_pci_zdev.c    | 242 ++++++++++++++++++++++++++++++++++++

Maybe you want to add yourself to MAINTAINERS for the zdev-specific
files? You're probably better suited to review changes to the
zpci-specific code :)

>  5 files changed, 274 insertions(+)
>  create mode 100644 drivers/vfio/pci/vfio_pci_zdev.c

(...)

> +int vfio_pci_zdev_init(struct vfio_pci_device *vdev)
> +{
> +	struct vfio_region_zpci_info *region;
> +	struct zpci_dev *zdev;
> +	size_t clp_offset;
> +	int size;
> +	int ret;
> +
> +	if (!vdev->pdev->bus)
> +		return -ENODEV;
> +
> +	zdev = to_zpci(vdev->pdev);
> +	if (!zdev)
> +		return -ENODEV;
> +
> +	/* Calculate size needed for all supported CLP features  */
> +	size = sizeof(*region) +
> +	       sizeof(struct vfio_region_zpci_info_qpci) +
> +	       sizeof(struct vfio_region_zpci_info_qpcifg) +
> +	       (sizeof(struct vfio_region_zpci_info_util) + CLP_UTIL_STR_LEN) +
> +	       (sizeof(struct vfio_region_zpci_info_pfip) +
> +		CLP_PFIP_NR_SEGMENTS);
> +
> +	region = kmalloc(size, GFP_KERNEL);
> +	if (!region)
> +		return -ENOMEM;
> +
> +	/* Fill in header */
> +	region->argsz = size;
> +	clp_offset = region->offset = sizeof(struct vfio_region_zpci_info);
> +
> +	/* Fill the supported CLP features */
> +	clp_offset = vfio_pci_zdev_add_qpci(zdev, region, clp_offset);
> +	clp_offset = vfio_pci_zdev_add_qpcifg(zdev, region, clp_offset);
> +	clp_offset = vfio_pci_zdev_add_util(zdev, region, clp_offset);
> +	clp_offset = vfio_pci_zdev_add_pfip(zdev, region, clp_offset);

So, the regions are populated once. Can any of the values in the
hardware structures be modified by a guest? Or changed from the
hardware side?

> +
> +	ret = vfio_pci_register_dev_region(vdev,
> +		PCI_VENDOR_ID_IBM | VFIO_REGION_TYPE_PCI_VENDOR_TYPE,
> +		VFIO_REGION_SUBTYPE_IBM_ZPCI_CLP, &vfio_pci_zdev_regops,
> +		size, VFIO_REGION_INFO_FLAG_READ, region);
> +	if (ret)
> +		kfree(region);
> +
> +	return ret;
> +}




[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [Kernel Development]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Info]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Linux Media]     [Device Mapper]

  Powered by Linux