Re: [PATCH v10 02/16] s390/vfio-ap: use new AP bus interface to search for queue devices

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





On 8/28/20 4:13 AM, Cornelia Huck wrote:
On Thu, 27 Aug 2020 10:24:07 -0400
Tony Krowiak <akrowiak@xxxxxxxxxxxxx> wrote:

On 8/25/20 6:13 AM, Cornelia Huck wrote:
On Fri, 21 Aug 2020 15:56:02 -0400
Tony Krowiak<akrowiak@xxxxxxxxxxxxx>  wrote:
   /**
- * vfio_ap_get_queue: Retrieve a queue with a specific APQN from a list
- * @matrix_mdev: the associated mediated matrix
+ * vfio_ap_get_queue: Retrieve a queue with a specific APQN.
    * @apqn: The queue APQN
    *
- * Retrieve a queue with a specific APQN from the list of the
- * devices of the vfio_ap_drv.
- * Verify that the APID and the APQI are set in the matrix.
+ * Retrieve a queue with a specific APQN from the AP queue devices attached to
+ * the AP bus.
    *
- * Returns the pointer to the associated vfio_ap_queue
+ * Returns the pointer to the vfio_ap_queue with the specified APQN, or NULL.
    */
-static struct vfio_ap_queue *vfio_ap_get_queue(
-					struct ap_matrix_mdev *matrix_mdev,
-					int apqn)
+static struct vfio_ap_queue *vfio_ap_get_queue(unsigned long apqn)
   {
+	struct ap_queue *queue;
   	struct vfio_ap_queue *q;
-	struct device *dev;
- if (!test_bit_inv(AP_QID_CARD(apqn), matrix_mdev->matrix.apm))
-		return NULL;
-	if (!test_bit_inv(AP_QID_QUEUE(apqn), matrix_mdev->matrix.aqm))
I think you should add some explanation to the patch description why
testing the matrix bitmasks is not needed anymore.
As a result of this comment, I took a closer look at the code to
determine the reason for eliminating the matrix_mdev
parameter. The reason is because the code below (i.e., find the device
and get the driver data) was also repeated in the vfio_ap_irq_disable_apqn()
function, so I replaced it with a call to the function above; however, the
vfio_ap_irq_disable_apqn() function  does not have a reference to the
matrix_mdev, so I eliminated the matrix_mdev parameter. Note that the
vfio_ap_irq_disable_apqn() is called for each APQN assigned to a matrix
mdev, so there is no need to test the bitmasks there.

The other place from which the function above is called is
the handle_pqap() function which does have a reference to the
matrix_mdev. In order to ensure the integrity of the instruction
being intercepted - i.e., PQAP(AQIC) enable/disable IRQ for aN
AP queue - the testing of the matrix bitmasks probably ought to
be performed, so it will be done there instead of in the
vfio_ap_get_queue() function above.
Should you add a comment that vfio_ap_get_queue() assumes that the
caller makes sure that this is only called for APQNs that are assigned
to a matrix?

I suppose it wouldn't hurt.



+	queue = ap_get_qdev(apqn);
+	if (!queue)
   		return NULL;
- dev = driver_find_device(&matrix_dev->vfio_ap_drv->driver, NULL,
-				 &apqn, match_apqn);
-	if (!dev)
-		return NULL;
-	q = dev_get_drvdata(dev);
-	q->matrix_mdev = matrix_mdev;
-	put_device(dev);
+	q = dev_get_drvdata(&queue->ap_dev.device);
+	put_device(&queue->ap_dev.device);
return q;
   }
(...)




[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [Kernel Development]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Info]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Linux Media]     [Device Mapper]

  Powered by Linux