Re: [PATCH v3] PCI: Introduce flag for detached virtual functions

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 8/27/20 2:31 PM, Bjorn Helgaas wrote:
Re the subject line, this patch does a lot more than just "introduce a
flag"; AFAICT it actually enables important VFIO functionality, e.g.,
something like:

   vfio/pci: Enable MMIO access for s390 detached VFs


Fair -- maybe s/Enable/Restore/ as this functionality had been working until the mem bit enforcement was added to vfio via abafbc551fdd.

On Thu, Aug 13, 2020 at 11:40:43AM -0400, Matthew Rosato wrote:
s390x has the notion of providing VFs to the kernel in a manner
where the associated PF is inaccessible other than via firmware.
These are not treated as typical VFs and access to them is emulated
by underlying firmware which can still access the PF.  After
the referened commit however these detached VFs were no longer able
to work with vfio-pci as the firmware does not provide emulation of
the PCI_COMMAND_MEMORY bit.  In this case, let's explicitly recognize
these detached VFs so that vfio-pci can allow memory access to
them again.

Out of curiosity, in what sense is the PF inaccessible?  Is it
*impossible* for Linux to access the PF, or is it just not enumerated
by clp_list_pci() so Linux doesn't know about it?

So, it is not enumerated via clp_list_pci because it is not assigned to the host partition -- So while it is physically available to the machine and the firmware can see it, the machine is divided up into multiple logical partitions -- The partition where we are running the host kernel in this scenario has no access to the PF. Basically, think bare metal hypervisor and only the VF was passed through to the kernel guest.

VFs do not implement PCI_COMMAND, so I guess "firmware does not
provide emulation of PCI_COMMAND_MEMORY" means something like "we
can't access the PF so we can't enable/disable PCI_COMMAND_MEMORY"?


So, the root issue is that vfio-pci added enforcement of the bit via abafbc551fdd -- Then subsequently waived the requirement for VFs via bugfix ebfa440ce38b since as you say it can't be on for VFs per the PCIe spec -- Problem is, vfio can't tell these devices are VFs because is_virtfn=0 for these devices.

Fundamentally, I am trying to find a proper way to tell vfio it's OK to waive the requirement for these devices too.

s/referened/referenced/

Fixes: abafbc551fdd ("vfio-pci: Invalidate mmaps and block MMIO access on disabled memory")
Signed-off-by: Matthew Rosato <mjrosato@xxxxxxxxxxxxx>
---
  arch/s390/pci/pci_bus.c            | 13 +++++++++++++
  drivers/vfio/pci/vfio_pci_config.c |  8 ++++----
  include/linux/pci.h                |  4 ++++
  3 files changed, 21 insertions(+), 4 deletions(-)

diff --git a/arch/s390/pci/pci_bus.c b/arch/s390/pci/pci_bus.c
index 642a993..1b33076 100644
--- a/arch/s390/pci/pci_bus.c
+++ b/arch/s390/pci/pci_bus.c
@@ -184,6 +184,19 @@ static inline int zpci_bus_setup_virtfn(struct zpci_bus *zbus,
  }
  #endif
+void pcibios_bus_add_device(struct pci_dev *pdev)
+{
+	struct zpci_dev *zdev = to_zpci(pdev);
+
+	/*
+	 * If we have a VF on a non-multifunction bus, it must be a VF that is
+	 * detached from its parent PF.  We rely on firmware emulation to
+	 * provide underlying PF details.

What exactly does "multifunction bus" mean?  I'm familiar with
multi-function *devices*, but not multi-function buses.


So, this flag is effectively stating whether proper SR-IOV support is available for devices on the bus. This is an interesting point though, I don't think this will catch all instances of this scenario (vs a more-direct check for a device that has a vfn but no linked PF). I need to look at this again, thanks.

+	 */
+	if (zdev->vfn && !zdev->zbus->multifunction)
+		pdev->detached_vf = 1;
+}
+
  static int zpci_bus_add_device(struct zpci_bus *zbus, struct zpci_dev *zdev)
  {
  	struct pci_bus *bus;
diff --git a/drivers/vfio/pci/vfio_pci_config.c b/drivers/vfio/pci/vfio_pci_config.c
index d98843f..98f93d1 100644
--- a/drivers/vfio/pci/vfio_pci_config.c
+++ b/drivers/vfio/pci/vfio_pci_config.c
@@ -406,7 +406,7 @@ bool __vfio_pci_memory_enabled(struct vfio_pci_device *vdev)
  	 * PF SR-IOV capability, there's therefore no need to trigger
  	 * faults based on the virtual value.
  	 */
-	return pdev->is_virtfn || (cmd & PCI_COMMAND_MEMORY);
+	return dev_is_vf(&pdev->dev) || (cmd & PCI_COMMAND_MEMORY);

I'm not super keen on the idea of having two subtly different ways of
identifying VFs.  I think that will be confusing.  This seems to be
the critical line, so whatever we do here, it will be out of the
ordinary and probably deserves a little comment.


Another notion that Alex floated was the idea of tagging these devices that don't implement the PCI_COMMAND_MEMORY bit via a dev_flags bit rather than changing the way we identify VFs. It's grown on me and I've tried it out as an alternative. Does this sort of approach sound better?

If Linux doesn't see the PF, does pci_physfn(VF) return NULL, i.e., is
VF->physfn NULL?


pci_physfn(VF) == VF because is_virtfn=0 for these devices.





[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [Kernel Development]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Info]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Linux Media]     [Device Mapper]

  Powered by Linux