Hi All,
This new respin of the series add modifications to
- patch 9: s390x: css: ssch/tsch with sense and interrupt
Other patches did not change.
Recall:
Goal of the series is to have a framework to test Channel-Subsystem I/O with
QEMU/KVM.
To be able to support interrupt for CSS I/O and for SCLP we need to modify
the interrupt framework to allow re-entrant interruptions.
We add a registration for IRQ callbacks to the test program to define its own
interrupt handler. We need to do special work under interrupt like acknowledging
the interrupt.
This series presents three tests:
- Enumeration:
The CSS is enumerated using the STSCH instruction recursively on all
potentially existing channels.
Keeping the first channel found as a reference for future use.
Checks STSCH
- Enable:
If the enumeration succeeded the tests enables the reference
channel with MSCH and verifies with STSCH that the channel is
effectively enabled, retrying a predefined count on failure
to enable the channel
Checks MSCH
- Sense:
If the channel is enabled this test sends a SENSE_ID command
to the reference channel, analyzing the answer and expecting
the Control unit type being 0x3832, a.k.a. virtio-ccw.
Checks SSCH(READ) and IO-IRQ
Note:
- The following 5 patches are general usage and may be pulled first:
s390x: saving regs for interrupts
s390x: I/O interrupt registration
s390x: export the clock get_clock_ms() utility
s390x: clock and delays calculations
s390x: define function to wait for interrupt
- These 4 patches are really I/O oriented:
s390x: Library resources for CSS tests
s390x: css: stsch, enumeration test
s390x: css: msch, enable test
s390x: css: ssch/tsch with sense and interrupt
Regards,
Pierre
Pierre Morel (9):
s390x: saving regs for interrupts
s390x: I/O interrupt registration
s390x: export the clock get_clock_ms() utility
s390x: clock and delays calculations
s390x: define function to wait for interrupt
s390x: Library resources for CSS tests
s390x: css: stsch, enumeration test
s390x: css: msch, enable test
s390x: css: ssch/tsch with sense and interrupt
lib/s390x/asm/arch_def.h | 14 ++
lib/s390x/asm/time.h | 50 ++++++
lib/s390x/css.h | 294 +++++++++++++++++++++++++++++++++++
lib/s390x/css_dump.c | 152 ++++++++++++++++++
lib/s390x/css_lib.c | 323 +++++++++++++++++++++++++++++++++++++++
lib/s390x/interrupt.c | 23 ++-
lib/s390x/interrupt.h | 8 +
s390x/Makefile | 3 +
s390x/css.c | 150 ++++++++++++++++++
s390x/cstart64.S | 41 ++++-
s390x/intercept.c | 11 +-
s390x/unittests.cfg | 4 +
12 files changed, 1060 insertions(+), 13 deletions(-)
create mode 100644 lib/s390x/asm/time.h
create mode 100644 lib/s390x/css.h
create mode 100644 lib/s390x/css_dump.c
create mode 100644 lib/s390x/css_lib.c
create mode 100644 lib/s390x/interrupt.h
create mode 100644 s390x/css.c
--
2.25.1
from v12 to v13:
- set the correct padding for senseid
(Thomas)
from v11 to v12:
- rewording from comments
(Connie)
- fixing buggy tests in css_enable
(Connie)
- Suppress some unusefull lines and tests
(Connie)
from v10 to v11:
- p8: added ISC to css_enable()
(Connie)
- p9: rework css_residual_count()
suppress report_info, change label
(Connie)
- p9: added wait_and_check_io_completion()
(after comment from Connie to test for completion)
- p9: reworked the reports, mostly keeping the sentenses
but better use of report_prefix_...()
from v9 to v10:
- postpone and removed from series
- s390x: Use PSW bits definitions in cstart
- s390x: Move control register bit definitions and add AFP to them
reason: gcc compiler for RedHat-7 does not allow UL suffix for
macro declarations.
(Thomas)
- postpone and removed from series
-s390x-retrieve-decimal-and-hexadecimal-kernel-par.patch
reason: must be reworked and since we can do without an argument
I prefer to separate it from this series.
(Janosch, Andrew)
- several word spelling, better comments
(Connie, Thomas)
- Extensively reworked ssch/tsch with sense and interrupt
- added a dedicated ISC to the channel subsystem test
when enabling a channel
- reworked the ISC enabling in CR6
- reworked the test on residual count
- moved the IRQ handler and the start function inside the
library to share with following CSS tests.
- added more report_info to the IRQ handler
- rename some functions, start_single_ccw, css_irq_io,
css_residual_count
(Connie, Pierre)
from v8 to v9:
- rename PSW_EXCEPTION_MASK to PSW_MASK_ON_EXCEPTION
(Thomas)
- changed false max microseconds in delay calculation
(Thomas)
- fix bug in decimal parameter calculation
(Thomas)
- fix bug in msch inline assembly
(Thomas)
- add report_abort() for unprobable result of tsch
in I/O IRQ
(Thomas)
- use of existing lctlg() wrapper instead of new function
(Thomas)
from v7 to v8
* Suppress ccw-pong specific remote device
(Thomas, Janosch)
* use virtio-net-ccw as device instead of a specific
device: no more need for QEMU patch
(Connie)
* Add kernel parameter to access a different device.
(Connie)
* Add tests on subschannel reading, length, garbage.
(Connie)
* Several naming changes and reorganizations of definitions.
(Connie)
* Take wrapping into account for delay calculation
* Align CCW1 on 8 bytes boundary
* Reorganize the first three patches
(Janosch)
from v6 to v7
* s390x: saving regs for interrupts
- macro name modificatio for SAVE_REGS_STACK
(David)
- saving the FPC
(David)
* s390x: Use PSW bits definitions in cstart
- suppress definition for PSW_RESET_MASK
use PSW_EXCEPTION_MASK | PSW_MASK_SHORT_PSW
(David)
* s390x: Library resources for CSS tests
* s390x: css: stsch, enumeration test
move library definitions from stsch patche
to the Library patch
add the library to the s390 Makefile here
(Janosch)
* s390x: css: msch, enable test
Add retries when enable fails
(Connie)
Re-introduce the patches for delay implementation
to add a delay between retries
* s390x: define function to wait for interrupt
Changed name from wfi to wait_for_interrupt
(Janosch)
* s390x: css: ssch/tsch with sense and interrupt
add a flag parameter to ssch and use it to add
SLI (Suppress Length Indication) flag for SENSE_ID
(Connie)
from v5 to v6
- Added comments for IRQ handling in
s390x: saving regs for interrupts
(Janosch)
- fixed BUG on reset_psw, added PSW_MASK_PSW_SHORT
and PSW_RESET_MASK
- fixed several lines over 80 chars
- fixed licenses, use GPL V2 (no more LGPL)
- replacing delay() with wfi() (Wait For Interrupt)
during the css tests
(suggested by Connie's comments)
- suppressing delay() induces suppressing the patch
"s390x: export the clock get_clock_ms() utility"
which is already reviewed but can be picked from
the v5 series.
- changed the logic of the tests, the 4 css tests
are always run one after the other so no need to
re-run enumeration and enabling at the begining
of each tests, it has alredy been done.
This makes code simpler.
from v4 to v5
- add a patch to explicitely define the initial_cr0
value
(Janosch)
- add RB from Janosh on interrupt registration
- several formating, typo correction and removing
unnecessary initialization in "linrary resources..."
(Janosch)
- several formating and typo corrections on
"stsch enumeration test"
(Connie)
- reworking the msch test
(Connie)
- reworking of ssch test, pack the sense-id structure
(Connie)
from v3 to v4
- add RB from David and Thomas for patchs
(3) irq registration and (4) clock export
- rework the PSW bit definitions
(Thomas)
- Suppress undef DEBUG from css_dump
(Thomas)
- rework report() functions using new scheme
(Thomas)
- suppress un-necessary report_info()
- more spelling corrections
- add a loop around enable bit testing
(Connie)
- rework IRQ testing
(Connie)
- Test data addresses to be under 2G
(Connie)
from v2 to v3:
- Rework spelling
(Connie)
- More descriptions
(Connie)
- use __ASSEMBLER__ preprocessing to keep
bits definitions and C structures in the same file
(David)
- rename the new file clock.h as time.h
(Janosch, David?)
- use registration for the IO interruption
(David, Thomas)
- test the SCHIB to verify it has really be modified
(Connie)
- Lot of simplifications in the tests
(Connie)
from v1 to v2:
- saving floating point registers (David, Janosh)
- suppress unused PSW bits defintions (Janosh)
- added Thomas reviewed-by
- style and comments modifications (Connie, Janosh)
- moved get_clock_ms() into headers and use it (Thomas)
- separate header and library utility from tests
- Suppress traces, separate tests, make better usage of reports
