Re: [kvm-unit-tests PATCH v12 9/9] s390x: css: ssch/tsch with sense and interrupt

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 14/07/2020 13.15, Pierre Morel wrote:
> After a channel is enabled we start a SENSE_ID command using
> the SSCH instruction to recognize the control unit and device.
> 
> This tests the success of SSCH, the I/O interruption and the TSCH
> instructions.
> 
> The SENSE_ID command response is tested to report 0xff inside
> its reserved field and to report the same control unit type
> as the cu_type kernel argument.
> 
> Without the cu_type kernel argument, the test expects a device
> with a default control unit type of 0x3832, a.k.a virtio-net-ccw.
> 
> Signed-off-by: Pierre Morel <pmorel@xxxxxxxxxxxxx>
> ---
[...]
> @@ -102,6 +113,19 @@ struct irb {
>  	uint32_t emw[8];
>  } __attribute__ ((aligned(4)));
>  
> +#define CCW_CMD_SENSE_ID	0xe4
> +#define CSS_SENSEID_COMMON_LEN	8
> +struct senseid {
> +	/* common part */
> +	uint8_t reserved;        /* always 0x'FF' */
> +	uint16_t cu_type;        /* control unit type */
> +	uint8_t cu_model;        /* control unit model */
> +	uint16_t dev_type;       /* device type */
> +	uint8_t dev_model;       /* device model */
> +	uint8_t unused;          /* padding byte */
> +	uint8_t padding[256 - 10]; /* Extra padding for CCW */
> +} __attribute__ ((aligned(4))) __attribute__ ((packed));

Is that padding[256 - 10] right? If I count right, there are only 8
bytes before the padding field, so "10" sounds wrong here?

[...]
> diff --git a/lib/s390x/css_lib.c b/lib/s390x/css_lib.c
> index e47a945..274c293 100644
> --- a/lib/s390x/css_lib.c
> +++ b/lib/s390x/css_lib.c
[...]
> +/*
> + * css_residual_count
> + * Return the residual count, if it is valid.
> + *
> + * Return value:
> + * Success: the residual count
> + * Not meaningful: -1 (-1 can not be a valid count)
> + */
> +int css_residual_count(unsigned int schid)
> +{
> +
> +	if (!(irb.scsw.ctrl & (SCSW_SC_PENDING | SCSW_SC_PRIMARY)))
> +		goto invalid;
> +
> +	if (irb.scsw.dev_stat)
> +		if (irb.scsw.sch_stat & ~(SCSW_SCHS_PCI | SCSW_SCHS_IL))
> +			goto invalid;
> +
> +	return irb.scsw.count;
> +
> +invalid:
> +	return -1;
> +}

Cosmetical nit: Unless you want to add something between "invalid:" and
"return -1" later, I'd rather replace "goto invalid" with "return -1"
and get rid of the "invalid" label here.

 Thomas




[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [Kernel Development]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Info]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Linux Media]     [Device Mapper]

  Powered by Linux