[PATCH net-next 08/11] s390/qeth: set TX IRQ marker on last buffer in a group

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



When qeth_flush_buffers() gets called for a group of TX buffers
(currently up to 2 for OSA-style devices), the code iterates over each
buffer for some final processing.

During this processing, it sets the TX IRQ marker on the leading buffer
rather than the last one. This can result in delayed TX completion of
the trailing buffers. So pull the IRQ marker code out of the loop, and
apply it to the final buffer.

Signed-off-by: Julian Wiedmann <jwi@xxxxxxxxxxxxx>
---
 drivers/s390/net/qeth_core_main.c | 13 +++++++------
 1 file changed, 7 insertions(+), 6 deletions(-)

diff --git a/drivers/s390/net/qeth_core_main.c b/drivers/s390/net/qeth_core_main.c
index 4d1d053eebb7..164cc7f377fc 100644
--- a/drivers/s390/net/qeth_core_main.c
+++ b/drivers/s390/net/qeth_core_main.c
@@ -3617,11 +3617,11 @@ static int qeth_switch_to_nonpacking_if_needed(struct qeth_qdio_out_q *queue)
 static void qeth_flush_buffers(struct qeth_qdio_out_q *queue, int index,
 			       int count)
 {
+	struct qeth_qdio_out_buffer *buf = queue->bufs[index];
+	unsigned int qdio_flags = QDIO_FLAG_SYNC_OUTPUT;
 	struct qeth_card *card = queue->card;
-	struct qeth_qdio_out_buffer *buf;
 	int rc;
 	int i;
-	unsigned int qdio_flags;
 
 	for (i = index; i < index + count; ++i) {
 		unsigned int bidx = QDIO_BUFNR(i);
@@ -3638,9 +3638,10 @@ static void qeth_flush_buffers(struct qeth_qdio_out_q *queue, int index,
 		if (IS_IQD(card)) {
 			skb_queue_walk(&buf->skb_list, skb)
 				skb_tx_timestamp(skb);
-			continue;
 		}
+	}
 
+	if (!IS_IQD(card)) {
 		if (!queue->do_pack) {
 			if ((atomic_read(&queue->used_buffers) >=
 				(QETH_HIGH_WATERMARK_PACK -
@@ -3665,12 +3666,12 @@ static void qeth_flush_buffers(struct qeth_qdio_out_q *queue, int index,
 				buf->buffer->element[0].sflags |= SBAL_SFLAGS0_PCI_REQ;
 			}
 		}
+
+		if (atomic_read(&queue->set_pci_flags_count))
+			qdio_flags |= QDIO_FLAG_PCI_OUT;
 	}
 
 	QETH_TXQ_STAT_INC(queue, doorbell);
-	qdio_flags = QDIO_FLAG_SYNC_OUTPUT;
-	if (atomic_read(&queue->set_pci_flags_count))
-		qdio_flags |= QDIO_FLAG_PCI_OUT;
 	rc = do_QDIO(CARD_DDEV(queue->card), qdio_flags,
 		     queue->queue_no, index, count);
 
-- 
2.17.1




[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [Kernel Development]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Info]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Linux Media]     [Device Mapper]

  Powered by Linux