Re: [PATCH v2 01/10] s390x: smp: Test all CRs on initial reset

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 23.04.20 11:10, Janosch Frank wrote:
> All CRs are set to 0 and CRs 0 and 14 are set to pre-defined values,
> so we also need to test 1-13 and 15 for 0.
> 
> And while we're at it, let's also set some values to cr 1, 7 and 13, so
> we can actually be sure that they will be zeroed.
> 
> Signed-off-by: Janosch Frank <frankja@xxxxxxxxxxxxx>
> Reviewed-by: Cornelia Huck <cohuck@xxxxxxxxxx>
> Reviewed-by: Christian Borntraeger <borntraeger@xxxxxxxxxx>
> ---
>  s390x/smp.c | 16 +++++++++++++++-
>  1 file changed, 15 insertions(+), 1 deletion(-)
> 
> diff --git a/s390x/smp.c b/s390x/smp.c
> index fa40753..8c9b98a 100644
> --- a/s390x/smp.c
> +++ b/s390x/smp.c
> @@ -182,16 +182,28 @@ static void test_emcall(void)
>  	report_prefix_pop();
>  }
>  
> +/* Used to dirty registers of cpu #1 before it is reset */
> +static void test_func_initial(void)
> +{
> +	lctlg(1, 0x42000UL);
> +	lctlg(7, 0x43000UL);
> +	lctlg(13, 0x44000UL);
> +	set_flag(1);
> +}
> +
>  static void test_reset_initial(void)
>  {
>  	struct cpu_status *status = alloc_pages(0);
> +	uint64_t nullp[12] = {};

static const uint64_t nullp[12]; ? but see below

>  	struct psw psw;
>  
>  	psw.mask = extract_psw_mask();
> -	psw.addr = (unsigned long)test_func;
> +	psw.addr = (unsigned long)test_func_initial;
>  
>  	report_prefix_push("reset initial");
> +	set_flag(0);
>  	smp_cpu_start(1, psw);
> +	wait_for_flag();
>  
>  	sigp_retry(1, SIGP_INITIAL_CPU_RESET, 0, NULL);
>  	sigp(1, SIGP_STORE_STATUS_AT_ADDRESS, (uintptr_t)status, NULL);
> @@ -202,6 +214,8 @@ static void test_reset_initial(void)
>  	report(!status->fpc, "fpc");
>  	report(!status->cputm, "cpu timer");
>  	report(!status->todpr, "todpr");
> +	report(!memcmp(&status->crs[1], nullp, sizeof(status->crs[1]) * 12), "cr1-13 == 0");

sizeof(nullp) ?

> +	report(status->crs[15] == 0, "cr15 == 0");

I'd actually prefer a simple loop


for (i = 1; i <= 13; i++) {
	report(status->crs[i] == 0, "cr%d == 0", i);
}
report(status->crs[15] == 0, "cr15 == 0");

>  	report_prefix_pop();
>  
>  	report_prefix_push("initialized");
> 

Apart from that looks good to me.


-- 
Thanks,

David / dhildenb




[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [Kernel Development]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Info]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Linux Media]     [Device Mapper]

  Powered by Linux