Re: [PATCH v2 4/4] hugetlbfs: clean up command line processing

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Apr 01, 2020 at 11:38:19AM -0700, Mike Kravetz wrote:
> With all hugetlb page processing done in a single file clean up code.
> - Make code match desired semantics
>   - Update documentation with semantics
> - Make all warnings and errors messages start with 'HugeTLB:'.
> - Consistently name command line parsing routines.
> - Check for hugepages_supported() before processing parameters.
> - Add comments to code
>   - Describe some of the subtle interactions
>   - Describe semantics of command line arguments
> 
> Signed-off-by: Mike Kravetz <mike.kravetz@xxxxxxxxxx>
> ---
>  .../admin-guide/kernel-parameters.txt         | 35 ++++---
>  Documentation/admin-guide/mm/hugetlbpage.rst  | 44 +++++++++
>  mm/hugetlb.c                                  | 96 +++++++++++++++----
>  3 files changed, 142 insertions(+), 33 deletions(-)
> 
> diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
> index 1bd5454b5e5f..de653cfe1726 100644
> --- a/Documentation/admin-guide/kernel-parameters.txt
> +++ b/Documentation/admin-guide/kernel-parameters.txt
> @@ -832,12 +832,15 @@
>  			See also Documentation/networking/decnet.txt.
>  
>  	default_hugepagesz=
> -			[same as hugepagesz=] The size of the default
> -			HugeTLB page size. This is the size represented by
> -			the legacy /proc/ hugepages APIs, used for SHM, and
> -			default size when mounting hugetlbfs filesystems.
> -			Defaults to the default architecture's huge page size
> -			if not specified.
> +			[HW] The size of the default HugeTLB page size. This

Could I ask what's "HW"?  Sorry this is not a comment at all but
really a pure question I wanted to ask... :)

> +			is the size represented by the legacy /proc/ hugepages
> +			APIs.  In addition, this is the default hugetlb size
> +			used for shmget(), mmap() and mounting hugetlbfs
> +			filesystems.  If not specified, defaults to the
> +			architecture's default huge page size.  Huge page
> +			sizes are architecture dependent.  See also
> +			Documentation/admin-guide/mm/hugetlbpage.rst.
> +			Format: size[KMG]
>  
>  	deferred_probe_timeout=
>  			[KNL] Debugging option to set a timeout in seconds for
> @@ -1480,13 +1483,19 @@
>  			If enabled, boot-time allocation of gigantic hugepages
>  			is skipped.
>  
> -	hugepages=	[HW,X86-32,IA-64] HugeTLB pages to allocate at boot.
> -	hugepagesz=	[HW,IA-64,PPC,X86-64] The size of the HugeTLB pages.
> -			On x86-64 and powerpc, this option can be specified
> -			multiple times interleaved with hugepages= to reserve
> -			huge pages of different sizes. Valid pages sizes on
> -			x86-64 are 2M (when the CPU supports "pse") and 1G
> -			(when the CPU supports the "pdpe1gb" cpuinfo flag).
> +	hugepages=	[HW] Number of HugeTLB pages to allocate at boot.
> +			If this follows hugepagesz (below), it specifies
> +			the number of pages of hugepagesz to be allocated.

"... Otherwise it specifies the number of pages to allocate for the
default huge page size." ?

> +			Format: <integer>

How about add a new line here?

> +	hugepagesz=
> +			[HW] The size of the HugeTLB pages.  This is used in
> +			conjunction with hugepages (above) to allocate huge
> +			pages of a specific size at boot.  The pair
> +			hugepagesz=X hugepages=Y can be specified once for
> +			each supported huge page size. Huge page sizes are
> +			architecture dependent.  See also
> +			Documentation/admin-guide/mm/hugetlbpage.rst.
> +			Format: size[KMG]
>  
>  	hung_task_panic=
>  			[KNL] Should the hung task detector generate panics.
> diff --git a/Documentation/admin-guide/mm/hugetlbpage.rst b/Documentation/admin-guide/mm/hugetlbpage.rst
> index 1cc0bc78d10e..de340c586995 100644
> --- a/Documentation/admin-guide/mm/hugetlbpage.rst
> +++ b/Documentation/admin-guide/mm/hugetlbpage.rst
> @@ -100,6 +100,50 @@ with a huge page size selection parameter "hugepagesz=<size>".  <size> must
>  be specified in bytes with optional scale suffix [kKmMgG].  The default huge
>  page size may be selected with the "default_hugepagesz=<size>" boot parameter.
>  
> +Hugetlb boot command line parameter semantics
> +hugepagesz - Specify a huge page size.  Used in conjunction with hugepages
> +	parameter to preallocate a number of huge pages of the specified
> +	size.  Hence, hugepagesz and hugepages are typically specified in
> +	pairs such as:
> +		hugepagesz=2M hugepages=512
> +	hugepagesz can only be specified once on the command line for a
> +	specific huge page size.  Valid huge page sizes are architecture
> +	dependent.
> +hugepages - Specify the number of huge pages to preallocate.  This typically
> +	follows a valid hugepagesz parameter.  However, if hugepages is the
> +	first or only hugetlb command line parameter it specifies the number
> +	of huge pages of default size to allocate.  The number of huge pages
> +	of default size specified in this manner can be overwritten by a
> +	hugepagesz,hugepages parameter pair for the default size.
> +	For example, on an architecture with 2M default huge page size:
> +		hugepages=256 hugepagesz=2M hugepages=512
> +	will result in 512 2M huge pages being allocated.  If a hugepages
> +	parameter is preceded by an invalid hugepagesz parameter, it will
> +	be ignored.
> +default_hugepagesz - Specify the default huge page size.  This parameter can
> +	only be specified once on the command line.  No other hugetlb command
> +	line parameter is associated with default_hugepagesz.  Therefore, it
> +	can appear anywhere on the command line.  If hugepages= is the first
> +	hugetlb command line parameter, the specified number of huge pages
> +	will apply to the default huge page size specified with
> +	default_hugepagesz.  For example,
> +		hugepages=512 default_hugepagesz=2M

No strong opinion, but considering to the special case of gigantic
huge page mentioned below, I'm thinking maybe it's easier to just ask
the user to always use "hugepagesz=X hugepages=Y" pair when people
want to reserve huge pages.

For example, some user might start to use this after this series
legally:

    default_hugepagesz=2M hugepages=1024

Then the user thinks, hmm, maybe it's good to use 1G pages, by just
changing some numbers:

    default_hugepagesz=1G hugepages=2

Then if it stops working it could really confuse the user.

(Besides, it could be an extra maintainaince burden for linux itself)

> +	will result in 512 2M huge pages being allocated.  However, specifying
> +	the number of default huge pages in this manner will not apply to
> +	gigantic huge pages.  For example,
> +		hugepages=10 default_hugepagesz=1G
> +				or
> +		default_hugepagesz=1G hugepages=10
> +	will NOT result in the allocation of 10 1G huge pages.  In order to
> +	preallocate gigantic huge pages, there must be hugepagesz, hugepages
> +	parameter pair.  For example,
> +		hugepagesz=1G hugepages=10 default_hugepagesz=1G
> +				or
> +		default_hugepagesz=1G hugepagesz=1G hugepages=10
> +	will result 10 1G huge pages being allocated and the default huge
> +	page size will be set to 1G.  Valid default huge page size is
> +	architecture dependent.
> +
>  When multiple huge page sizes are supported, ``/proc/sys/vm/nr_hugepages``
>  indicates the current number of pre-allocated huge pages of the default size.
>  Thus, one can use the following command to dynamically allocate/deallocate
> diff --git a/mm/hugetlb.c b/mm/hugetlb.c
> index 72a4343509d5..74ef53f7c5a7 100644
> --- a/mm/hugetlb.c
> +++ b/mm/hugetlb.c
> @@ -3054,7 +3054,7 @@ static void __init hugetlb_sysfs_init(void)
>  		err = hugetlb_sysfs_add_hstate(h, hugepages_kobj,
>  					 hstate_kobjs, &hstate_attr_group);
>  		if (err)
> -			pr_err("Hugetlb: Unable to add hstate %s", h->name);
> +			pr_err("HugeTLB: Unable to add hstate %s", h->name);
>  	}
>  }
>  
> @@ -3158,7 +3158,7 @@ static void hugetlb_register_node(struct node *node)
>  						nhs->hstate_kobjs,
>  						&per_node_hstate_attr_group);
>  		if (err) {
> -			pr_err("Hugetlb: Unable to add hstate %s for node %d\n",
> +			pr_err("HugeTLB: Unable to add hstate %s for node %d\n",
>  				h->name, node->dev.id);
>  			hugetlb_unregister_node(node);
>  			break;
> @@ -3209,19 +3209,35 @@ static int __init hugetlb_init(void)
>  	if (!hugepages_supported())
>  		return 0;
>  
> -	if (!size_to_hstate(default_hstate_size)) {
> -		if (default_hstate_size != 0) {
> -			pr_err("HugeTLB: unsupported default_hugepagesz %lu. Reverting to %lu\n",
> -			       default_hstate_size, HPAGE_SIZE);
> -		}
> -
> +	/*
> +	 * Make sure HPAGE_SIZE (HUGETLB_PAGE_ORDER) hstate exists.  Some
> +	 * architectures depend on setup being done here.
> +	 *
> +	 * If a valid default huge page size was specified on the command line,
> +	 * add associated hstate if necessary.  If not, set default_hstate_size
> +	 * to default size.  default_hstate_idx is used at runtime to identify
> +	 * the default huge page size/hstate.
> +	 */
> +	hugetlb_add_hstate(HUGETLB_PAGE_ORDER);
> +	if (default_hstate_size)
> +		hugetlb_add_hstate(ilog2(default_hstate_size) - PAGE_SHIFT);
> +	else
>  		default_hstate_size = HPAGE_SIZE;
> -		hugetlb_add_hstate(HUGETLB_PAGE_ORDER);
> -	}
>  	default_hstate_idx = hstate_index(size_to_hstate(default_hstate_size));
> +
> +	/*
> +	 * default_hstate_max_huge_pages != 0 indicates a count (hugepages=)
> +	 * specified before a size (hugepagesz=).  Use this count for the
> +	 * default huge page size, unless a specific value was specified for
> +	 * this size in a hugepagesz/hugepages pair.
> +	 */
>  	if (default_hstate_max_huge_pages) {

Since we're refactoring this - Could default_hstate_max_huge_pages be
dropped directly (in hugepages= we can create the default hstate, then
we set max_huge_pages of the default hstate there)?  Or did I miss
anything important?

>  		if (!default_hstate.max_huge_pages)
> -			default_hstate.max_huge_pages = default_hstate_max_huge_pages;
> +			default_hstate.max_huge_pages =
> +				default_hstate_max_huge_pages;
> +		else
> +			pr_warn("HugeTLB: First hugepages=%lu ignored\n",
> +				default_hstate_max_huge_pages);
>  	}
>  
>  	hugetlb_init_hstates();
> @@ -3274,20 +3290,31 @@ void __init hugetlb_add_hstate(unsigned int order)
>  	parsed_hstate = h;
>  }
>  
> -static int __init hugetlb_nrpages_setup(char *s)
> +/*
> + * hugepages command line processing
> + * hugepages normally follows a valid hugepagsz specification.  If not, ignore
> + * the hugepages value.  hugepages can also be the first huge page command line
> + * option in which case it specifies the number of huge pages for the default
> + * size.
> + */
> +static int __init hugepages_setup(char *s)
>  {
>  	unsigned long *mhp;
>  	static unsigned long *last_mhp;
>  
> +	if (!hugepages_supported()) {
> +		pr_warn("HugeTLB: huge pages not supported, ignoring hugepages = %s\n", s);
> +		return 0;
> +	}
> +
>  	if (!parsed_valid_hugepagesz) {
> -		pr_warn("hugepages = %s preceded by "
> -			"an unsupported hugepagesz, ignoring\n", s);
> +		pr_warn("HugeTLB: hugepages = %s preceded by an unsupported hugepagesz, ignoring\n", s);

s/preceded/is preceded/?

>  		parsed_valid_hugepagesz = true;
> -		return 1;
> +		return 0;
>  	}
>  	/*
> -	 * !hugetlb_max_hstate means we haven't parsed a hugepagesz= parameter yet,
> -	 * so this hugepages= parameter goes to the "default hstate".
> +	 * !hugetlb_max_hstate means we haven't parsed a hugepagesz= parameter
> +	 * yet, so this hugepages= parameter goes to the "default hstate".
>  	 */
>  	else if (!hugetlb_max_hstate)
>  		mhp = &default_hstate_max_huge_pages;
> @@ -3295,8 +3322,8 @@ static int __init hugetlb_nrpages_setup(char *s)
>  		mhp = &parsed_hstate->max_huge_pages;
>  
>  	if (mhp == last_mhp) {
> -		pr_warn("hugepages= specified twice without interleaving hugepagesz=, ignoring\n");
> -		return 1;
> +		pr_warn("HugeTLB: hugepages= specified twice without interleaving hugepagesz=, ignoring hugepages=%s\n", s);
> +		return 0;
>  	}
>  
>  	if (sscanf(s, "%lu", mhp) <= 0)
> @@ -3314,12 +3341,24 @@ static int __init hugetlb_nrpages_setup(char *s)
>  
>  	return 1;
>  }
> -__setup("hugepages=", hugetlb_nrpages_setup);
> +__setup("hugepages=", hugepages_setup);
>  
> +/*
> + * hugepagesz command line processing
> + * A specific huge page size can only be specified once with hugepagesz.
> + * hugepagesz is followed by hugepages on the command line.  The global
> + * variable 'parsed_valid_hugepagesz' is used to determine if prior
> + * hugepagesz argument was valid.
> + */
>  static int __init hugepagesz_setup(char *s)
>  {
>  	unsigned long size;
>  
> +	if (!hugepages_supported()) {
> +		pr_warn("HugeTLB: huge pages not supported, ignoring hugepagesz = %s\n", s);
> +		return 0;
> +	}
> +
>  	size = (unsigned long)memparse(s, NULL);
>  
>  	if (!arch_hugetlb_valid_size(size)) {
> @@ -3329,19 +3368,31 @@ static int __init hugepagesz_setup(char *s)
>  	}
>  
>  	if (size_to_hstate(size)) {
> +		parsed_valid_hugepagesz = false;
>  		pr_warn("HugeTLB: hugepagesz %s specified twice, ignoring\n", s);
>  		return 0;
>  	}
>  
> +	parsed_valid_hugepagesz = true;
>  	hugetlb_add_hstate(ilog2(size) - PAGE_SHIFT);
>  	return 1;
>  }
>  __setup("hugepagesz=", hugepagesz_setup);
>  
> +/*
> + * default_hugepagesz command line input
> + * Only one instance of default_hugepagesz allowed on command line.  Do not
> + * add hstate here as that will confuse hugepagesz/hugepages processing.
> + */
>  static int __init default_hugepagesz_setup(char *s)
>  {
>  	unsigned long size;
>  
> +	if (!hugepages_supported()) {
> +		pr_warn("HugeTLB: huge pages not supported, ignoring default_hugepagesz = %s\n", s);
> +		return 0;
> +	}
> +
>  	size = (unsigned long)memparse(s, NULL);
>  
>  	if (!arch_hugetlb_valid_size(size)) {
> @@ -3349,6 +3400,11 @@ static int __init default_hugepagesz_setup(char *s)
>  		return 0;
>  	}
>  
> +	if (default_hstate_size) {
> +		pr_err("HugeTLB: default_hugepagesz previously specified, ignoring %s\n", s);
> +		return 0;
> +	}

Nitpick: ideally this can be moved before memparse().

Thanks,

> +
>  	default_hstate_size = size;
>  	return 1;
>  }
> -- 
> 2.25.1
> 
> 

-- 
Peter Xu




[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [Kernel Development]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Info]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Linux Media]     [Device Mapper]

  Powered by Linux