Re: [PATCH 1/8] iommu/vt-d: clean up 32bit si_domain assignment

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

On 12/21/19 11:03 PM, Tom Murphy wrote:
@@ -5618,9 +5583,13 @@ static int intel_iommu_add_device(struct device *dev)
  	struct iommu_domain *domain;
  	struct intel_iommu *iommu;
  	struct iommu_group *group;
+	u64 dma_mask = *dev->dma_mask;
  	u8 bus, devfn;
  	int ret;
+ if (dev->coherent_dma_mask && dev->coherent_dma_mask < dma_mask)
+		dma_mask = dev->coherent_dma_mask;
+
  	iommu = device_to_iommu(dev, &bus, &devfn);
  	if (!iommu)
  		return -ENODEV;
@@ -5640,7 +5609,12 @@ static int intel_iommu_add_device(struct device *dev)
  	domain = iommu_get_domain_for_dev(dev);
  	dmar_domain = to_dmar_domain(domain);
  	if (domain->type == IOMMU_DOMAIN_DMA) {
-		if (device_def_domain_type(dev) == IOMMU_DOMAIN_IDENTITY) {
+		/*
+		 * We check dma_mask >= dma_get_required_mask(dev) because
+		 * 32 bit DMA falls back to non-identity mapping.
+		 */
+		if (device_def_domain_type(dev) == IOMMU_DOMAIN_IDENTITY &&
+				dma_mask >= dma_get_required_mask(dev)) {
  			ret = iommu_request_dm_for_dev(dev);
  			if (ret) {
  				dmar_remove_one_dev_info(dev);

dev->dma_mask is set to 32bit by default. During loading driver, it sets
the real dma_mask with dma_set_mask() according to the real capability.
Here you will always see 32bit dma_mask for each device.

Best regards,
baolu



[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [Kernel Development]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Info]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Linux Media]     [Device Mapper]

  Powered by Linux