[PATCH net 2/3] s390/qeth: fix promiscuous mode after reset

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



When managing the promiscuous mode during an RX modeset, qeth caches the
current HW state to avoid repeated programming of the same state on each
modeset.

But while tearing down a device, we forget to clear the cached state. So
when the device is later set online again, the initial RX modeset
doesn't program the promiscuous mode since we believe it is already
enabled.
Fix this by clearing the cached state in the tear-down path.

Note that for the SBP variant of promiscuous mode, this accidentally
works right now because we unconditionally restore the SBP role while
re-initializing.

Fixes: 4a71df50047f ("qeth: new qeth device driver")
Signed-off-by: Julian Wiedmann <jwi@xxxxxxxxxxxxx>
Reviewed-by: Alexandra Winter <wintera@xxxxxxxxxxxxx>
---
 drivers/s390/net/qeth_l2_main.c | 1 +
 drivers/s390/net/qeth_l2_sys.c  | 3 ++-
 drivers/s390/net/qeth_l3_main.c | 1 +
 3 files changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/s390/net/qeth_l2_main.c b/drivers/s390/net/qeth_l2_main.c
index 9086bc04fa6b..8c95e6019bac 100644
--- a/drivers/s390/net/qeth_l2_main.c
+++ b/drivers/s390/net/qeth_l2_main.c
@@ -295,6 +295,7 @@ static void qeth_l2_stop_card(struct qeth_card *card)
 
 	flush_workqueue(card->event_wq);
 	card->info.mac_bits &= ~QETH_LAYER2_MAC_REGISTERED;
+	card->info.promisc_mode = 0;
 }
 
 static int qeth_l2_process_inbound_buffer(struct qeth_card *card,
diff --git a/drivers/s390/net/qeth_l2_sys.c b/drivers/s390/net/qeth_l2_sys.c
index f70c7aac2dcc..7fa325cf6f8d 100644
--- a/drivers/s390/net/qeth_l2_sys.c
+++ b/drivers/s390/net/qeth_l2_sys.c
@@ -262,7 +262,8 @@ void qeth_l2_setup_bridgeport_attrs(struct qeth_card *card)
 		return;
 
 	mutex_lock(&card->sbp_lock);
-	if (card->options.sbp.role != QETH_SBP_ROLE_NONE) {
+	if (!card->options.sbp.reflect_promisc &&
+	    card->options.sbp.role != QETH_SBP_ROLE_NONE) {
 		/* Conditional to avoid spurious error messages */
 		qeth_bridgeport_setrole(card, card->options.sbp.role);
 		/* Let the callback function refresh the stored role value. */
diff --git a/drivers/s390/net/qeth_l3_main.c b/drivers/s390/net/qeth_l3_main.c
index 27126330a4b0..04e301de376f 100644
--- a/drivers/s390/net/qeth_l3_main.c
+++ b/drivers/s390/net/qeth_l3_main.c
@@ -1314,6 +1314,7 @@ static void qeth_l3_stop_card(struct qeth_card *card)
 	}
 
 	flush_workqueue(card->event_wq);
+	card->info.promisc_mode = 0;
 }
 
 static void qeth_l3_set_promisc_mode(struct qeth_card *card)
-- 
2.17.1




[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [Kernel Development]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Info]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Linux Media]     [Device Mapper]

  Powered by Linux