Re: [PATCH v2 4/4] powerpc: Book3S 64-bit "heavyweight" KASAN support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 12/12/19 1:24 am, Daniel Axtens wrote:
> Hi Balbir,
> 
>>>>> +Discontiguous memory can occur when you have a machine with memory spread
>>>>> +across multiple nodes. For example, on a Talos II with 64GB of RAM:
>>>>> +
>>>>> + - 32GB runs from 0x0 to 0x0000_0008_0000_0000,
>>>>> + - then there's a gap,
>>>>> + - then the final 32GB runs from 0x0000_2000_0000_0000 to 0x0000_2008_0000_0000
>>>>> +
>>>>> +This can create _significant_ issues:
>>>>> +
>>>>> + - If we try to treat the machine as having 64GB of _contiguous_ RAM, we would
>>>>> +   assume that ran from 0x0 to 0x0000_0010_0000_0000. We'd then reserve the
>>>>> +   last 1/8th - 0x0000_000e_0000_0000 to 0x0000_0010_0000_0000 as the shadow
>>>>> +   region. But when we try to access any of that, we'll try to access pages
>>>>> +   that are not physically present.
>>>>> +
>>>>
>>>> If we reserved memory for KASAN from each node (discontig region), we might survive
>>>> this no? May be we need NUMA aware KASAN? That might be a generic change, just thinking
>>>> out loud.
>>>
>>> The challenge is that - AIUI - in inline instrumentation, the compiler
>>> doesn't generate calls to things like __asan_loadN and
>>> __asan_storeN. Instead it uses -fasan-shadow-offset to compute the
>>> checks, and only calls the __asan_report* family of functions if it
>>> detects an issue. This also matches what I can observe with objdump
>>> across outline and inline instrumentation settings.
>>>
>>> This means that for this sort of thing to work we would need to either
>>> drop back to out-of-line calls, or teach the compiler how to use a
>>> nonlinear, NUMA aware mem-to-shadow mapping.
>>
>> Yes, out of line is expensive, but seems to work well for all use cases.
> 
> I'm not sure this is true. Looking at scripts/Makefile.kasan, allocas,
> stacks and globals will only be instrumented if you can provide
> KASAN_SHADOW_OFFSET. In the case you're proposing, we can't provide a
> static offset. I _think_ this is a compiler limitation, where some of
> those instrumentations only work/make sense with a static offset, but
> perhaps that's not right? Dmitry and Andrey, can you shed some light on
> this?
> 

>From what I can read, everything should still be supported, the info page
for gcc states that globals, stack asan should be enabled by default.
allocas may have limited meaning if stack-protector is turned on (no?)

> Also, as it currently stands, the speed difference between inline and
> outline is approximately 2x, and given that we'd like to run this
> full-time in syzkaller I think there is value in trading off speed for
> some limitations.
> 

Full speed vs actually working across different configurations?

>> BTW, the current set of patches just hang if I try to make the default
>> mode as out of line
> 
> Do you have CONFIG_RELOCATABLE?
> 
> I've tested the following process:
> 
> # 1) apply patches on a fresh linux-next
> # 2) output dir
> mkdir ../out-3s-kasan
> 
> # 3) merge in the relevant config snippets
> cat > kasan.config << EOF
> CONFIG_EXPERT=y
> CONFIG_LD_HEAD_STUB_CATCH=y
> 
> CONFIG_RELOCATABLE=y
> 
> CONFIG_KASAN=y
> CONFIG_KASAN_GENERIC=y
> CONFIG_KASAN_OUTLINE=y
> 
> CONFIG_PHYS_MEM_SIZE_FOR_KASAN=2048
> EOF
> 

I think I got CONFIG_PHYS_MEM_SIZE_FOR_KASN wrong, honestly I don't get why
we need this size? The size is in MB and the default is 0. 

Why does the powerpc port of KASAN need the SIZE to be explicitly specified?

Balbir Singh.



[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [Kernel Development]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Info]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Linux Media]     [Device Mapper]

  Powered by Linux