On Fri, 6 Sep 2019 20:13:51 -0400
Matthew Rosato <mjrosato@xxxxxxxxxxxxx> wrote:
> From: Pierre Morel <pmorel@xxxxxxxxxxxxx>
>
> We define a new configuration entry for VFIO/PCI, VFIO_PCI_ZDEV
>
> When the VFIO_PCI_ZDEV feature is configured we initialize
> a new device region, VFIO_REGION_SUBTYPE_ZDEV_CLP, to hold
> the information from the ZPCI device the use
>
> Signed-off-by: Pierre Morel <pmorel@xxxxxxxxxxxxx>
> Signed-off-by: Matthew Rosato <mjrosato@xxxxxxxxxxxxx>
> ---
> drivers/vfio/pci/Kconfig | 7 +++
> drivers/vfio/pci/Makefile | 1 +
> drivers/vfio/pci/vfio_pci.c | 9 ++++
> drivers/vfio/pci/vfio_pci_private.h | 10 +++++
> drivers/vfio/pci/vfio_pci_zdev.c | 85 +++++++++++++++++++++++++++++++++++++
> 5 files changed, 112 insertions(+)
> create mode 100644 drivers/vfio/pci/vfio_pci_zdev.c
>
> diff --git a/drivers/vfio/pci/Kconfig b/drivers/vfio/pci/Kconfig
> index ac3c1dd..d4562a8 100644
> --- a/drivers/vfio/pci/Kconfig
> +++ b/drivers/vfio/pci/Kconfig
> @@ -45,3 +45,10 @@ config VFIO_PCI_NVLINK2
> depends on VFIO_PCI && PPC_POWERNV
> help
> VFIO PCI support for P9 Witherspoon machine with NVIDIA V100 GPUs
> +
> +config VFIO_PCI_ZDEV
> + bool "VFIO PCI Generic for ZPCI devices"
> + depends on VFIO_PCI && S390
> + default y
> + help
> + VFIO PCI support for S390 Z-PCI devices
>From that description, I'd have no idea whether I'd want that or not.
Is there any downside to enabling it?
> diff --git a/drivers/vfio/pci/Makefile b/drivers/vfio/pci/Makefile
> index f027f8a..781e080 100644
> --- a/drivers/vfio/pci/Makefile
> +++ b/drivers/vfio/pci/Makefile
> @@ -3,5 +3,6 @@
> vfio-pci-y := vfio_pci.o vfio_pci_intrs.o vfio_pci_rdwr.o vfio_pci_config.o
> vfio-pci-$(CONFIG_VFIO_PCI_IGD) += vfio_pci_igd.o
> vfio-pci-$(CONFIG_VFIO_PCI_NVLINK2) += vfio_pci_nvlink2.o
> +vfio-pci-$(CONFIG_VFIO_PCI_ZDEV) += vfio_pci_zdev.o
>
> obj-$(CONFIG_VFIO_PCI) += vfio-pci.o
> diff --git a/drivers/vfio/pci/vfio_pci.c b/drivers/vfio/pci/vfio_pci.c
> index 703948c..b40544a 100644
> --- a/drivers/vfio/pci/vfio_pci.c
> +++ b/drivers/vfio/pci/vfio_pci.c
> @@ -356,6 +356,15 @@ static int vfio_pci_enable(struct vfio_pci_device *vdev)
> }
> }
>
> + if (IS_ENABLED(CONFIG_VFIO_PCI_ZDEV)) {
> + ret = vfio_pci_zdev_init(vdev);
> + if (ret) {
> + dev_warn(&vdev->pdev->dev,
> + "Failed to setup ZDEV regions\n");
> + goto disable_exit;
> + }
> + }
> +
> vfio_pci_probe_mmaps(vdev);
>
> return 0;
> diff --git a/drivers/vfio/pci/vfio_pci_private.h b/drivers/vfio/pci/vfio_pci_private.h
> index ee6ee91..08e02f5 100644
> --- a/drivers/vfio/pci/vfio_pci_private.h
> +++ b/drivers/vfio/pci/vfio_pci_private.h
> @@ -186,4 +186,14 @@ static inline int vfio_pci_ibm_npu2_init(struct vfio_pci_device *vdev)
> return -ENODEV;
> }
> #endif
> +
> +#ifdef CONFIG_VFIO_PCI_ZDEV
> +extern int vfio_pci_zdev_init(struct vfio_pci_device *vdev);
> +#else
> +static inline int vfio_pci_zdev_init(struct vfio_pci_device *vdev)
> +{
> + return -ENODEV;
If you really want to have this configurable, why not just return 0
here and skip the IS_ENABLED check above?
> +}
> +#endif
> +
> #endif /* VFIO_PCI_PRIVATE_H */
(...)
