Re: [PATCH v3 3/8] s390/cio: add basic protected virtualization support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





On 03.06.19 14:06, Cornelia Huck wrote:
On Wed, 29 May 2019 14:26:52 +0200
Michael Mueller <mimu@xxxxxxxxxxxxx> wrote:

From: Halil Pasic <pasic@xxxxxxxxxxxxx>

As virtio-ccw devices are channel devices, we need to use the dma area
for any communication with the hypervisor.

"we need to use the dma area within the common I/O layer for any
communication with the hypervisor. Note that we do not need to use that
area for control blocks directly referenced by instructions, e.g. the
orb."

using this now


...although I'm still not particularly confident about the actual
distinction here? I'm trusting you that you actually have tested it,
though :)


It handles neither QDIO in the common code, nor any device type specific
stuff (like channel programs constructed by the DASD driver).

An interesting side effect is that virtio structures are now going to
get allocated in 31 bit addressable storage.

Signed-off-by: Halil Pasic <pasic@xxxxxxxxxxxxx>
Reviewed-by: Sebastian Ott <sebott@xxxxxxxxxxxxx>
Signed-off-by: Michael Mueller <mimu@xxxxxxxxxxxxx>
---
  arch/s390/include/asm/ccwdev.h   |  4 +++
  drivers/s390/cio/ccwreq.c        |  9 +++---
  drivers/s390/cio/device.c        | 67 +++++++++++++++++++++++++++++++++-------
  drivers/s390/cio/device_fsm.c    | 49 +++++++++++++++++------------
  drivers/s390/cio/device_id.c     | 20 ++++++------
  drivers/s390/cio/device_ops.c    | 21 +++++++++++--
  drivers/s390/cio/device_pgid.c   | 22 +++++++------
  drivers/s390/cio/device_status.c | 24 +++++++-------
  drivers/s390/cio/io_sch.h        | 20 +++++++++---
  drivers/s390/virtio/virtio_ccw.c | 10 ------
  10 files changed, 163 insertions(+), 83 deletions(-)

(...)

@@ -1593,20 +1625,31 @@ struct ccw_device * __init ccw_device_create_console(struct ccw_driver *drv)
  		return ERR_CAST(sch);
io_priv = kzalloc(sizeof(*io_priv), GFP_KERNEL | GFP_DMA);
-	if (!io_priv) {
-		put_device(&sch->dev);
-		return ERR_PTR(-ENOMEM);
-	}
+	if (!io_priv)
+		goto err_priv;
+	io_priv->dma_area = dma_alloc_coherent(&sch->dev,
+				sizeof(*io_priv->dma_area),
+				&io_priv->dma_area_dma, GFP_KERNEL);
+	if (!io_priv->dma_area)
+		goto err_dma_area;
  	set_io_private(sch, io_priv);
  	cdev = io_subchannel_create_ccwdev(sch);
  	if (IS_ERR(cdev)) {
  		put_device(&sch->dev);
+		dma_free_coherent(&sch->dev, sizeof(*io_priv->dma_area),
+				  io_priv->dma_area, io_priv->dma_area_dma);
  		kfree(io_priv);

<pre-existing, not introduced by this patch>
Shouldn't that branch do set_io_private(sch, NULL)? Not sure if any
code would make use of it, but it's probably better to clean out
references to freed objects.

Added behind kfree(). I hope nobody asks for a separate patch. ;)

</pre-existing, not introduced by this patch>

  		return cdev;
  	}
  	cdev->drv = drv;
  	ccw_device_set_int_class(cdev);
  	return cdev;
+
+err_dma_area:
+	kfree(io_priv);
+err_priv:
+	put_device(&sch->dev);
+	return ERR_PTR(-ENOMEM);
  }
void __init ccw_device_destroy_console(struct ccw_device *cdev)

With the reservations above,
Reviewed-by: Cornelia Huck <cohuck@xxxxxxxxxx>


Thanks,
Michael




[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [Kernel Development]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Info]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Linux Media]     [Device Mapper]

  Powered by Linux