Re: [PATCH 05/10] s390/cio: introduce DMA pools to cio

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, 16 May 2019 15:59:22 +0200 (CEST)
Sebastian Ott <sebott@xxxxxxxxxxxxx> wrote:

> On Sun, 12 May 2019, Halil Pasic wrote:
> > I've also got code that deals with AIRQ_IV_CACHELINE by turning the
> > kmem_cache into a dma_pool.
> > 
> > Cornelia, Sebastian which approach do you prefer:
> > 1) get rid of cio_dma_pool and AIRQ_IV_CACHELINE, and waste a page per
> > vector, or
> > 2) go with the approach taken by the patch below?
> 
> We only have a couple of users for airq_iv:
> 
> virtio_ccw.c: 2K bits


You mean a single allocation is 2k bits (VIRTIO_IV_BITS = 256 * 8)? My
understanding is that the upper bound is more like:
MAX_AIRQ_AREAS * VIRTIO_IV_BITS = 20 * 256 * 8 = 40960 bits.

In practice it is most likely just 2k.

> 
> pci with floating IRQs: <= 2K (for the per-function bit vectors)
>                         1..4K (for the summary bit vector)
>

As far as I can tell with virtio_pci arch_setup_msi_irqs() gets called
once per device and allocates a small number of bits (2 and 3 in my
test, it may depend on #virtqueues, but I did not check).

So for an upper bound we would have to multiply with the upper bound of
pci devices/functions. What is the upper bound on the number of
functions?

> pci with CPU directed IRQs: 2K (for the per-CPU bit vectors)
>                             1..nr_cpu (for the summary bit vector)
> 

I guess this is the same.

> 
> The options are:
> * page allocations for everything

Worst case we need 20 + #max_pci_dev pages. At the moment we allocate
from ZONE_DMA (!) and waste a lot.

> * dma_pool for AIRQ_IV_CACHELINE ,gen_pool for others

I prefer this. Explanation follows.

> * dma_pool for everything
> 

Less waste by factor factor 16.

> I think we should do option 3 and use a dma_pool with cachesize
> alignment for everything (as a prerequisite we have to limit
> config PCI_NR_FUNCTIONS to 2K - but that is not a real constraint).
>

I prefer option 3 because it is conceptually the smallest change, and
provides the behavior which is closest to the current one.

Commit  414cbd1e3d14 "s390/airq: provide cacheline aligned
ivs" (Sebastian Ott, 2019-02-27) could have been smaller had you implemented
'kmem_cache for everything' (and I would have had just to replace kmem_cache with
dma_cache to achieve option 3). For some reason you decided to keep the
iv->vector = kzalloc(size, GFP_KERNEL) code-path and make the client code request
iv->vector = kmem_cache_zalloc(airq_iv_cache, GFP_KERNEL) explicitly, using a flag
which you only decided to use for directed pci irqs AFAICT.

My understanding of these decisions, and especially of the rationale
behind commit 414cbd1e3d14 is limited. Thus if option 3 is the way to
go, and the choices made by 414cbd1e3d14 were sub-optimal, I would feel
much more comfortable if you provided a patch that revises  and switches
everything to kmem_chache. I would then just swap kmem_cache out with a
dma_cache and my change would end up a straightforward and relatively
clean one.

So Sebastian, what shall we do?

Regards,
Halil




> Sebastian
> 




[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [Kernel Development]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Info]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Linux Media]     [Device Mapper]

  Powered by Linux