This patch series implements PQAP/AQIC interception in KVM.
1) Data to handle GISA interrupt for AQIC
To implement this we need to add a new structure, vfio_ap_queue,
to be able to retrieve the mediated device associated with a queue
and specific values needed to register/unregister the interrupt
structures:
- APQN: to be able to issue the commands and search for queue
structures
- NIB and old NIB : to unpin the NIB on clear IRQ
- ISC and old ISC : to unregister with the GIB interface
- matrix_mdev: to retrieve the associate matrix and mediated device
Specific handling bei keeping old values when re-registering is
needed because the guest could unregister interrupt in a invisble
manner bei issuing an un-interceptible RESET command.
Reset commands issued directly by the guest and indirectly when
removing the guest unpin the memory and deregister the ISC.
The vfio_ap_queue is associated to the ap_device during the probe
of the device and dissociated during the remove of the ap_device.
The vfio_ap_queue is associated to the matrix mediated device during
each interception of the AQIC command, so it do not need to be
dissociated until the guest is terminated.
The life of the vfio_ap_queue will be protected by the matrix_dev lock
to guaranty that no change can occur to the CRYCB or that devices can
not be removed when a vfio_ap_queue is in use.
2) KVM destroy race conditions
To make sure that KVM do not vanish and GISA is still available
when the VFIO_AP driver is in used we take a reference to KVM
during the opening of the mediated device and release it on
releasing the mediated device.
3) Interception of PQAP
The driver registers a hook structure to KVM providing:
- a pointer to a function implementing PQAP(AQIC) handling
- the reference to the module owner of the hook
On interception by KVM we do not change the behavior, returning
-EOPNOTSUPP to the user in the case AP instructions are not
supported by the host or by the guest.
Otherwise we verify the exceptions cases before trying to call
the vfio_ap hook.
In the case we do not find a hook we assume that the CRYCB has not
been setup for the guest and is empty.
4) Removing the AP device
Removing the AP device without having unassign it is clearly
discourage by the documentation.
The patch series does not check if the queue is used by a
guest and simply free the vfio_ap_queue.
5) Associated QEMU patch
There is a QEMU patch which is needed to enable the PQAP/AQIC
facility in the guest.
Posted in qemu-devel@xxxxxxxxxx as:
Message-Id: <1550146494-21085-1-git-send-email-pmorel@xxxxxxxxxxxxx>
Pierre Morel (4):
s390: ap: kvm: add PQAP interception for AQIC
vfio: ap: register IOMMU VFIO notifier
s390: ap: implement PAPQ AQIC interception in kernel
s390: ap: kvm: Enable PQAP/AQIC facility for the guest
arch/s390/include/asm/kvm_host.h | 7 +
arch/s390/kvm/priv.c | 86 +++++++++
arch/s390/tools/gen_facilities.c | 1 +
drivers/s390/crypto/ap_bus.h | 1 +
drivers/s390/crypto/vfio_ap_drv.c | 30 ++-
drivers/s390/crypto/vfio_ap_ops.c | 336 +++++++++++++++++++++++++++++++++-
drivers/s390/crypto/vfio_ap_private.h | 15 ++
7 files changed, 468 insertions(+), 8 deletions(-)
--
2.7.4
Changelog:
Changelog from v6:
- Not taking care if the AP queue is associated with a guest
admin is warn in the odcumentation
(Tony, Halil)
- Using WARN_ON_ONCE, direct call to report specification errors
(Christian)
- Wait until the IRQ bit is cleared when clearing interrupts
(Tony, Halil)
- Some minor changes and add some comments before
vfio_ap_free_irq_data
(Pierre)
- initializing the pointer to matrix_mdev in vfio_ap_queue
during the interception and suppress the association during
assignment and the usage of lists.
(Tony, Halil)
- Merging patches for creation of vfio_ap_queue, initialization
and use of vfio_ap_queue during interception of PQAP/AQIC
(Conny)
Changelog from v5:
- Refactoring of the PQAP interception after all discussions
(Conny, Halil (offline))
- take a big lock around open to avoid parallel changes through
assignment
- verify that at least one queue has a APID or APQI when
first assignment is done to not accept unavailable APID/APQI
(myself)
- Adding comment for locks on free_list
(Conny)
- Modified comment for
"s390: ap: setup relation betwen KVM and mediated device"
(Halil)
Changelog from v4:
- Add forgotten locking for vfio_get_queue() in pqap callback
(Conny / Halil)
- Add KVM reference counting to make sure GISA is free after IRQ
(Christian / Halil)
- Take care that ISC = 0 is a valid ISC
(Halil)
- Integrate the PQAP call back in a structure with module owner
reference counting to make sure the callback does not disappear.
- Restrict functionality to always open KVM before opening the
VFIO device.
- Search all devices in the vfio_ap driver list when associating
a queue to a mediated device
(Halil / Tony)
- Get vfio_ap_free_irq() out of vfio_ap_mdev_reset_queue() to call
it always, whatever the result of the reset.
(Tony)
Changelog from v3:
- Associating the vfio_queues during APID/APQI assign
(Tony)
- Dissociating the vfio_queues during APID/APQI unassign
(Tony)
- Taking care that the guest can directly disable the interrupt
by using a RESET
(Halil)
- Remove the patch creating the matrix bus to accelerate its
integration in Linux stable
(Christian)
Changelog from v1:
- Refactoring to handle interception in kernel instead of in
QEMU
(Halil)
