The following equivalence or replacement relationship exists:
iommu=pt <--> iommu.dma_mode=passthrough.
iommu=nopt can be replaced with iommu.dma_mode=lazy.
intel_iommu=strict <--> iommu.dma_mode=strict.
amd_iommu=fullflush <--> iommu.dma_mode=strict.
Signed-off-by: Zhen Lei <thunder.leizhen@xxxxxxxxxx>
---
Documentation/admin-guide/kernel-parameters.txt | 6 ++---
arch/ia64/include/asm/iommu.h | 2 --
arch/ia64/kernel/pci-dma.c | 2 --
arch/x86/include/asm/iommu.h | 1 -
arch/x86/kernel/pci-dma.c | 35 ++++++++++++-------------
drivers/iommu/Kconfig | 2 +-
drivers/iommu/amd_iommu.c | 10 +++----
drivers/iommu/amd_iommu_init.c | 4 +--
drivers/iommu/amd_iommu_types.h | 6 -----
drivers/iommu/intel-iommu.c | 9 +++----
10 files changed, 31 insertions(+), 46 deletions(-)
diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
index 176f96032d9d62a..ca6edc529d6a614 100644
--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt
@@ -1815,9 +1815,9 @@
options(such as CONFIG_IOMMU_DEFAULT_PASSTHROUGH) to
choose which mode to be used.
Note: For historical reasons, ARM64/S390/PPC/X86 have
- their specific options. Currently, only ARM64/S390/PPC
- support this boot option, and hope other ARCHs to use
- this as generic boot option.
+ their specific options, but strongly recommended switch
+ to use this one, the new ARCHs should use this generic
+ boot option.
passthrough
Configure DMA to bypass the IOMMU by default.
lazy
diff --git a/arch/ia64/include/asm/iommu.h b/arch/ia64/include/asm/iommu.h
index 7429a72f3f92199..92aceef63710861 100644
--- a/arch/ia64/include/asm/iommu.h
+++ b/arch/ia64/include/asm/iommu.h
@@ -8,10 +8,8 @@
extern void no_iommu_init(void);
#ifdef CONFIG_INTEL_IOMMU
extern int force_iommu, no_iommu;
-extern int iommu_pass_through;
extern int iommu_detected;
#else
-#define iommu_pass_through (0)
#define no_iommu (1)
#define iommu_detected (0)
#endif
diff --git a/arch/ia64/kernel/pci-dma.c b/arch/ia64/kernel/pci-dma.c
index fe988c49f01ce6a..f5d49cd3fbb01a9 100644
--- a/arch/ia64/kernel/pci-dma.c
+++ b/arch/ia64/kernel/pci-dma.c
@@ -22,8 +22,6 @@
int force_iommu __read_mostly;
#endif
-int iommu_pass_through;
-
static int __init pci_iommu_init(void)
{
if (iommu_detected)
diff --git a/arch/x86/include/asm/iommu.h b/arch/x86/include/asm/iommu.h
index baedab8ac5385f7..b91623d521d9f0f 100644
--- a/arch/x86/include/asm/iommu.h
+++ b/arch/x86/include/asm/iommu.h
@@ -4,7 +4,6 @@
extern int force_iommu, no_iommu;
extern int iommu_detected;
-extern int iommu_pass_through;
/* 10 seconds */
#define DMAR_OPERATION_TIMEOUT ((cycles_t) tsc_khz*10*1000)
diff --git a/arch/x86/kernel/pci-dma.c b/arch/x86/kernel/pci-dma.c
index d460998ae828514..fc64928e47cb860 100644
--- a/arch/x86/kernel/pci-dma.c
+++ b/arch/x86/kernel/pci-dma.c
@@ -6,6 +6,7 @@
#include <linux/memblock.h>
#include <linux/gfp.h>
#include <linux/pci.h>
+#include <linux/iommu.h>
#include <asm/proto.h>
#include <asm/dma.h>
@@ -34,21 +35,6 @@
/* Set this to 1 if there is a HW IOMMU in the system */
int iommu_detected __read_mostly = 0;
-/*
- * This variable becomes 1 if iommu=pt is passed on the kernel command line.
- * If this variable is 1, IOMMU implementations do no DMA translation for
- * devices and allow every device to access to whole physical memory. This is
- * useful if a user wants to use an IOMMU only for KVM device assignment to
- * guests and not for driver dma translation.
- * It is also possible to disable by default in kernel config, and enable with
- * iommu=nopt at boot time.
- */
-#ifdef CONFIG_IOMMU_DEFAULT_PASSTHROUGH
-int iommu_pass_through __read_mostly = 1;
-#else
-int iommu_pass_through __read_mostly;
-#endif
-
extern struct iommu_table_entry __iommu_table[], __iommu_table_end[];
/* Dummy device used for NULL arguments (normally ISA). */
@@ -139,10 +125,23 @@ static __init int iommu_setup(char *p)
if (!strncmp(p, "soft", 4))
swiotlb = 1;
#endif
+
+ /*
+ * IOMMU implementations do no DMA translation for devices and
+ * allow every device to access to whole physical memory. This
+ * is useful if a user wants to use an IOMMU only for KVM
+ * device assignment to guests and not for driver dma
+ * translation.
+ */
if (!strncmp(p, "pt", 2))
- iommu_pass_through = 1;
- if (!strncmp(p, "nopt", 4))
- iommu_pass_through = 0;
+ iommu_default_dma_mode_set(IOMMU_DMA_MODE_PASSTHROUGH);
+
+ /*
+ * The default dma mode is lazy on X86. And if dma mode is
+ * already nopt, keep it no change.
+ */
+ if (!strncmp(p, "nopt", 4) && IOMMU_DMA_MODE_IS_PASSTHROUGH())
+ iommu_default_dma_mode_set(IOMMU_DMA_MODE_LAZY);
gart_parse_options(p);
diff --git a/drivers/iommu/Kconfig b/drivers/iommu/Kconfig
index 5dca666b22e6cd5..ace8cb467d742f9 100644
--- a/drivers/iommu/Kconfig
+++ b/drivers/iommu/Kconfig
@@ -78,7 +78,7 @@ choice
prompt "IOMMU dma mode"
depends on IOMMU_API
default IOMMU_DEFAULT_PASSTHROUGH if (PPC_POWERNV && PCI)
- default IOMMU_DEFAULT_LAZY if S390_IOMMU
+ default IOMMU_DEFAULT_LAZY if (AMD_IOMMU || INTEL_IOMMU || S390_IOMMU)
default IOMMU_DEFAULT_STRICT
help
This option allows IOMMU dma mode to be chose at build time, to
diff --git a/drivers/iommu/amd_iommu.c b/drivers/iommu/amd_iommu.c
index f7cdd2ab7f11f6c..44be42f1e887ea4 100644
--- a/drivers/iommu/amd_iommu.c
+++ b/drivers/iommu/amd_iommu.c
@@ -448,7 +448,7 @@ static int iommu_init_device(struct device *dev)
* invalid address), we ignore the capability for the device so
* it'll be forced to go into translation mode.
*/
- if ((iommu_pass_through || !amd_iommu_force_isolation) &&
+ if ((IOMMU_DMA_MODE_IS_PASSTHROUGH() || !amd_iommu_force_isolation) &&
dev_is_pci(dev) && pci_iommuv2_capable(to_pci_dev(dev))) {
struct amd_iommu *iommu;
@@ -2274,7 +2274,7 @@ static int amd_iommu_add_device(struct device *dev)
BUG_ON(!dev_data);
- if (iommu_pass_through || dev_data->iommu_v2)
+ if (IOMMU_DMA_MODE_IS_PASSTHROUGH() || dev_data->iommu_v2)
iommu_request_dm_for_dev(dev);
/* Domains are initialized for this device - have a look what we ended up with */
@@ -2479,7 +2479,7 @@ static void __unmap_single(struct dma_ops_domain *dma_dom,
start += PAGE_SIZE;
}
- if (amd_iommu_unmap_flush) {
+ if (IOMMU_DMA_MODE_IS_STRICT()) {
domain_flush_tlb(&dma_dom->domain);
domain_flush_complete(&dma_dom->domain);
dma_ops_free_iova(dma_dom, dma_addr, pages);
@@ -2853,10 +2853,10 @@ int __init amd_iommu_init_api(void)
int __init amd_iommu_init_dma_ops(void)
{
- swiotlb = (iommu_pass_through || sme_me_mask) ? 1 : 0;
+ swiotlb = (IOMMU_DMA_MODE_IS_PASSTHROUGH() || sme_me_mask) ? 1 : 0;
iommu_detected = 1;
- if (amd_iommu_unmap_flush)
+ if (IOMMU_DMA_MODE_IS_STRICT())
pr_info("IO/TLB flush on unmap enabled\n");
else
pr_info("Lazy IO/TLB flushing enabled\n");
diff --git a/drivers/iommu/amd_iommu_init.c b/drivers/iommu/amd_iommu_init.c
index 1b1378619fc9ec2..eae18aae2bafd39 100644
--- a/drivers/iommu/amd_iommu_init.c
+++ b/drivers/iommu/amd_iommu_init.c
@@ -166,8 +166,6 @@ struct ivmd_header {
to handle */
LIST_HEAD(amd_iommu_unity_map); /* a list of required unity mappings
we find in ACPI */
-bool amd_iommu_unmap_flush; /* if true, flush on every unmap */
-
LIST_HEAD(amd_iommu_list); /* list of all AMD IOMMUs in the
system */
@@ -2857,7 +2855,7 @@ static int __init parse_amd_iommu_options(char *str)
{
for (; *str; ++str) {
if (strncmp(str, "fullflush", 9) == 0)
- amd_iommu_unmap_flush = true;
+ iommu_default_dma_mode_set(IOMMU_DMA_MODE_STRICT);
if (strncmp(str, "off", 3) == 0)
amd_iommu_disabled = true;
if (strncmp(str, "force_isolation", 15) == 0)
diff --git a/drivers/iommu/amd_iommu_types.h b/drivers/iommu/amd_iommu_types.h
index 87965e4d964771b..724182f158523a1 100644
--- a/drivers/iommu/amd_iommu_types.h
+++ b/drivers/iommu/amd_iommu_types.h
@@ -743,12 +743,6 @@ struct unity_map_entry {
/* allocation bitmap for domain ids */
extern unsigned long *amd_iommu_pd_alloc_bitmap;
-/*
- * If true, the addresses will be flushed on unmap time, not when
- * they are reused
- */
-extern bool amd_iommu_unmap_flush;
-
/* Smallest max PASID supported by any IOMMU in the system */
extern u32 amd_iommu_max_pasid;
diff --git a/drivers/iommu/intel-iommu.c b/drivers/iommu/intel-iommu.c
index 28cb713d728ceef..57203f895382831 100644
--- a/drivers/iommu/intel-iommu.c
+++ b/drivers/iommu/intel-iommu.c
@@ -362,7 +362,6 @@ static int domain_detach_iommu(struct dmar_domain *domain,
static int dmar_map_gfx = 1;
static int dmar_forcedac;
-static int intel_iommu_strict;
static int intel_iommu_superpage = 1;
static int intel_iommu_sm;
static int iommu_identity_mapping;
@@ -453,7 +452,7 @@ static int __init intel_iommu_setup(char *str)
dmar_forcedac = 1;
} else if (!strncmp(str, "strict", 6)) {
pr_info("Disable batched IOTLB flush\n");
- intel_iommu_strict = 1;
+ iommu_default_dma_mode_set(IOMMU_DMA_MODE_STRICT);
} else if (!strncmp(str, "sp_off", 6)) {
pr_info("Disable supported super page\n");
intel_iommu_superpage = 0;
@@ -3408,7 +3407,7 @@ static int __init init_dmars(void)
iommu->flush.flush_iotlb(iommu, 0, 0, 0, DMA_TLB_GLOBAL_FLUSH);
}
- if (iommu_pass_through)
+ if (IOMMU_DMA_MODE_IS_PASSTHROUGH())
iommu_identity_mapping |= IDENTMAP_ALL;
#ifdef CONFIG_INTEL_IOMMU_BROKEN_GFX_WA
@@ -3749,7 +3748,7 @@ static void intel_unmap(struct device *dev, dma_addr_t dev_addr, size_t size)
freelist = domain_unmap(domain, start_pfn, last_pfn);
- if (intel_iommu_strict) {
+ if (IOMMU_DMA_MODE_IS_STRICT()) {
iommu_flush_iotlb_psi(iommu, domain, start_pfn,
nrpages, !freelist, 0);
/* free iova */
@@ -5460,7 +5459,7 @@ static void quirk_calpella_no_shadow_gtt(struct pci_dev *dev)
} else if (dmar_map_gfx) {
/* we have to ensure the gfx device is idle before we flush */
pci_info(dev, "Disabling batched IOTLB flush on Ironlake\n");
- intel_iommu_strict = 1;
+ iommu_default_dma_mode_set(IOMMU_DMA_MODE_STRICT);
}
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x0040, quirk_calpella_no_shadow_gtt);
--
1.8.3
