Re: [PATCH v5 3/3] locking/rwsem: Optimize down_read_trylock()

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 03/22/2019 01:25 PM, Russell King - ARM Linux admin wrote:
> On Fri, Mar 22, 2019 at 10:30:08AM -0400, Waiman Long wrote:
>> Modify __down_read_trylock() to optimize for an unlocked rwsem and make
>> it generate slightly better code.
>>
>> Before this patch, down_read_trylock:
>>
>>    0x0000000000000000 <+0>:     callq  0x5 <down_read_trylock+5>
>>    0x0000000000000005 <+5>:     jmp    0x18 <down_read_trylock+24>
>>    0x0000000000000007 <+7>:     lea    0x1(%rdx),%rcx
>>    0x000000000000000b <+11>:    mov    %rdx,%rax
>>    0x000000000000000e <+14>:    lock cmpxchg %rcx,(%rdi)
>>    0x0000000000000013 <+19>:    cmp    %rax,%rdx
>>    0x0000000000000016 <+22>:    je     0x23 <down_read_trylock+35>
>>    0x0000000000000018 <+24>:    mov    (%rdi),%rdx
>>    0x000000000000001b <+27>:    test   %rdx,%rdx
>>    0x000000000000001e <+30>:    jns    0x7 <down_read_trylock+7>
>>    0x0000000000000020 <+32>:    xor    %eax,%eax
>>    0x0000000000000022 <+34>:    retq
>>    0x0000000000000023 <+35>:    mov    %gs:0x0,%rax
>>    0x000000000000002c <+44>:    or     $0x3,%rax
>>    0x0000000000000030 <+48>:    mov    %rax,0x20(%rdi)
>>    0x0000000000000034 <+52>:    mov    $0x1,%eax
>>    0x0000000000000039 <+57>:    retq
>>
>> After patch, down_read_trylock:
>>
>>    0x0000000000000000 <+0>:	callq  0x5 <down_read_trylock+5>
>>    0x0000000000000005 <+5>:	xor    %eax,%eax
>>    0x0000000000000007 <+7>:	lea    0x1(%rax),%rdx
>>    0x000000000000000b <+11>:	lock cmpxchg %rdx,(%rdi)
>>    0x0000000000000010 <+16>:	jne    0x29 <down_read_trylock+41>
>>    0x0000000000000012 <+18>:	mov    %gs:0x0,%rax
>>    0x000000000000001b <+27>:	or     $0x3,%rax
>>    0x000000000000001f <+31>:	mov    %rax,0x20(%rdi)
>>    0x0000000000000023 <+35>:	mov    $0x1,%eax
>>    0x0000000000000028 <+40>:	retq
>>    0x0000000000000029 <+41>:	test   %rax,%rax
>>    0x000000000000002c <+44>:	jns    0x7 <down_read_trylock+7>
>>    0x000000000000002e <+46>:	xor    %eax,%eax
>>    0x0000000000000030 <+48>:	retq
>>
>> By using a rwsem microbenchmark, the down_read_trylock() rate (with a
>> load of 10 to lengthen the lock critical section) on a x86-64 system
>> before and after the patch were:
>>
>>                  Before Patch    After Patch
>>    # of Threads     rlock           rlock
>>    ------------     -----           -----
>>         1           14,496          14,716
>>         2            8,644           8,453
>> 	4            6,799           6,983
>> 	8            5,664           7,190
>>
>> On a ARM64 system, the performance results were:
>>
>>                  Before Patch    After Patch
>>    # of Threads     rlock           rlock
>>    ------------     -----           -----
>>         1           23,676          24,488
>>         2            7,697           9,502
>>         4            4,945           3,440
>>         8            2,641           1,603
>>
>> For the uncontended case (1 thread), the new down_read_trylock() is a
>> little bit faster. For the contended cases, the new down_read_trylock()
>> perform pretty well in x86-64, but performance degrades at high
>> contention level on ARM64.
> So, 70% for 4 threads, 61% for 4 threads - does this trend
> continue tailing off as the number of threads (and cores)
> increase?
>
I didn't try higher number of contending threads. I won't worry too much
about contention as trylock is a one-off event. The chance of having
more than one trylock happening simultaneously is very small.

Cheers,
Longman




[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [Kernel Development]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Info]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Linux Media]     [Device Mapper]

  Powered by Linux