Re: [RESEND PATCH v5 4/6] coresight: Use PMU driver configuration for sink selection

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Suzuki K Poulose <suzuki.poulose@xxxxxxx> writes:

>> +	/*
>> +	 * The HW mapping of a component is unique.  If the value we've been
>> +	 * given matches the component's start address, then we must have found
>> +	 * the device we are looking for.
>> +	 */
>
> To be frank, I don't quite like the idea of passing the base address of the
> component as the key to locate a device, (even though that is unique and readily
> available). I would rather prefer a programmable way to map the keys to the
> "sink" devices, which works platform agnostic (e.g, ACPI support, where the base
> address is not obvious from the name). Also if we decide to use a platform
> agnostic naming scheme, it becomes even more complex.
>
> We could assign a static "id/key" exported either via the device sysfs dir or
> the "pmu" dir. I prefer the latter.
>
> Thoughts ?

So, my understanding is that we have a bunch of trace sources and a
bunch of trace sinks to choose from when we set up the perf event. The
current model basically treats trace sources as PMUs and relies on the
sink configuration process to be done via sysfs, which is not ideal as
an API.

The first thing that comes to mind is: can then the sinks be made their
own PMUs, so the above can be done via the existing SET_OUTPUT ioctl?

Regards,
--
Alex



[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [Kernel Development]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Info]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Linux Media]     [Device Mapper]

  Powered by Linux