Currently tests are run with the --kernel option of Qemu, which will
load the ELF file and jump to the start address. When booting from
disk, we need to specify a start address. This is done by setting the
initial short PSW at 0x0.
Signed-off-by: Janosch Frank <frankja@xxxxxxxxxxxxx>
---
s390x/cstart64.S | 9 ++++++++-
s390x/flat.lds | 8 +++++++-
2 files changed, 15 insertions(+), 2 deletions(-)
diff --git a/s390x/cstart64.S b/s390x/cstart64.S
index dc7ddd6..d382497 100644
--- a/s390x/cstart64.S
+++ b/s390x/cstart64.S
@@ -14,9 +14,16 @@
.section .init
-/* entry point - for KVM + TCG we directly start in 64 bit mode */
+/*
+ * Short init between 0x10000 and 0x10480 and then jump to 0x11000.
+ * 0x10480 - 0x11000 are written to by bootloader.
+ *
+ * For KVM and TCG kernel boot we are in 64 bit z/Arch mode.
+ * When booting from disk the initial short psw is in 31 bit mode.
+ */
.globl start
start:
+ sam64 # Set addressing mode to 64 bit
/* setup stack */
larl %r15, stackptr
/* setup initial PSW mask + control registers*/
diff --git a/s390x/flat.lds b/s390x/flat.lds
index b6e2172..7cfd9f9 100644
--- a/s390x/flat.lds
+++ b/s390x/flat.lds
@@ -1,10 +1,16 @@
SECTIONS
{
+ .lowcore : {
+ . = 0;
+ LONG(0x00080000)
+ LONG(0x80010000)
+ }
+ . = 0x10000;
.text : {
*(.init)
. = 0x480;
ipl_args = .;
- . = 0x600;
+ . = 0x1000;
*(.text)
*(.text.*)
}
--
2.14.3
