2 weeks ago we had a final one week bringup session with all involved folks for crypto passthrough: ap bus, kernel, libvirt. v7 is the result of the workshop + one additional week of testing and further fixing by Halil, Pierre and Michael. As Tony is on vacation, I am going to send out this patch set. From my point of view this is now stable interface-wise. Plan is that Tony acts as a maintainer, together with Halil and Pierre for the vfio-ap driver. As this is mostly related to the AP bus, this will go via Martin Schwidefskys tree (but with review on the kernel.org kvm and s390 list). When KVM code is involved, this will probably involve a topic branch that I will merge as well in kvm-next. Alex, Kirti: Can you have a look again and ack the vfio/mdev part? FWIW, the patches are also available at https://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux.git/log/?h=ap Notes: ===== Patches 1-6 (by Harald) posted with this series are forthcoming via Martins tree and are base changes in the ap driver/bus that we use as a foundation. They have been included here because some of the functions in this patch series are dependent upon them. Testers, the good news is that this patch series works with the v6 QEMU patches. The bad news is that there is no new QEMU patchset version yet. Limitations: =========== When an AP queue is bound to the vfio_ap driver and in use by a mediated device (assigned), it must not be reassigned back to the host zcrypt driver by the host admin. Otherwise the queue might be used in the host and guest at the same time. (A misconfiguration that acts as shoot yourself in the foot similar to giving a disk to two guests. We probably will fence this off in a later version) Abstract: ======== On s390, we have cryptographic coprocessor cards, which are modeled on Linux as devices on the AP bus. Each card can be partitioned into domains which can be thought of as a set of hardware registers for processing crypto commands. Crypto commands are sent to a specific domain within a card is via a queue which is identified as a (card,domain) tuple. We model this something like the following (assuming we have access to cards 3 and 4 and domains 1 and 2): AP -> card3 -> queue (3,1) -> queue (3,2) -> card4 -> queue (4,1) -> queue (4,2) If we want to virtualize this, we can use a feature provided by the hardware. We basically attach a satellite control block to our main hardware virtualization control block and the hardware takes care of most of the rest. For this control block, we don't specify explicit tuples, but a list of cards and a list of domains. The guest will get access to the cross product. Because of this, we need to take care that the lists provided to different guests don't overlap; i.e., we need to enforce sane configurations. Otherwise, one guest may get access to things like secret keys for another guest. The idea of this patch set is to introduce a new device, the matrix device. This matrix device hangs off a different root and acts as the parent node for mdev devices. If you now want to give the tuples (4,1) and (4,2), you need to do the following: - Make sure the queues (4,1) and (4,2) belong to vfio_ap (see patches #5 and #6) - Create the mediated device. - Assign card 4 and domains 1 and 2 to the mediated device - Optionally activate the mediated device. QEMU will now simply consume the mediated device and things should work. For a complete description of the architecture and concepts underlying the design, see the Documentation/s390/vfio-ap.txt file included with this patch set. v6 => v7 Change log: =================== * The AP bus gained the ability to designate queues as 'used by host' or as 'used by alternate driver(s)'. This allows us to authorise access (via the CRYCB) to queues that are not currently bound to the vfio_ap driver. If a vfio_ap owned queue diss- and reapears it's guaranteed to get bound back to the vfio_ap driver. * The mediated device gained an 'activate' attribute. Sharing conflicts are checked on activation now. If the device was not activated, the mdev open still implies activation. An active ap_matrix_mdev device claims it's resources -- an inactive does not. * An active ap_matrix_mdev device can not be removed. An ap_matrix_mdev that is hooked up with a guest can not be deactivated. * An active ap_matrix_mdev device rejects assign_* and deassign_* operations. Thus changing the CRYCB masks of a guest in order to accomplys certain hotplug scenarios is planned, but not supported yet. In previous versions it was possible to do those operations on a ap_matrix_mdev that is hooked up to a guest, but the changes would take effect on the next mdev_open. * Synchronisation was reworked. * The sysfs path of the parent device changed from /sys/devices/vfio_ap/matrix/ to /sys/devices/virtual/misc/vfio_ap/. The parent device is a misc device now. * The severity for most of the messages were reduced form error to warning. * We are not as thick headed about the zapq as we used to be in v6. v5 => v6 Change log: =================== * Added VSIE support - thanks to Pierre Morel * Added VFIO_DEVICE_RESET ioctl * Zeroizing AP queues when mediated device released and when VFIO_DEVICE_RESET ioctl is invoked * Removed /arch/s390/kvm/kvm-ap.c and arch/s390/include/asm/kvm-ap.h and moved guest matrix configuration into vfio driver * Removed temporary interfaces to be supplied by AP bus * Made the variable that keeps track of mdev instance count an atomic_t type * Removed code iterating through vm_list to determine if another guest has a queue .... not keep a list of matrix_mdev devices and verify against that list. Removes the need for the kvm_lock. * Added a sysfs attribute for the mediated matrix device to display the matrix contained in the guest's CRYCB if a guest is using the mdev. v4 => v5 Change log: =================== * Verify AP queues bound to driver in mediated device open callback, prior to configuring the matrix in the CRYCB * Implement VFIO_DEVICE_RESET ioctl * Zeroize queues on guest entry and exit * Removed vnet from all email IBM email addresses referenced * Add synchronization in mdev create/remove and open/release. * Added code to mdev open callback to ensure not more than one vfio-ap device can be opened by a guest. * Interpret AP instructions by default * Removed patch implementing interface to enable/disable AP interpretation, since that will now be done by default * Removed patch to reset crypto attributes for ALL vcpus. That will be submitted as a single patch since it will not be needed in this series - i.e., it was called from the interface to enable/disable AP instructions * All code for initializing crypto for a guest has been moved back to kvm-s390.c, kvm_s390_crypto_init(kvm) function * Maintaining a module reference count for the vfio_ap module so it is not removed while a guest with AP devices is running. v3 => v4 Change log: =================== * Resolved issue with enabling ZCRYPT when KVM is enabled by using #ifdef ZCRYPT in relevant functions * Added patch with a new function for resetting the crypto attributes for all vcpus to resolve the issue raised with running vcpus getting out of sync. * Removed KVM_S390_VM_CRYPTO_INTERPRET_AP: Setting interpretive exec mode from vfio_ap driver when mdev device is opened. v2 => v3 Change log: =================== * Set APIE in VCPU setup function * Renamed patch 13/15: KVM: s390: Configure the guest's CRYCB KVM: s390: Configure the guest's AP devices * Fixed problem with building arch/s390/kvm/kvm-ap.c when CONFIG_ZCRYPT not selected * Removed patch introducing VSIE support for AP pending further investigation * Initialized AP maximum mask sizes - i.e., APM, AQM and ADM - from info returned from PQAP(QCI) function * Introduced a new device attribute to the KVM_S390_VM_CRYPTO attribute group for setting a flag via the KVM_SET_DEVICE_ATTR ioctl to indicate whether ECA_APIE should be set or not. The flag is used in the kvm_s390_vcpu_crypto_setup() function to set ECA_APIE in the SIE block. v1 => v2 Change log: =================== * Added documentation vfio-ap.txt * Renamed vfio_ap_matrix module and device driver to vfio_ap * Use device core device list instead of maintaining list of matrix devices in driver * Added VSIE support for AP * Create matrix device before registering VFIO AP device driver with the AP bus * Renamed the following files in drivers/s390/crypto: * vfio_ap_matrix.drv -> vfio_ap_drv * vfio_ap_matrix_private.h -> vfio_ap_private.h * vfio_ap_matrix_ops.c -> vfio_ap_ops.c * arch/s390/include/asm/kvm/ap-matrix-config.h * Renamed to kvm-ap.h * Changed the data type of the bit mask fields for the matrix structure to unsigned long and create them with DECLARE_BITMAP * Changed #define prefixes from AP_MATRIX to KVM_AP * Changed function and structure prefixes from ap_matrix to kvm_ap * Added function interface to check if AP Extended Addressing (APXA) facility is installedCRYCB_FORMAT_MASK * Added function interface to get the maximum ID for AP mask type * Added function interface to set the AP execution mode * arch/s390/kvm/ap-matrix-config.c * Renamed to kvm-ap.c * Changed function prefixes from ap_matrix to kvm_ap * Added function to check if AP Extended Addressing (APXA) facility is installed * Added function to get the maximum ID for AP mask type * Added function to set the AP execution mode * Added a boolean parameter to the functions that retrieve the APM, AQM and ADM bit mask fields from the CRYCB. If true, then the function will clear the bits in the mask before returning a reference to it * Added validation to verify that APM, AQM and ADM bits that are set do not exceed the maximum ID value allowed * * arch/s390/include/asm/kvm_host.h * Changed defined for ECA_AP to ECA_APIE - interpretive execution mode * Added a flag to struct kvm_s390_crypto to indicate whether the KVM_S390_VM_CPU_FEAT_AP CPU model feature for AP facilities is set * Added two CPU facilities features to set STFLE.12 and STFLE.15 * arch/s390/kvm/kvm-s390.c * Added initialization for new KVM_S390_VM_CPU_FEAT_AP CPU model feature * Removed kvm_s390_apxa_installed() function * Changed call to kvm_s390_apxa_installed() which has been removed to a call to new kvm_ap_apxa_installed() function. * Added code to kvm_s390_vcpu_crypto_setup() to set the new CPU model feature flag in the kvm_s390_crypto structure * Added CRYCB_FORMAT_MASK to mask CRYCBD * arch/s390/tools/gen_facilities.c * Added STFLE.12 and STFLE.15 to struct facility _def * drivers/s390/crypto/vfio_ap_matrix_private.h * Changed name of file to vfio_ap.private.h * Changed #define prefixes from VFIO_AP_MATRIX to VFIO_AP * struct ap_matrix: removed list fields and locks * struct vfio_ap_queue: removed list field * Renamed functions ap_matrix_mdev_register and ap_matrix_mdev_unregister to vfio_ap_mdev_register and vfio_ap_mdev_unregister respectively * drivers/s390/crypto/vfio_ap_matrix_drv.c * Renamed file to drivers/s390/crypto/vfio_ap_drv.c * Changed all #define, structure and function prefixes to vfio_ap * probe function * Changed root device name for the matrix device to vfio_ap: i.e., /sys/devices/vfio_ap/matrix * No longer storing the AP queue device in a list, it is retrievablegit via the device core * Removed unnecessary check whether matrix device exists * Store the vfio_ap_queue structure in the private field of the ap_queue structure rather than using list interface * remove function * Retrieve vfio_ap_queue structure from the struct ap_queue private data rather than from a list * Removed unnecessary check * drivers/s390/crypto/vfio_ap_matrix_ops.c * Renamed file to vfio_ap_ops.c * Changed #define prefixes from AP_MATRIX to VFIO_AP * Changed function name prefixes from ap_matrix to vfio_ap * Removed ioctl to configure the CRYCB * create function * Removed ap_matrix_mdev_find_by_uuid() function - function is provided by mdev core * Removed available_instances verification, provided by mdev core * Removed check to see if mediated device exists, handled by mdev core * notifier function * Configuring matrix here instead of via ioctl * Set interpretive execution mode for all VCPUs * Removed R/O attributes to display adapters and domains * Added an R/O attribute to display the matrix * assign_control_domain mdev attribute: * Removed check to see if the domain is installed on the linux host * Added check to verify the control domain ID does not exceed the max value * assign_adapter mdev attribute: * Added check to verify the adapter ID does not exceed the max value * If any APQNs configured for the mediated matrix device that have an APID matching the adapter ID being assigned are not bound to the vfio_ap device driver then it is assumed that the APQN is bound to another driver and assignment will fail * assign_domain mdev attribute: * Added check to verify the domain ID does not exceed the max value * If any APQNs configured for the mediated matrix device that have an APQI matching the domain ID being assigned are not bound to the vfio_ap device driver then it is assumed that the APQN is bound to another driver and assignment will fail * tools/arch/s390/include/uapi/asm/kvm.h * removed KVM_S390_VM_CPU_FEAT_AP feature definition Harald Freudenberger (6): s390/zcrypt: Add ZAPQ inline function. s390/zcrypt: Review inline assembler constraints. s390/zcrypt: Show load of cards and queues in sysfs s390/zcrypt: Integrate ap_asm.h into include/asm/ap.h. s390/zcrypt: AP bus support for alternate driver(s) s390/zcrypt: Support for apmask and aqmask change on live system Pierre Morel (1): KVM: s390: Handling of Cypto control block in VSIE Tony Krowiak (15): KVM: s390: refactor crypto initialization s390: vfio-ap: base implementation of VFIO AP device driver s390: vfio-ap: register matrix device with VFIO mdev framework s390: vfio-ap: sysfs interfaces to configure adapters s390: vfio-ap: sysfs interfaces to configure domains s390: vfio-ap: sysfs interfaces to configure control domains s390: vfio-ap: sysfs interface to view matrix mdev matrix s390: vfio-ap: sysfs interface to activate mdev matrix KVM: s390: interfaces to clear CRYCB masks s390: vfio-ap: implement mediated device open callback s390: vfio-ap: implement VFIO_DEVICE_GET_INFO ioctl s390: vfio-ap: zeroize the AP queues. s390: vfio-ap: implement VFIO_DEVICE_RESET ioctl KVM: s390: CPU model support for AP virtualization Documentation/s390/vfio-ap.txt | 591 ++++++++++++++++ MAINTAINERS | 12 + arch/s390/Kconfig | 11 + arch/s390/include/asm/ap.h | 286 +++++++- arch/s390/include/asm/kvm_host.h | 6 + arch/s390/include/uapi/asm/kvm.h | 1 + arch/s390/kvm/kvm-s390.c | 110 +-- arch/s390/kvm/vsie.c | 224 +++++- arch/s390/tools/gen_facilities.c | 2 + drivers/s390/crypto/Makefile | 4 + drivers/s390/crypto/ap_asm.h | 236 ------- drivers/s390/crypto/ap_bus.c | 312 ++++++++- drivers/s390/crypto/ap_bus.h | 29 + drivers/s390/crypto/ap_card.c | 1 - drivers/s390/crypto/ap_queue.c | 1 - drivers/s390/crypto/vfio_ap_drv.c | 141 ++++ drivers/s390/crypto/vfio_ap_ops.c | 966 ++++++++++++++++++++++++++ drivers/s390/crypto/vfio_ap_private.h | 104 +++ drivers/s390/crypto/zcrypt_card.c | 12 + drivers/s390/crypto/zcrypt_cex2a.c | 2 + drivers/s390/crypto/zcrypt_cex4.c | 2 + drivers/s390/crypto/zcrypt_pcixcc.c | 2 + drivers/s390/crypto/zcrypt_queue.c | 12 + include/uapi/linux/vfio.h | 2 + 24 files changed, 2711 insertions(+), 358 deletions(-) create mode 100644 Documentation/s390/vfio-ap.txt delete mode 100644 drivers/s390/crypto/ap_asm.h create mode 100644 drivers/s390/crypto/vfio_ap_drv.c create mode 100644 drivers/s390/crypto/vfio_ap_ops.c create mode 100644 drivers/s390/crypto/vfio_ap_private.h -- 2.17.0 -- To unsubscribe from this list: send the line "unsubscribe linux-s390" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html