Changing a device's address lists (or its promisc mode) already triggers
an RX modeset, there's no need to do it manually from the L2 driver's
ndo_vlan_rx_kill_vid() hook.
Also when setting a device online, dev_open() already calls
dev_set_rx_mode(). So a manual modeset is only necessary from the
recovery path.
Signed-off-by: Julian Wiedmann <jwi@xxxxxxxxxxxxx>
---
drivers/s390/net/qeth_l2_main.c | 5 +----
drivers/s390/net/qeth_l3_main.c | 7 ++++---
2 files changed, 5 insertions(+), 7 deletions(-)
diff --git a/drivers/s390/net/qeth_l2_main.c b/drivers/s390/net/qeth_l2_main.c
index 2487f0aeb165..730ab51fbac5 100644
--- a/drivers/s390/net/qeth_l2_main.c
+++ b/drivers/s390/net/qeth_l2_main.c
@@ -26,7 +26,6 @@
static int qeth_l2_set_offline(struct ccwgroup_device *);
static int qeth_l2_stop(struct net_device *);
-static void qeth_l2_set_rx_mode(struct net_device *);
static void qeth_bridgeport_query_support(struct qeth_card *card);
static void qeth_bridge_state_change(struct qeth_card *card,
struct qeth_ipa_cmd *cmd);
@@ -344,7 +343,6 @@ static int qeth_l2_vlan_rx_kill_vid(struct net_device *dev,
rc = qeth_l2_send_setdelvlan(card, vid, IPA_CMD_DELVLAN);
kfree(tmpid);
}
- qeth_l2_set_rx_mode(card->dev);
return rc;
}
@@ -1125,13 +1123,12 @@ static int __qeth_l2_set_online(struct ccwgroup_device *gdev, int recovery_mode)
if (recovery_mode &&
card->info.type != QETH_CARD_TYPE_OSN) {
__qeth_l2_open(card->dev);
+ qeth_l2_set_rx_mode(card->dev);
} else {
rtnl_lock();
dev_open(card->dev);
rtnl_unlock();
}
- /* this also sets saved unicast addresses */
- qeth_l2_set_rx_mode(card->dev);
}
/* let user_space know that device is online */
kobject_uevent(&gdev->dev.kobj, KOBJ_CHANGE);
diff --git a/drivers/s390/net/qeth_l3_main.c b/drivers/s390/net/qeth_l3_main.c
index 5905dc63e256..a54881cdda82 100644
--- a/drivers/s390/net/qeth_l3_main.c
+++ b/drivers/s390/net/qeth_l3_main.c
@@ -2666,11 +2666,12 @@ static int __qeth_l3_set_online(struct ccwgroup_device *gdev, int recovery_mode)
qeth_enable_hw_features(card->dev);
if (recover_flag == CARD_STATE_RECOVER) {
rtnl_lock();
- if (recovery_mode)
+ if (recovery_mode) {
__qeth_l3_open(card->dev);
- else
+ qeth_l3_set_rx_mode(card->dev);
+ } else {
dev_open(card->dev);
- qeth_l3_set_rx_mode(card->dev);
+ }
rtnl_unlock();
}
qeth_trace_features(card);
--
2.16.4
--
To unsubscribe from this list: send the line "unsubscribe linux-s390" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
