On Thu, 28 Jun 2018, Thomas Gleixner wrote:
> I still want to document the unholy mess of what is initialized and
> available when. We have 5 hypervisors and 3 different points in early boot
> where the calibrate_* callbacks are overwritten. The XEN PV one is actually
> post tsc_init_early() for whatever reason.
>
> That's all completely obscure and any attempt of moving tsc_early_init()
> earlier than where it is now is just lottery.
>
> The other issue is that double calibration, e.g. doing the PIT thing twice
> is just consuming boot time for no value.
>
> All of that has been duct taped over time and we really don't want yet
> another thing glued to it just because we can.
So here is the full picture of the TSC/CPU calibration maze:
Compile time setup:
native_calibrate_tsc
CPUID based frequency read out with magic fixups
for broken CPUID implementations
native_calibrate_cpu
Try the following:
1) CPUID based (different leaf than the TSC one)
2) MSR based
3) Quick PIT calibration
4) PIT/HPET/PMTIMER calibration (slow) and only
available in tsc_init(). Could be made working
post x86_dtb_init().
Boot sequence:
start_kernel()
INTEL_MID:
x86_intel_mid_early_setup()
calibrate_tsc = intel_mid_calibrate_tsc
intel_mid_calibrate_tsc() { return 0; }
setup_arch()
x86_init.oem.arch_setup();
INTEL_MID:
intel_mid_arch_setup()
PENWELL:
x86_platform.calibrate_tsc = mfld_calibrate_tsc;
MSR based magic. Value would be available right away.
TANGIER:
x86_platform.calibrate_tsc = tangier_calibrate_tsc;
Different MSR based magic. Value would be available
right away.
....
init_hypervisor_platform()
vmware:
Retrieves frequency and store it for the
calibration function
khz = vmware_get_khz_magic()
vmware_tsc_khz = khz
calibrate_cpu = vmware_get_tsc_khz
calibrate_tsc = vmware_get_tsc_khz
preset_lpj(khz)
hyperv:
if special hyperv MSRs are available:
calibrate_cpu = hv_get_tsc_khz
calibrate_tsc = hv_get_tsc_khz
MSR is readable already in this function
jailhouse:
Frequency is available in this function and store
in a variable for the calibration function
calibrate_cpu = jailhouse_get_tsc
calibrate_tsc = jailhouse_get_tsc
...
kvmclock_init()
if (magic_conditions)
calibrate_tsc = kvm_get_tsc_khz
calibrate_cpu = kvm_get_tsc_khz
kvm_get_preset_lpj()
khz = kvm_get_tsc_khz()
preset_lpj(khz);
tsc_early_delay_calibrate()
tsc_khz = calibrate_tsc()
cpu_khz = calibrate_cpu()
....
set_lpj(tsc_khz);
x86_init.paging.pagetable_init()
xen_pagetable_init()
xen_setup_shared_info()
xen_hvm_init_time_ops()
if (XENFEAT_hvm_safe_pvclock)
calibrate_tsc = xen_tsc_khz
PV clock based access
tsc_init()
tsc_khz = calibrate_tsc()
cpu_khz = calibrate_cpu()
Putting this into a table:
Platform tsc_early_delay_calibrate() tsc_init()
-----------------------------------------------------------------------
Generic native_calibrate_tsc() native_calibrate_tsc()
native_calibrate_cpu() native_calibrate_cpu()
(Cannot do HPET/PMTIMER)
-----------------------------------------------------------------------
INTEL_MID intel_mid_calibrate_tsc() intel_mid_calibrate_tsc()
Generic native_calibrate_cpu() native_calibrate_cpu()
INTEL_MID mfld_calibrate_tsc() mfld_calibrate_tsc()
PENWELL native_calibrate_cpu() native_calibrate_cpu()
INTEL_MID tangier_calibrate_tsc() tangier_calibrate_tsc()
TANGIER native_calibrate_cpu() native_calibrate_cpu()
-----------------------------------------------------------------------
VNWARE vmware_get_tsc_khz() vmware_get_tsc_khz()
vmware_get_tsc_khz() vmware_get_tsc_khz()
HYPERV hv_get_tsc_khz() hv_get_tsc_khz()
hv_get_tsc_khz() hv_get_tsc_khz()
JAILHOUSE jailhouse_get_tsc() jailhouse_get_tsc()
jailhouse_get_tsc() jailhouse_get_tsc()
KVM kvm_get_tsc_khz() kvm_get_tsc_khz()
kvm_get_tsc_khz() kvm_get_tsc_khz()
------------------------------------------------------------------------
XEN native_calibrate_tsc() xen_tsc_khz()
native_calibrate_cpu() native_calibrate_cpu()
------------------------------------------------------------------------
The only platform which cannot use the special TSC calibration routine
in the early calibration is XEN because it's initialized just _after_ the
early calibration runs.
For enhanced fun the early calibration stuff was moved from right after
init_hypervisor_platform() to the place where it is now in commit
ccb64941f375a6 ("x86/timers: Move simple_udelay_calibration() past
kvmclock_init()") to speed up KVM boot time by avoiding the PIT
calibration. I have no idea why it wasn't just moved past the XEN
initialization a few lines further down, especially as the change was done
by a XEN maintainer :) Boris?
The other HV guests all do more or less the same thing and return the same
value for cpu_khz and tsc_khz via the calibration indirection despite the
value being known in the init_platform() function already.
The generic initilizaiton does everything twice, which makes no sense,
except for the unlikely case were no fast functions are available and the
quick PIT calibration fails (PMTIMER/HPET) are not available in early
calibration. HPET
The INTEL MID stuff is wierd and not really obvious. AFAIR those systems
don't have PIT or such, so they need to rely on the MSR/CPUID mechanisms to
work, but that's just working because and not for obvious reasons. Andy,
can you shed some light on that stuff?
So some of this just works by chance, things are done twice and pointlessly
(XEN). This really wants to be cleaned up and well documented which the
requirements of each platform are, especially the Intel-MID stuff needs
that.
Thanks,
tglx
--
To unsubscribe from this list: send the line "unsubscribe linux-s390" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
