On 14/03/2018 19:25, Tony Krowiak wrote:
Introduces a new AP device driver. This device driver is built on the VFIO mediated device framework. The framework provides sysfs interfaces that facilitate passthrough access by guests to devices installed on the linux host. The VFIO AP device driver will serve two purposes: 1. Provide the interfaces to reserve AP devices for exclusive use by KVM guests. This is accomplished by unbinding the devices to be reserved for guest usage from the default AP device driver and binding them to the VFIO AP device driver. 2. Implements the functions, callbacks and sysfs attribute interfaces required to create one or more VFIO mediated devices each of which will be used to configure the AP matrix for a guest and serve as a file descriptor for facilitating communication between QEMU and the VFIO AP device driver. When the VFIO AP device driver is initialized: * It registers with the AP bus for control of type 10 (CEX4 and newer) AP queue devices. The probe and remove callbacks will be provided to support the binding/unbinding of AP queue devices to/from the VFIO AP device driver. * Creates a /sys/devices/vfio-ap/matrix device to hold the APQNs of the AP devices bound to the VFIO AP device driver and serves as the parent of the mediated devices created for each guest. Signed-off-by: Tony Krowiak <akrowiak@xxxxxxxxxxxxxxxxxx> --- MAINTAINERS | 2 + arch/s390/Kconfig | 11 +++ drivers/s390/crypto/Makefile | 4 + drivers/s390/crypto/vfio_ap_drv.c | 135 +++++++++++++++++++++++++++++++++ drivers/s390/crypto/vfio_ap_private.h | 22 ++++++ include/uapi/linux/vfio.h | 2 + 6 files changed, 176 insertions(+), 0 deletions(-) create mode 100644 drivers/s390/crypto/vfio_ap_drv.c create mode 100644 drivers/s390/crypto/vfio_ap_private.h diff --git a/MAINTAINERS b/MAINTAINERS index 72742d5..f129253 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -11884,6 +11884,8 @@ W: http://www.ibm.com/developerworks/linux/linux390/ S: Supported F: arch/s390/include/asm/kvm/kvm-ap.h F: arch/s390/kvm/kvm-ap.c +F: drivers/s390/crypto/vfio_ap_drv.c +F: drivers/s390/crypto/vfio_ap_private.h S390 ZFCP DRIVER M: Steffen Maier <maier@xxxxxxxxxxxxxxxxxx> diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig index cbe1d97..58509db 100644 --- a/arch/s390/Kconfig +++ b/arch/s390/Kconfig @@ -771,6 +771,17 @@ config VFIO_CCW To compile this driver as a module, choose M here: the module will be called vfio_ccw. +config VFIO_AP + def_tristate m
not sure it must be module by default. I would not set it by default.
+ prompt "VFIO support for AP devices" + depends on ZCRYPT && VFIO_MDEV_DEVICE
VFIO_MDEV_DEVICE is a general feature *needed* by VFIO_AP and has no use case by its own. If it is set it is obviously because some mediated device drivers needs it. while ZCRYPT is a Z feature which may be set without VFIO_AP. So you need: config VFIO_AP def_tristate n prompt "VFIO support for AP devices" depends on ZCRYPT select VFIO_MDEV select VFIO_MDEV_DEVICE ... Pierre -- Pierre Morel Linux/KVM/QEMU in Böblingen - Germany -- To unsubscribe from this list: send the line "unsubscribe linux-s390" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html