Re: [RFC 4/5] s390x/cpumodel: enable AP facilities for guest

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 14.11.2017 16:11, Cornelia Huck wrote:
> On Thu, 26 Oct 2017 11:54:53 -0400
> Tony Krowiak <akrowiak@xxxxxxxxxxxxxxxxxx> wrote:
> 
>> Sets up the following STFLE bits to enable the specified AP
>> facilities for the guest VM:
>> 	* STFLE.12: Enables the AP Query Configuration Information
>>                     facility. The AP bus running in the guest uses
>>                     the information returned from this instruction
>>                     to configure AP adapters and domains for the
>>                     guest machine.
>> 	* STFLE.15: Enables the AP Special Command facility. The AP
>>                     bus running in the guest sets the T bit in
>>                     register 0 for the PQAP(TAPQ) instruction when
>>                     scanning for AP devices if this facility is
>>                     installed.
>>
>> These facilities are required in order for the AP bus running on
>> the KVM guest to function properly.
>>
>> Signed-off-by: Tony Krowiak <akrowiak@xxxxxxxxxxxxxxxxxx>
>> ---
>>  target/s390x/cpu_features.c     |    2 ++
>>  target/s390x/cpu_features_def.h |    2 ++
>>  target/s390x/gen-features.c     |    4 ++++
>>  3 files changed, 8 insertions(+), 0 deletions(-)
>>
>> diff --git a/target/s390x/cpu_features.c b/target/s390x/cpu_features.c
>> index 31a4676..63f002c 100644
>> --- a/target/s390x/cpu_features.c
>> +++ b/target/s390x/cpu_features.c
>> @@ -36,8 +36,10 @@ static const S390FeatDef s390_features[] = {
>>      FEAT_INIT("srs", S390_FEAT_TYPE_STFL, 9, "Sense-running-status facility"),
>>      FEAT_INIT("csske", S390_FEAT_TYPE_STFL, 10, "Conditional-SSKE facility"),
>>      FEAT_INIT("ctop", S390_FEAT_TYPE_STFL, 11, "Configuration-topology facility"),
>> +    FEAT_INIT("apqci", S390_FEAT_TYPE_STFL, 12, "Query Adjunct Processor Configuration facility"),
>>      FEAT_INIT("ipter", S390_FEAT_TYPE_STFL, 13, "IPTE-range facility"),
>>      FEAT_INIT("nonqks", S390_FEAT_TYPE_STFL, 14, "Nonquiescing key-setting facility"),
>> +    FEAT_INIT("apsc", S390_FEAT_TYPE_STFL, 15, "Adjunct Processor Special Command facility"),
> 
> Are there any interdependencies for those feature bits?

And just as a side node, CPU features should only be exposed once
migration support is fully in place (and usually bound to the flag for
compat handling).

(haven't had time yet to have a closer look, so just as a general comment)


-- 

Thanks,

David / dhildenb
--
To unsubscribe from this list: send the line "unsubscribe linux-s390" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [Kernel Development]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Info]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Linux Media]     [Device Mapper]

  Powered by Linux