On Tue, Jun 06, 2017 at 05:37:05PM +0200, Christian Borntraeger wrote:
> On 06/06/2017 05:27 PM, Heiko Carstens wrote:
> > On Tue, Jun 06, 2017 at 04:45:57PM +0200, Christian Borntraeger wrote:
> >> Adding s390 folks and list
> >>>> Only s390 is TSO, arm64 is very much a weak arch.
> >>>
> >>> Right, and thus arm64 can implement a fast this_cpu_inc using LL/SC.
> >>> s390 cannot because its atomic_inc has implicit memory barriers.
> >>>
> >>> s390's this_cpu_inc is *faster* than the generic one, but still pretty slow.
> >>
> >> FWIW, we improved the performance of local_irq_save/restore some time ago
> >> with commit 204ee2c5643199a2 ("s390/irqflags: optimize irq restore") and
> >> disable/enable seem to be reasonably fast (3-5ns on my system doing both
> >> disable/enable in a loop) on todays systems. So I would assume that the
> >> generic implementation would not be that bad.
> >>
> >> A the same time, the implicit memory barrier of the atomic_inc should be
> >> even cheaper. In contrast to x86, a full smp_mb seems to be almost for
> >> free (looks like <= 1 cycle for a bcr 14,0 and no contention). So I
> >> _think_ that this should be really fast enough.
> >>
> >> As a side note, I am asking myself, though, why we do need the
> >> preempt_disable/enable for the cases where we use the opcodes
> >> like lao (atomic load and or to a memory location) and friends.
> >
> > Because you want the atomic instruction to be executed on the local cpu for
> > which you have to per cpu pointer. If you get preempted to a different cpu
> > between the ptr__ assignment and lan instruction it might be executed not
> > on the local cpu. It's not really a correctness issue.
> >
> > #define arch_this_cpu_to_op(pcp, val, op) \
> > { \
> > typedef typeof(pcp) pcp_op_T__; \
> > pcp_op_T__ val__ = (val); \
> > pcp_op_T__ old__, *ptr__; \
> > preempt_disable(); \
> > ptr__ = raw_cpu_ptr(&(pcp)); \
> > asm volatile( \
> > op " %[old__],%[val__],%[ptr__]\n" \
> > : [old__] "=d" (old__), [ptr__] "+Q" (*ptr__) \
> > : [val__] "d" (val__) \
> > : "cc"); \
> > preempt_enable(); \
> > }
> >
> > #define this_cpu_and_4(pcp, val) arch_this_cpu_to_op(pcp, val, "lan")
> >
> > However in reality it doesn't matter at all, since all distributions we
> > care about have preemption disabled.
> >
> > So this_cpu_inc() should just generate three instructions: two to calculate
> > the percpu pointer and an additional asi for the atomic increment, with
> > operand specific serialization. This is supposed to be a lot faster than
> > disabling/enabling interrupts around a non-atomic operation.
> >
> > But maybe I didn't get the point of this thread :)
>
> I think on x86 a memory barrier is relatively expensive (e.g. 33 cycles for mfence
> on Haswell according to http://www.agner.org/optimize/instruction_tables.pdf). The
> thread started with a change to rcu, which now happens to use these percpu things
> more often so I think Paolos fear is that on s390 we now pay the price for an extra
> memory barrier due to that change. For the inc case (asi instruction) this should be
> really really cheap.
So what I am seeing from this is that there aren't any real performance
issues for this patch series. I will update accordingly. ;-)
Thanx, Paul
--
To unsubscribe from this list: send the line "unsubscribe linux-s390" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
