On Fri 03-03-17 18:34:22, Igor Mammedov wrote: > On Fri, 3 Mar 2017 09:27:23 +0100 > Michal Hocko <mhocko@xxxxxxxxxx> wrote: > > > On Thu 02-03-17 18:03:15, Igor Mammedov wrote: > > > On Thu, 2 Mar 2017 15:28:16 +0100 > > > Michal Hocko <mhocko@xxxxxxxxxx> wrote: > > > > > > > On Thu 02-03-17 14:53:48, Igor Mammedov wrote: > > > > [...] > > > > > When trying to support memory unplug on guest side in RHEL7, > > > > > experience shows otherwise. Simplistic udev rule which onlines > > > > > added block doesn't work in case one wants to online it as movable. > > > > > > > > > > Hotplugged blocks in current kernel should be onlined in reverse > > > > > order to online blocks as movable depending on adjacent blocks zone. > > > > > > > > Could you be more specific please? Setting online_movable from the udev > > > > rule should just work regardless of the ordering or the state of other > > > > memblocks. If that doesn't work I would call it a bug. > > > It's rather an implementation constrain than a bug > > > for details and workaround patch see > > > [1] https://bugzilla.redhat.com/show_bug.cgi?id=1314306#c7 > > > > "You are not authorized to access bug #1314306" > Sorry, > I've made it public, related comments and patch should be accessible now > (code snippets in BZ are based on older kernel but logic is still the same upstream) > > > could you paste the reasoning here please? > sure here is reproducer: > start VM with CLI: > qemu-system-x86_64 -enable-kvm -m size=1G,slots=2,maxmem=4G -numa node \ > -object memory-backend-ram,id=m1,size=1G -device pc-dimm,node=0,memdev=m1 \ > /path/to/guest_image > > then in guest dimm1 blocks are from 32-39 > > echo online_movable > /sys/devices/system/memory/memory32/state > -bash: echo: write error: Invalid argument > > in current mainline kernel it triggers following code path: > > online_pages() > ... > if (online_type == MMOP_ONLINE_KERNEL) { > if (!zone_can_shift(pfn, nr_pages, ZONE_NORMAL, &zone_shift)) > return -EINVAL; Are you sure? I would expect MMOP_ONLINE_MOVABLE here > zone_can_shift() > ... > if (idx < target) { > /* pages must be at end of current zone */ > if (pfn + nr_pages != zone_end_pfn(zone)) > return false; > > since we are trying to online as movable not the last section in > ZONE_NORMAL. > > Here is what makes hotplugged memory end up in ZONE_NORMAL: > acpi_memory_enable_device() -> add_memory -> add_memory_resource -> > -> arch/x86/mm/init_64.c > > /* > * Memory is added always to NORMAL zone. This means you will never get > * additional DMA/DMA32 memory. > */ > int arch_add_memory(int nid, u64 start, u64 size, bool for_device) > { > ... > struct zone *zone = pgdat->node_zones + > zone_for_memory(nid, start, size, ZONE_NORMAL, for_device); > > i.e. all hot-plugged memory modules always go to ZONE_NORMAL > and only the first/last block in zone is allowed to be moved > to another zone. Patch [1] tries to fix issue by assigning > removable memory resource to movable zone so hotplugged+removable > blocks look like: > movable normal, movable, movable > instead of current: > normal, normal, normal movable Hmm, this code is confusing and clean as mud. I have to stare there some more but AFAIK zones shouldn't have problems with holes so the only thing we have to guarantee is that different zones do not overlap. So this smells like a bug rather than the ineherent implementation limitation. [...] > > > > > Which means simple udev rule isn't usable since it gets event from > > > > > the first to the last hotplugged block order. So now we would have > > > > > to write a daemon that would > > > > > - watch for all blocks in hotplugged memory appear (how would it know) > > > > > - online them in right order (order might also be different depending > > > > > on kernel version) > > > > > -- it becomes even more complicated in NUMA case when there are > > > > > multiple zones and kernel would have to provide user-space > > > > > with information about zone maps > > > > > > > > > > In short current experience shows that userspace approach > > > > > - doesn't solve issues that Vitaly has been fixing (i.e. onlining > > > > > fast and/or under memory pressure) when udev (or something else > > > > > might be killed) > > > > > > > > yeah and that is why the patch does the onlining from the kernel. > > > onlining in this patch is limited to hyperv and patch breaks > > > auto-online on x86 kvm/vmware/baremetal as they reuse the same > > > hotplug path. > > > > Those can use the udev or do you see any reason why they couldn't? > > Reasons are above, under >>>> and >> quotations, patch breaks > what Vitaly's fixed (including kvm/vmware usecases) i.e. udev/some > user-space process could be killed if hotplugged memory isn't onlined > fast enough leading to service termination and/or memory not > being onlined at all (if udev is killed) OK, so from the discussion so far I have learned that this would be problem _only_ if we are trying to hotplug a _lot_ of memory at once (~1.5% of the online memory is needed). I am kind of skeptical this is a reasonable usecase. Who is going to hotadd 8G to 256M machine (which would eat half of the available memory which is still quite far from OOM)? Even if the memory balloning uses hotplug then such a grow sounds a bit excessive. > Currently udev rule is not usable and one needs a daemon > which would correctly do onlining and keep zone balance > even for simple case usecase of 1 normal and 1 movable zone. > And it gets more complicated in case of multiple numa nodes > with multiple zones. That sounds to be more related to the current implementation than anything else and as such is not a reason to invent specific user visible api. Btw. you are talking about movable zones byt the auto onlining doesn't allow to auto online movable memory. So either I miss your point or I am utterly confused. [...] > > > Memory unplug is rather new and it doesn't work reliably so far, > > > moving onlining to user-space won't really help. Further work > > > is need to be done so that it would work reliably. > > > > The main problem I have with this is that this is a limited usecase > > driven configuration knob which doesn't work properly for other usecases > > (namely movable online once your distribution choses to set the config > > option to auto online). > > it works for default usecase in Fedora and non-default > movable can be used with > 1) removable memory auto-online as movable in kernel, like > patch [1] would make movable hotplugged memory > (when I have time I'll try to work on it) > 2) (or in worst case due to lack of alternative) explicitly > disabled auto-online on kernel CLI + onlining daemon > (since udev isn't working in current kernel due to ordering issue) So I fail to see how this can work. Say the default will auto online all the added memory. This will be all in Zone Normal because the auto onlining doesn't do online_movable. Now I would like to online the memory as movable but that might fail because some kernel objects might be already sitting there so the offline would fail. > > There is a userspace solution for this so this > > shouldn't have been merged in the first place! > Sorry, currently user-space udev solution doesn't work nor > will it work reliably in extreme conditions. > > > It sneaked a proper review > > process (linux-api wasn't CC to get a broader attenttion) which is > > really sad. > > get_maintainer.pl doesn't lists linux-api for 31bc3858ea3e, > MAINTAINERS should be fixed if linux-api were to be CCed. user visible APIs _should_ be discussed at this mailing list regardless what get_maintainer.pl says. This is not about who is the maintainer but about getting as wide audience for things that would have to be maintained basically for ever. > > So unless this causes a major regression which would be hard to fix I > > will submit the patch for inclusion. > it will be a major regression due to lack of daemon that > could online fast and can't be killed on OOM. So this > clean up patch does break used feature without providing > a viable alternative. So let's discuss the current memory hotplug shortcomings and get rid of the crud which developed on top. I will start by splitting up the patch into 3 parts. Do the auto online thing from the HyperV and xen balloning drivers and dropping the config option and finally drop the sysfs knob. The last patch might be NAKed and I can live with that as long as the reasoning is proper and there is a general consensus on that. -- Michal Hocko SUSE Labs -- To unsubscribe from this list: send the line "unsubscribe linux-s390" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
