On Mon, 2011-07-11 at 10:07 -0400, Vivek Goyal wrote: > On Fri, Jul 08, 2011 at 04:02:18PM +0200, Michael Holzheu wrote: > > Hello Vivek, > > > > I attached a document where the s390 port is described in more detail. > > Perhaps this helps you to understand what want and what we are doing. If > > not - just delete it :-) > > > > Michael, > > Thanks for the documentation. I have gone through it quickly and there > are some parts I am still missing. > > On x86, after the kernel crash we jump to purgatory code which does the > checksum verification of all the loaded segments and if everything is > fine, it jumps to kdump kernel's entry point and second kernel boots. > > On s390, looks like after purgatory, control is going to some other > piece of code (which does IPL?), and that code decides whether to > start kdump kernel or launch stand alone kernel as backup plan? > > If yes, is that code whic does the IPL, also loaded in crashkernel memory > as part of kdump kernel? If not, how does kexec-tools come to know > where to jump after doing checksum on loaded kernel? On s390 currently we currently do not use the purgatory kexec-tools code at all. Therefore this checksum check is not done. We have defined a new kernel entry point for kdump at <crashk base> + 0x10008. When this entry point is used, the first instructions swap the area [0, crashk size] with [crashk base, crashk base + crashk size]. The information about crashk base and size is taken from meminfo. After the swap the Linux kernel is started with the information that we are in kdump mode and the information about crashk base and size (which is oldmem base and size now). There are different ways how the kdump entry point can be called on s390 depending on the setting (/sys/firmware) for "panic" and "restart" (something like NMI on intel). If you do not want the more reliable two stage approach with the stand-alone dump tools, it is also possible that the entry point is called directly via machine_kexec(). In this case the crashed kernel does the s390 specific checksum test and then jumps to <crashk base> + 0x10008. The more reliable solution with our stand-alone dump tools works as follows: 1. Stand-alone dump disk or tape is IPLed (booted). This can be done either automatically via the panic() kernel code path or manually by the operator of the (virtual) machine. 2. The stand-alone dump tool (mini OS) is loaded to 0x2000 under 0x10000. This area is always free and is not used by Linux on s390. 3. The stand-alone dump tool finds the crashkernel memory via meminfo that can be found via a pointer at address 0xe14. 4. The stand-alone verifies the kdump checksums and jumps to <crashk base> + 0x10008, if everything is ok. Michael -- To unsubscribe from this list: send the line "unsubscribe linux-s390" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html