From: Heiko Carstens <heiko.carstens@xxxxxxxxxx>
All in sysinfo.c is core kernel code and not driver code. So move it
to arch/s390/kernel. Also includes some small cleanups.
Signed-off-by: Heiko Carstens <heiko.carstens@xxxxxxxxxx>
Signed-off-by: Martin Schwidefsky <schwidefsky@xxxxxxxxxx>
---
arch/s390/kernel/Makefile | 4
arch/s390/kernel/sysinfo.c | 428 +++++++++++++++++++++++++++++++++++++++++
drivers/s390/Makefile | 4
drivers/s390/sysinfo.c | 469 ---------------------------------------------
4 files changed, 432 insertions(+), 473 deletions(-)
Index: quilt-2.6/arch/s390/kernel/Makefile
===================================================================
--- quilt-2.6.orig/arch/s390/kernel/Makefile
+++ quilt-2.6/arch/s390/kernel/Makefile
@@ -17,10 +17,12 @@ CFLAGS_smp.o := -Wno-nonnull
#
CFLAGS_ptrace.o += -DUTS_MACHINE='"$(UTS_MACHINE)"'
+CFLAGS_sysinfo.o += -Iinclude/math-emu -Iarch/s390/math-emu -w
+
obj-y := bitmap.o traps.o time.o process.o base.o early.o setup.o \
processor.o sys_s390.o ptrace.o signal.o cpcmd.o ebcdic.o \
s390_ext.o debug.o irq.o ipl.o dis.o diag.o mem_detect.o \
- vdso.o vtime.o
+ vdso.o vtime.o sysinfo.o
obj-y += $(if $(CONFIG_64BIT),entry64.o,entry.o)
obj-y += $(if $(CONFIG_64BIT),reipl64.o,reipl.o)
Index: quilt-2.6/arch/s390/kernel/sysinfo.c
===================================================================
--- /dev/null
+++ quilt-2.6/arch/s390/kernel/sysinfo.c
@@ -0,0 +1,428 @@
+/*
+ * Copyright IBM Corp. 2001, 2009
+ * Author(s): Ulrich Weigand <Ulrich.Weigand@xxxxxxxxxx>,
+ * Martin Schwidefsky <schwidefsky@xxxxxxxxxx>,
+ */
+
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/proc_fs.h>
+#include <linux/seq_file.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/module.h>
+#include <asm/ebcdic.h>
+#include <asm/sysinfo.h>
+#include <asm/cpcmd.h>
+
+/* Sigh, math-emu. Don't ask. */
+#include <asm/sfp-util.h>
+#include <math-emu/soft-fp.h>
+#include <math-emu/single.h>
+
+static inline int stsi_0(void)
+{
+ int rc = stsi(NULL, 0, 0, 0);
+ return rc == -ENOSYS ? rc : (((unsigned int) rc) >> 28);
+}
+
+static int stsi_1_1_1(struct sysinfo_1_1_1 *info, char *page, int len)
+{
+ if (stsi(info, 1, 1, 1) == -ENOSYS)
+ return len;
+
+ EBCASC(info->manufacturer, sizeof(info->manufacturer));
+ EBCASC(info->type, sizeof(info->type));
+ EBCASC(info->model, sizeof(info->model));
+ EBCASC(info->sequence, sizeof(info->sequence));
+ EBCASC(info->plant, sizeof(info->plant));
+ EBCASC(info->model_capacity, sizeof(info->model_capacity));
+ EBCASC(info->model_perm_cap, sizeof(info->model_perm_cap));
+ EBCASC(info->model_temp_cap, sizeof(info->model_temp_cap));
+ len += sprintf(page + len, "Manufacturer: %-16.16s\n",
+ info->manufacturer);
+ len += sprintf(page + len, "Type: %-4.4s\n",
+ info->type);
+ if (info->model[0] != '\0')
+ /*
+ * Sigh: the model field has been renamed with System z9
+ * to model_capacity and a new model field has been added
+ * after the plant field. To avoid confusing older programs
+ * the "Model:" prints "model_capacity model" or just
+ * "model_capacity" if the model string is empty .
+ */
+ len += sprintf(page + len,
+ "Model: %-16.16s %-16.16s\n",
+ info->model_capacity, info->model);
+ else
+ len += sprintf(page + len, "Model: %-16.16s\n",
+ info->model_capacity);
+ len += sprintf(page + len, "Sequence Code: %-16.16s\n",
+ info->sequence);
+ len += sprintf(page + len, "Plant: %-4.4s\n",
+ info->plant);
+ len += sprintf(page + len, "Model Capacity: %-16.16s %08u\n",
+ info->model_capacity, *(u32 *) info->model_cap_rating);
+ if (info->model_perm_cap[0] != '\0')
+ len += sprintf(page + len,
+ "Model Perm. Capacity: %-16.16s %08u\n",
+ info->model_perm_cap,
+ *(u32 *) info->model_perm_cap_rating);
+ if (info->model_temp_cap[0] != '\0')
+ len += sprintf(page + len,
+ "Model Temp. Capacity: %-16.16s %08u\n",
+ info->model_temp_cap,
+ *(u32 *) info->model_temp_cap_rating);
+ return len;
+}
+
+static int stsi_1_2_2(struct sysinfo_1_2_2 *info, char *page, int len)
+{
+ struct sysinfo_1_2_2_extension *ext;
+ int i;
+
+ if (stsi(info, 1, 2, 2) == -ENOSYS)
+ return len;
+ ext = (struct sysinfo_1_2_2_extension *)
+ ((unsigned long) info + info->acc_offset);
+
+ len += sprintf(page + len, "\n");
+ len += sprintf(page + len, "CPUs Total: %d\n",
+ info->cpus_total);
+ len += sprintf(page + len, "CPUs Configured: %d\n",
+ info->cpus_configured);
+ len += sprintf(page + len, "CPUs Standby: %d\n",
+ info->cpus_standby);
+ len += sprintf(page + len, "CPUs Reserved: %d\n",
+ info->cpus_reserved);
+
+ if (info->format == 1) {
+ /*
+ * Sigh 2. According to the specification the alternate
+ * capability field is a 32 bit floating point number
+ * if the higher order 8 bits are not zero. Printing
+ * a floating point number in the kernel is a no-no,
+ * always print the number as 32 bit unsigned integer.
+ * The user-space needs to know about the strange
+ * encoding of the alternate cpu capability.
+ */
+ len += sprintf(page + len, "Capability: %u %u\n",
+ info->capability, ext->alt_capability);
+ for (i = 2; i <= info->cpus_total; i++)
+ len += sprintf(page + len,
+ "Adjustment %02d-way: %u %u\n",
+ i, info->adjustment[i-2],
+ ext->alt_adjustment[i-2]);
+
+ } else {
+ len += sprintf(page + len, "Capability: %u\n",
+ info->capability);
+ for (i = 2; i <= info->cpus_total; i++)
+ len += sprintf(page + len,
+ "Adjustment %02d-way: %u\n",
+ i, info->adjustment[i-2]);
+ }
+
+ if (info->secondary_capability != 0)
+ len += sprintf(page + len, "Secondary Capability: %d\n",
+ info->secondary_capability);
+ return len;
+}
+
+static int stsi_2_2_2(struct sysinfo_2_2_2 *info, char *page, int len)
+{
+ if (stsi(info, 2, 2, 2) == -ENOSYS)
+ return len;
+
+ EBCASC(info->name, sizeof(info->name));
+
+ len += sprintf(page + len, "\n");
+ len += sprintf(page + len, "LPAR Number: %d\n",
+ info->lpar_number);
+
+ len += sprintf(page + len, "LPAR Characteristics: ");
+ if (info->characteristics & LPAR_CHAR_DEDICATED)
+ len += sprintf(page + len, "Dedicated ");
+ if (info->characteristics & LPAR_CHAR_SHARED)
+ len += sprintf(page + len, "Shared ");
+ if (info->characteristics & LPAR_CHAR_LIMITED)
+ len += sprintf(page + len, "Limited ");
+ len += sprintf(page + len, "\n");
+
+ len += sprintf(page + len, "LPAR Name: %-8.8s\n",
+ info->name);
+
+ len += sprintf(page + len, "LPAR Adjustment: %d\n",
+ info->caf);
+
+ len += sprintf(page + len, "LPAR CPUs Total: %d\n",
+ info->cpus_total);
+ len += sprintf(page + len, "LPAR CPUs Configured: %d\n",
+ info->cpus_configured);
+ len += sprintf(page + len, "LPAR CPUs Standby: %d\n",
+ info->cpus_standby);
+ len += sprintf(page + len, "LPAR CPUs Reserved: %d\n",
+ info->cpus_reserved);
+ len += sprintf(page + len, "LPAR CPUs Dedicated: %d\n",
+ info->cpus_dedicated);
+ len += sprintf(page + len, "LPAR CPUs Shared: %d\n",
+ info->cpus_shared);
+ return len;
+}
+
+static int stsi_3_2_2(struct sysinfo_3_2_2 *info, char *page, int len)
+{
+ int i;
+
+ if (stsi(info, 3, 2, 2) == -ENOSYS)
+ return len;
+ for (i = 0; i < info->count; i++) {
+ EBCASC(info->vm[i].name, sizeof(info->vm[i].name));
+ EBCASC(info->vm[i].cpi, sizeof(info->vm[i].cpi));
+ len += sprintf(page + len, "\n");
+ len += sprintf(page + len, "VM%02d Name: %-8.8s\n",
+ i, info->vm[i].name);
+ len += sprintf(page + len, "VM%02d Control Program: %-16.16s\n",
+ i, info->vm[i].cpi);
+
+ len += sprintf(page + len, "VM%02d Adjustment: %d\n",
+ i, info->vm[i].caf);
+
+ len += sprintf(page + len, "VM%02d CPUs Total: %d\n",
+ i, info->vm[i].cpus_total);
+ len += sprintf(page + len, "VM%02d CPUs Configured: %d\n",
+ i, info->vm[i].cpus_configured);
+ len += sprintf(page + len, "VM%02d CPUs Standby: %d\n",
+ i, info->vm[i].cpus_standby);
+ len += sprintf(page + len, "VM%02d CPUs Reserved: %d\n",
+ i, info->vm[i].cpus_reserved);
+ }
+ return len;
+}
+
+static int proc_read_sysinfo(char *page, char **start,
+ off_t off, int count,
+ int *eof, void *data)
+{
+ unsigned long info = get_zeroed_page(GFP_KERNEL);
+ int level, len;
+
+ if (!info)
+ return 0;
+
+ len = 0;
+ level = stsi_0();
+ if (level >= 1)
+ len = stsi_1_1_1((struct sysinfo_1_1_1 *) info, page, len);
+
+ if (level >= 1)
+ len = stsi_1_2_2((struct sysinfo_1_2_2 *) info, page, len);
+
+ if (level >= 2)
+ len = stsi_2_2_2((struct sysinfo_2_2_2 *) info, page, len);
+
+ if (level >= 3)
+ len = stsi_3_2_2((struct sysinfo_3_2_2 *) info, page, len);
+
+ free_page(info);
+ return len;
+}
+
+static __init int create_proc_sysinfo(void)
+{
+ create_proc_read_entry("sysinfo", 0444, NULL,
+ proc_read_sysinfo, NULL);
+ return 0;
+}
+device_initcall(create_proc_sysinfo);
+
+/*
+ * Service levels interface.
+ */
+
+static DECLARE_RWSEM(service_level_sem);
+static LIST_HEAD(service_level_list);
+
+int register_service_level(struct service_level *slr)
+{
+ struct service_level *ptr;
+
+ down_write(&service_level_sem);
+ list_for_each_entry(ptr, &service_level_list, list)
+ if (ptr == slr) {
+ up_write(&service_level_sem);
+ return -EEXIST;
+ }
+ list_add_tail(&slr->list, &service_level_list);
+ up_write(&service_level_sem);
+ return 0;
+}
+EXPORT_SYMBOL(register_service_level);
+
+int unregister_service_level(struct service_level *slr)
+{
+ struct service_level *ptr, *next;
+ int rc = -ENOENT;
+
+ down_write(&service_level_sem);
+ list_for_each_entry_safe(ptr, next, &service_level_list, list) {
+ if (ptr != slr)
+ continue;
+ list_del(&ptr->list);
+ rc = 0;
+ break;
+ }
+ up_write(&service_level_sem);
+ return rc;
+}
+EXPORT_SYMBOL(unregister_service_level);
+
+static void *service_level_start(struct seq_file *m, loff_t *pos)
+{
+ down_read(&service_level_sem);
+ return seq_list_start(&service_level_list, *pos);
+}
+
+static void *service_level_next(struct seq_file *m, void *p, loff_t *pos)
+{
+ return seq_list_next(p, &service_level_list, pos);
+}
+
+static void service_level_stop(struct seq_file *m, void *p)
+{
+ up_read(&service_level_sem);
+}
+
+static int service_level_show(struct seq_file *m, void *p)
+{
+ struct service_level *slr;
+
+ slr = list_entry(p, struct service_level, list);
+ slr->seq_print(m, slr);
+ return 0;
+}
+
+static const struct seq_operations service_level_seq_ops = {
+ .start = service_level_start,
+ .next = service_level_next,
+ .stop = service_level_stop,
+ .show = service_level_show
+};
+
+static int service_level_open(struct inode *inode, struct file *file)
+{
+ return seq_open(file, &service_level_seq_ops);
+}
+
+static const struct file_operations service_level_ops = {
+ .open = service_level_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = seq_release
+};
+
+static void service_level_vm_print(struct seq_file *m,
+ struct service_level *slr)
+{
+ char *query_buffer, *str;
+
+ query_buffer = kmalloc(1024, GFP_KERNEL | GFP_DMA);
+ if (!query_buffer)
+ return;
+ cpcmd("QUERY CPLEVEL", query_buffer, 1024, NULL);
+ str = strchr(query_buffer, '\n');
+ if (str)
+ *str = 0;
+ seq_printf(m, "VM: %s\n", query_buffer);
+ kfree(query_buffer);
+}
+
+static struct service_level service_level_vm = {
+ .seq_print = service_level_vm_print
+};
+
+static __init int create_proc_service_level(void)
+{
+ proc_create("service_levels", 0, NULL, &service_level_ops);
+ if (MACHINE_IS_VM)
+ register_service_level(&service_level_vm);
+ return 0;
+}
+subsys_initcall(create_proc_service_level);
+
+/*
+ * Bogomips calculation based on cpu capability.
+ */
+int get_cpu_capability(unsigned int *capability)
+{
+ struct sysinfo_1_2_2 *info;
+ int rc;
+
+ info = (void *) get_zeroed_page(GFP_KERNEL);
+ if (!info)
+ return -ENOMEM;
+ rc = stsi(info, 1, 2, 2);
+ if (rc == -ENOSYS)
+ goto out;
+ rc = 0;
+ *capability = info->capability;
+out:
+ free_page((unsigned long) info);
+ return rc;
+}
+
+/*
+ * CPU capability might have changed. Therefore recalculate loops_per_jiffy.
+ */
+void s390_adjust_jiffies(void)
+{
+ struct sysinfo_1_2_2 *info;
+ const unsigned int fmil = 0x4b189680; /* 1e7 as 32-bit float. */
+ FP_DECL_S(SA); FP_DECL_S(SB); FP_DECL_S(SR);
+ FP_DECL_EX;
+ unsigned int capability;
+
+ info = (void *) get_zeroed_page(GFP_KERNEL);
+ if (!info)
+ return;
+
+ if (stsi(info, 1, 2, 2) != -ENOSYS) {
+ /*
+ * Major sigh. The cpu capability encoding is "special".
+ * If the first 9 bits of info->capability are 0 then it
+ * is a 32 bit unsigned integer in the range 0 .. 2^23.
+ * If the first 9 bits are != 0 then it is a 32 bit float.
+ * In addition a lower value indicates a proportionally
+ * higher cpu capacity. Bogomips are the other way round.
+ * To get to a halfway suitable number we divide 1e7
+ * by the cpu capability number. Yes, that means a floating
+ * point division .. math-emu here we come :-)
+ */
+ FP_UNPACK_SP(SA, &fmil);
+ if ((info->capability >> 23) == 0)
+ FP_FROM_INT_S(SB, info->capability, 32, int);
+ else
+ FP_UNPACK_SP(SB, &info->capability);
+ FP_DIV_S(SR, SA, SB);
+ FP_TO_INT_S(capability, SR, 32, 0);
+ } else
+ /*
+ * Really old machine without stsi block for basic
+ * cpu information. Report 42.0 bogomips.
+ */
+ capability = 42;
+ loops_per_jiffy = capability * (500000/HZ);
+ free_page((unsigned long) info);
+}
+
+/*
+ * calibrate the delay loop
+ */
+void __cpuinit calibrate_delay(void)
+{
+ s390_adjust_jiffies();
+ /* Print the good old Bogomips line .. */
+ printk(KERN_DEBUG "Calibrating delay loop (skipped)... "
+ "%lu.%02lu BogoMIPS preset\n", loops_per_jiffy/(500000/HZ),
+ (loops_per_jiffy/(5000/HZ)) % 100);
+}
Index: quilt-2.6/drivers/s390/Makefile
===================================================================
--- quilt-2.6.orig/drivers/s390/Makefile
+++ quilt-2.6/drivers/s390/Makefile
@@ -2,9 +2,7 @@
# Makefile for the S/390 specific device drivers
#
-CFLAGS_sysinfo.o += -Iinclude/math-emu -Iarch/s390/math-emu -w
-
-obj-y += s390mach.o sysinfo.o
+obj-y += s390mach.o
obj-y += cio/ block/ char/ crypto/ net/ scsi/ kvm/
drivers-y += drivers/s390/built-in.o
Index: quilt-2.6/drivers/s390/sysinfo.c
===================================================================
--- quilt-2.6.orig/drivers/s390/sysinfo.c
+++ /dev/null
@@ -1,469 +0,0 @@
-/*
- * drivers/s390/sysinfo.c
- *
- * Copyright IBM Corp. 2001, 2008
- * Author(s): Ulrich Weigand (Ulrich.Weigand@xxxxxxxxxx)
- * Martin Schwidefsky <schwidefsky@xxxxxxxxxx>
- */
-
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/proc_fs.h>
-#include <linux/seq_file.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/module.h>
-#include <asm/ebcdic.h>
-#include <asm/sysinfo.h>
-#include <asm/cpcmd.h>
-
-/* Sigh, math-emu. Don't ask. */
-#include <asm/sfp-util.h>
-#include <math-emu/soft-fp.h>
-#include <math-emu/single.h>
-
-static inline int stsi_0(void)
-{
- int rc = stsi (NULL, 0, 0, 0);
- return rc == -ENOSYS ? rc : (((unsigned int) rc) >> 28);
-}
-
-static int stsi_1_1_1(struct sysinfo_1_1_1 *info, char *page, int len)
-{
- if (stsi(info, 1, 1, 1) == -ENOSYS)
- return len;
-
- EBCASC(info->manufacturer, sizeof(info->manufacturer));
- EBCASC(info->type, sizeof(info->type));
- EBCASC(info->model, sizeof(info->model));
- EBCASC(info->sequence, sizeof(info->sequence));
- EBCASC(info->plant, sizeof(info->plant));
- EBCASC(info->model_capacity, sizeof(info->model_capacity));
- EBCASC(info->model_perm_cap, sizeof(info->model_perm_cap));
- EBCASC(info->model_temp_cap, sizeof(info->model_temp_cap));
- len += sprintf(page + len, "Manufacturer: %-16.16s\n",
- info->manufacturer);
- len += sprintf(page + len, "Type: %-4.4s\n",
- info->type);
- if (info->model[0] != '\0')
- /*
- * Sigh: the model field has been renamed with System z9
- * to model_capacity and a new model field has been added
- * after the plant field. To avoid confusing older programs
- * the "Model:" prints "model_capacity model" or just
- * "model_capacity" if the model string is empty .
- */
- len += sprintf(page + len,
- "Model: %-16.16s %-16.16s\n",
- info->model_capacity, info->model);
- else
- len += sprintf(page + len, "Model: %-16.16s\n",
- info->model_capacity);
- len += sprintf(page + len, "Sequence Code: %-16.16s\n",
- info->sequence);
- len += sprintf(page + len, "Plant: %-4.4s\n",
- info->plant);
- len += sprintf(page + len, "Model Capacity: %-16.16s %08u\n",
- info->model_capacity, *(u32 *) info->model_cap_rating);
- if (info->model_perm_cap[0] != '\0')
- len += sprintf(page + len,
- "Model Perm. Capacity: %-16.16s %08u\n",
- info->model_perm_cap,
- *(u32 *) info->model_perm_cap_rating);
- if (info->model_temp_cap[0] != '\0')
- len += sprintf(page + len,
- "Model Temp. Capacity: %-16.16s %08u\n",
- info->model_temp_cap,
- *(u32 *) info->model_temp_cap_rating);
- return len;
-}
-
-#if 0 /* Currently unused */
-static int stsi_1_2_1(struct sysinfo_1_2_1 *info, char *page, int len)
-{
- if (stsi(info, 1, 2, 1) == -ENOSYS)
- return len;
-
- len += sprintf(page + len, "\n");
- EBCASC(info->sequence, sizeof(info->sequence));
- EBCASC(info->plant, sizeof(info->plant));
- len += sprintf(page + len, "Sequence Code of CPU: %-16.16s\n",
- info->sequence);
- len += sprintf(page + len, "Plant of CPU: %-16.16s\n",
- info->plant);
- return len;
-}
-#endif
-
-static int stsi_1_2_2(struct sysinfo_1_2_2 *info, char *page, int len)
-{
- struct sysinfo_1_2_2_extension *ext;
- int i;
-
- if (stsi(info, 1, 2, 2) == -ENOSYS)
- return len;
- ext = (struct sysinfo_1_2_2_extension *)
- ((unsigned long) info + info->acc_offset);
-
- len += sprintf(page + len, "\n");
- len += sprintf(page + len, "CPUs Total: %d\n",
- info->cpus_total);
- len += sprintf(page + len, "CPUs Configured: %d\n",
- info->cpus_configured);
- len += sprintf(page + len, "CPUs Standby: %d\n",
- info->cpus_standby);
- len += sprintf(page + len, "CPUs Reserved: %d\n",
- info->cpus_reserved);
-
- if (info->format == 1) {
- /*
- * Sigh 2. According to the specification the alternate
- * capability field is a 32 bit floating point number
- * if the higher order 8 bits are not zero. Printing
- * a floating point number in the kernel is a no-no,
- * always print the number as 32 bit unsigned integer.
- * The user-space needs to know about the strange
- * encoding of the alternate cpu capability.
- */
- len += sprintf(page + len, "Capability: %u %u\n",
- info->capability, ext->alt_capability);
- for (i = 2; i <= info->cpus_total; i++)
- len += sprintf(page + len,
- "Adjustment %02d-way: %u %u\n",
- i, info->adjustment[i-2],
- ext->alt_adjustment[i-2]);
-
- } else {
- len += sprintf(page + len, "Capability: %u\n",
- info->capability);
- for (i = 2; i <= info->cpus_total; i++)
- len += sprintf(page + len,
- "Adjustment %02d-way: %u\n",
- i, info->adjustment[i-2]);
- }
-
- if (info->secondary_capability != 0)
- len += sprintf(page + len, "Secondary Capability: %d\n",
- info->secondary_capability);
-
- return len;
-}
-
-#if 0 /* Currently unused */
-static int stsi_2_2_1(struct sysinfo_2_2_1 *info, char *page, int len)
-{
- if (stsi(info, 2, 2, 1) == -ENOSYS)
- return len;
-
- len += sprintf(page + len, "\n");
- EBCASC (info->sequence, sizeof(info->sequence));
- EBCASC (info->plant, sizeof(info->plant));
- len += sprintf(page + len, "Sequence Code of logical CPU: %-16.16s\n",
- info->sequence);
- len += sprintf(page + len, "Plant of logical CPU: %-16.16s\n",
- info->plant);
- return len;
-}
-#endif
-
-static int stsi_2_2_2(struct sysinfo_2_2_2 *info, char *page, int len)
-{
- if (stsi(info, 2, 2, 2) == -ENOSYS)
- return len;
-
- EBCASC (info->name, sizeof(info->name));
-
- len += sprintf(page + len, "\n");
- len += sprintf(page + len, "LPAR Number: %d\n",
- info->lpar_number);
-
- len += sprintf(page + len, "LPAR Characteristics: ");
- if (info->characteristics & LPAR_CHAR_DEDICATED)
- len += sprintf(page + len, "Dedicated ");
- if (info->characteristics & LPAR_CHAR_SHARED)
- len += sprintf(page + len, "Shared ");
- if (info->characteristics & LPAR_CHAR_LIMITED)
- len += sprintf(page + len, "Limited ");
- len += sprintf(page + len, "\n");
-
- len += sprintf(page + len, "LPAR Name: %-8.8s\n",
- info->name);
-
- len += sprintf(page + len, "LPAR Adjustment: %d\n",
- info->caf);
-
- len += sprintf(page + len, "LPAR CPUs Total: %d\n",
- info->cpus_total);
- len += sprintf(page + len, "LPAR CPUs Configured: %d\n",
- info->cpus_configured);
- len += sprintf(page + len, "LPAR CPUs Standby: %d\n",
- info->cpus_standby);
- len += sprintf(page + len, "LPAR CPUs Reserved: %d\n",
- info->cpus_reserved);
- len += sprintf(page + len, "LPAR CPUs Dedicated: %d\n",
- info->cpus_dedicated);
- len += sprintf(page + len, "LPAR CPUs Shared: %d\n",
- info->cpus_shared);
- return len;
-}
-
-static int stsi_3_2_2(struct sysinfo_3_2_2 *info, char *page, int len)
-{
- int i;
-
- if (stsi(info, 3, 2, 2) == -ENOSYS)
- return len;
- for (i = 0; i < info->count; i++) {
- EBCASC (info->vm[i].name, sizeof(info->vm[i].name));
- EBCASC (info->vm[i].cpi, sizeof(info->vm[i].cpi));
- len += sprintf(page + len, "\n");
- len += sprintf(page + len, "VM%02d Name: %-8.8s\n",
- i, info->vm[i].name);
- len += sprintf(page + len, "VM%02d Control Program: %-16.16s\n",
- i, info->vm[i].cpi);
-
- len += sprintf(page + len, "VM%02d Adjustment: %d\n",
- i, info->vm[i].caf);
-
- len += sprintf(page + len, "VM%02d CPUs Total: %d\n",
- i, info->vm[i].cpus_total);
- len += sprintf(page + len, "VM%02d CPUs Configured: %d\n",
- i, info->vm[i].cpus_configured);
- len += sprintf(page + len, "VM%02d CPUs Standby: %d\n",
- i, info->vm[i].cpus_standby);
- len += sprintf(page + len, "VM%02d CPUs Reserved: %d\n",
- i, info->vm[i].cpus_reserved);
- }
- return len;
-}
-
-
-static int proc_read_sysinfo(char *page, char **start,
- off_t off, int count,
- int *eof, void *data)
-{
- unsigned long info = get_zeroed_page (GFP_KERNEL);
- int level, len;
-
- if (!info)
- return 0;
-
- len = 0;
- level = stsi_0();
- if (level >= 1)
- len = stsi_1_1_1((struct sysinfo_1_1_1 *) info, page, len);
-
- if (level >= 1)
- len = stsi_1_2_2((struct sysinfo_1_2_2 *) info, page, len);
-
- if (level >= 2)
- len = stsi_2_2_2((struct sysinfo_2_2_2 *) info, page, len);
-
- if (level >= 3)
- len = stsi_3_2_2((struct sysinfo_3_2_2 *) info, page, len);
-
- free_page (info);
- return len;
-}
-
-static __init int create_proc_sysinfo(void)
-{
- create_proc_read_entry("sysinfo", 0444, NULL,
- proc_read_sysinfo, NULL);
- return 0;
-}
-
-__initcall(create_proc_sysinfo);
-
-/*
- * Service levels interface.
- */
-
-static DECLARE_RWSEM(service_level_sem);
-static LIST_HEAD(service_level_list);
-
-int register_service_level(struct service_level *slr)
-{
- struct service_level *ptr;
-
- down_write(&service_level_sem);
- list_for_each_entry(ptr, &service_level_list, list)
- if (ptr == slr) {
- up_write(&service_level_sem);
- return -EEXIST;
- }
- list_add_tail(&slr->list, &service_level_list);
- up_write(&service_level_sem);
- return 0;
-}
-EXPORT_SYMBOL(register_service_level);
-
-int unregister_service_level(struct service_level *slr)
-{
- struct service_level *ptr, *next;
- int rc = -ENOENT;
-
- down_write(&service_level_sem);
- list_for_each_entry_safe(ptr, next, &service_level_list, list) {
- if (ptr != slr)
- continue;
- list_del(&ptr->list);
- rc = 0;
- break;
- }
- up_write(&service_level_sem);
- return rc;
-}
-EXPORT_SYMBOL(unregister_service_level);
-
-static void *service_level_start(struct seq_file *m, loff_t *pos)
-{
- down_read(&service_level_sem);
- return seq_list_start(&service_level_list, *pos);
-}
-
-static void *service_level_next(struct seq_file *m, void *p, loff_t *pos)
-{
- return seq_list_next(p, &service_level_list, pos);
-}
-
-static void service_level_stop(struct seq_file *m, void *p)
-{
- up_read(&service_level_sem);
-}
-
-static int service_level_show(struct seq_file *m, void *p)
-{
- struct service_level *slr;
-
- slr = list_entry(p, struct service_level, list);
- slr->seq_print(m, slr);
- return 0;
-}
-
-static const struct seq_operations service_level_seq_ops = {
- .start = service_level_start,
- .next = service_level_next,
- .stop = service_level_stop,
- .show = service_level_show
-};
-
-static int service_level_open(struct inode *inode, struct file *file)
-{
- return seq_open(file, &service_level_seq_ops);
-}
-
-static const struct file_operations service_level_ops = {
- .open = service_level_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = seq_release
-};
-
-static void service_level_vm_print(struct seq_file *m,
- struct service_level *slr)
-{
- char *query_buffer, *str;
-
- query_buffer = kmalloc(1024, GFP_KERNEL | GFP_DMA);
- if (!query_buffer)
- return;
- cpcmd("QUERY CPLEVEL", query_buffer, 1024, NULL);
- str = strchr(query_buffer, '\n');
- if (str)
- *str = 0;
- seq_printf(m, "VM: %s\n", query_buffer);
- kfree(query_buffer);
-}
-
-static struct service_level service_level_vm = {
- .seq_print = service_level_vm_print
-};
-
-static __init int create_proc_service_level(void)
-{
- proc_create("service_levels", 0, NULL, &service_level_ops);
- if (MACHINE_IS_VM)
- register_service_level(&service_level_vm);
- return 0;
-}
-
-subsys_initcall(create_proc_service_level);
-
-/*
- * Bogomips calculation based on cpu capability.
- */
-
-int get_cpu_capability(unsigned int *capability)
-{
- struct sysinfo_1_2_2 *info;
- int rc;
-
- info = (void *) get_zeroed_page(GFP_KERNEL);
- if (!info)
- return -ENOMEM;
- rc = stsi(info, 1, 2, 2);
- if (rc == -ENOSYS)
- goto out;
- rc = 0;
- *capability = info->capability;
-out:
- free_page((unsigned long) info);
- return rc;
-}
-
-/*
- * CPU capability might have changed. Therefore recalculate loops_per_jiffy.
- */
-void s390_adjust_jiffies(void)
-{
- struct sysinfo_1_2_2 *info;
- const unsigned int fmil = 0x4b189680; /* 1e7 as 32-bit float. */
- FP_DECL_S(SA); FP_DECL_S(SB); FP_DECL_S(SR);
- FP_DECL_EX;
- unsigned int capability;
-
- info = (void *) get_zeroed_page(GFP_KERNEL);
- if (!info)
- return;
-
- if (stsi(info, 1, 2, 2) != -ENOSYS) {
- /*
- * Major sigh. The cpu capability encoding is "special".
- * If the first 9 bits of info->capability are 0 then it
- * is a 32 bit unsigned integer in the range 0 .. 2^23.
- * If the first 9 bits are != 0 then it is a 32 bit float.
- * In addition a lower value indicates a proportionally
- * higher cpu capacity. Bogomips are the other way round.
- * To get to a halfway suitable number we divide 1e7
- * by the cpu capability number. Yes, that means a floating
- * point division .. math-emu here we come :-)
- */
- FP_UNPACK_SP(SA, &fmil);
- if ((info->capability >> 23) == 0)
- FP_FROM_INT_S(SB, info->capability, 32, int);
- else
- FP_UNPACK_SP(SB, &info->capability);
- FP_DIV_S(SR, SA, SB);
- FP_TO_INT_S(capability, SR, 32, 0);
- } else
- /*
- * Really old machine without stsi block for basic
- * cpu information. Report 42.0 bogomips.
- */
- capability = 42;
- loops_per_jiffy = capability * (500000/HZ);
- free_page((unsigned long) info);
-}
-
-/*
- * calibrate the delay loop
- */
-void __cpuinit calibrate_delay(void)
-{
- s390_adjust_jiffies();
- /* Print the good old Bogomips line .. */
- printk(KERN_DEBUG "Calibrating delay loop (skipped)... "
- "%lu.%02lu BogoMIPS preset\n", loops_per_jiffy/(500000/HZ),
- (loops_per_jiffy/(5000/HZ)) % 100);
-}
--
blue skies,
Martin.
"Reality continues to ruin my life." - Calvin.
--
To unsubscribe from this list: send the line "unsubscribe linux-s390" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
